Don, I don't think there is a N/S switch on the CP4. Stuart Heggie http://www.stuartheggie.com/ -- Stuart http://www.astrofoto.ca/stuartheggie/

TEST Mike J. Shade: mshade@q.com Mike J. Shade Photography: mshadephotography.com In War: Resolution In Defeat: Defiance In Victory: Magnanimity In Peace: Goodwill Sir Winston

Stuart Any chance the N/S switch got bumped to the wrong position? Don Anderson On Thursday, March 12, 2020,

Wayne If you have APCC Pro, see section 5.17 in the manual for some of the benefits. Bryan

Thanks Rolando! I will call George tomorrow. Stuart On Thu, Mar 12, 2020 at 5:03 PM uncarollo2 <chris1011@...> via Groups.Io <chris1011@...> wrote: --

Ray, Rolando - What features of the MG Box V2 does APCC or other A-P hardware/software take advantage of? Such as GPS or barometric information Wayne

Testing Park3 is definitely a good idea. For any new startups I generally run the mount thru all park positions before going to any object. If Venus coordinates are correct, then something else is

I did that and it went correctly to Park 3. Should have mentioned that. Stuart -- Stuart http://www.astrofoto.ca/stuartheggie/

I would still perform the easy test of sending it to park 3 to see what happens. -Christopher Erickson Observatory engineer Waikoloa, HI 96738 www.summitkinetics.com

Okay - have confirmed that I have the right Lat/Long and the keypad has the right values for , say, Venus but claims it is below the horizon when I issue the slew command via the keypad. That's after

Thanks Rolando. I will check that too. Just got home. Stuart On Thu, Mar 12, 2020 at 3:01 PM uncarollo2 <chris1011@...> via Groups.Io <chris1011@...> wrote: --

bring up an object but before sending it there press the < button to see the object data. If it looks wrong, it could be that your keypad battery has died and you will need to re-load the database

Gregg, I will check that. Great suggestion. Stuart -- Stuart http://www.astrofoto.ca/stuartheggie/

Stuart: Make sure that the driver has the correct Longitude; I seem to recall having a similar problem when moving my AP900 to a new location and the longitude kept reverting to East instead

Interesting possibility. I woke up in the night thinking that very thing but confirmed this morning that I'm indeed using Park 4. (I started using Park 1 with tracking off with the same result and

Try sending it to Park 3 and see where it goes. Maybe you have misremembered Park 4... -Christopher Erickson Observatory engineer Waikoloa, HI 96738 www.summitkinetics.com

All - my AP900GTO CP4 has been idle for over a year and with power OFF. I am putting it back into operation and am having a weird time getting the scope to find targets (like at all). When I power

Correct, Home = Park 3. And yes, none of the position values or time changed after the re-installation but for some reason the issue is gone at least for now. - Mikko

The NEAF organizers have released a statement regarding NEAF and NEAIC scheduled for April. Please see the official statement below my signatuare. We have no idea what the online event entails