I recommend the Radio Shack micorphone mentioned in the manual. And/or ifyou want to spend the money the microphone from Shure also mentioned in themanual available through Astro-Physics works very

out. Thanks Charles and thanks for the other responses. That's "sort of" what I had in mind but I will really need a male and female of the other smaller end in order to be able to thread it through

Hello everyone,What type of microphones and computer combinations have you found to work best with the DSV. My desktop is a Pentium II 350 with 128MB RAM, and my laptop is a Pentium 120 with 48MB

Hi Bobby, the power cord does seem to be very short for use in the field. I extended mine with a simple cigarette lighter extension cord which has a male on one end and a female on the other. You can

Hi Bobby; Glad to see you got your 1200 mount...you will be pleased. As to extension cords i can only tell you my experience. I had Roland make up for me the length of power cord I required from my

Using an extension is no problem, the power line for the a/p mounts are mearly carrying DC voltage, simply go to a hardware store and get a 'DC' cable extension ie: cigrette lighter feamle in to

Bob, Since you have in place below ground conduits, I would pull 3#12 wires (THHN type, +110, netural, ground) through the conduit to a new outlet above ground. I would also use GFI recepticles, for

I finally got a chance to get my 1200 goto up on my pier and now have a chance to pose some questions. The power supply cord is about 4' short of what I need to reach my 110v-12v convertor at the wall

Hello everyone, I have made a small change on the transporter room to explainthe fix info for the setup3.exe to use the alt/az voice and display issuethe 'actual position voice command' and/or

Loaded setup3.exe....no problems and new functions seem to work fine .... Derek Wong wrote: eGroups.com home: http://www.egroups.com/group/ap-gto www.egroups.com - Simplifying group communications

To all DSV users, I have just relessed 2.02.05, please see the WEB site for full details and download it from the Transporter Room. -= Charles Sinsofsky

Hi Derek, Please, let's get the ads off the bottom of each of our email messages to this list! Thanks, Rich ------------------------------------------------------------------------ eGroups.com

Before I start I'd like to thank the "father" of this group, Howard Lazarus. Without his hard work we would never have been here. I created a new AP user's e-group, ap-ug (make sure you put in

mark dambrosio wrote: Hi Mark: Sorry about verification #, but I don't know what it means--all I know is that you are on the list. Newsgroups like s.a.a. are fine, but there are several

I'm all for talking about AP equipment on saa. However, by having the equipment discussions on an email list you, hopefully, will cut out the comments by jerks who like to knock AP but have never

Why have this group in an e-mail group? Doesn't make much sense to me. Why not have just a regular newsgroup like sci astro?

Just another vote of confidence for a separate AP group. Derek, I'd be glad to help you manage this list also, let's set it up on egroup ASAP. Jim Fakatselis "Rich N."

Hi Derek, A separate list is a good idea. I would be happy to get on the second list

Hi, I was never sent a number when i set up Mark ------------------------------------------------------------------------ eGroups.com home: