Hi, I want to put a different mount on top of the Eagle Pier and need to design an adapter. Does somebody have a diagram with exact dimensions of the top of it? Thanks Mark

I have AP 1600GTO with PEM training running around +/- 0.74. I have a 14” Edge HD @f11 and imaging with STXL 11K and guiding with its SXTL filter wheel/guider. I use Maxim DL with 8/8 X/Y

My experience has been that guiding camera exposure times will vary according to how steady the sky is. You want to have exposures long enough to average out the seeing so you aren’t chasing a

It seems that I read somewhere that shorterguide exposures are better, but I am not sure where I read that. In anycase I have always tried to go for 1 to 3 second guide exposures. I useMaxim DL-Pro

Mike, I use 3 or 4 seconds with my 12.5" Planewave / MMOAG. I "think" I'm running 4 seconds with my AP155 and Borg 60mm guidescope. Stuart Heggie http://www.stuartheggie.com/ --

Curious as to what people have for guider exposures forvarious systems. Was having some issues guiding my 1600/CDK 17/Maxim 5.18/STL6303E(guiding with camera) in that the stars were not always

> I worked with George at AstroPhysics on this issue. We reviewed all the settings and corrected those that > needed it. I’m enclosing an image of issue. When I start ACCP it doesn’t

Indeed. The only time my Pyramid shut down was in the summer heat. That week I placed a small fan to circulate the air around it and the problem went away.

I have the most recent version of APCC and Horizons and wanting to know that when I’m in the “Track Target” mode how do I reposition the object [Moon] but still retain tracking? According to

I worked with George at AstroPhysics on this issue. We reviewed all the settings and corrected those that needed it. I’m enclosing an image of issue. When I start ACCP it doesn’t AutoConnect,

Hi, You should be aware that under certain conditions, ANY Pyramid power supply, including the one sold through AP, may NOT reset its “thermal breaker” after a dropout, for upto a half

If you did a balance with the worm gear backed off, you may have backed off the worm in a forbidden position. The ONLY configuration that you can back off the worm is in Park3. If you tried to back

When new (November 2017) my Mach1GTO was very smooth. I could shoot 5 minute subs unguided at 480mm all night long. Now the RA has regular "lurches" (as I call them). See the PHD2 Guiding assistant

On Wed, Apr 29, 2020 at 06:01 PM, Rick Socarras wrote: AP has been busy! I was notified this Monday that my Mach 2 was ready! It's on it's way to me now and yes I'm very excited. Thankfully, the

Thanks guys, sorry for taking up you time. After I posted the question I opened up " Telescope Setup" and realized there was my answer. Since getting the mount recently I have very little time out

You enter these things in the "Telescope Setup" window. Rolando

Yes, you're on the list, a bit down but within reach ;^) Rolando

Wes, It comes from APCC or from the AP V2 driver. Regards, George George Whitney Astro-Physics, Inc. Phone: 815-282-1513 Email: george@...

On Wed, Apr 29, 2020 at 09:01 AM, Rick Socarras wrote: AP has been busy! I was notified this Monday that my Mach 2 was ready! It's on it's way to me now and yes I'm very excited. Thankfully, the

Trying to get my head around how the CP4 gets the time and location from a computer. I have read the manual for the CP4 and searched the topic on the group page. I understand the information from