Hi Richard, I do this all the time with my 12 year old AP1200GTO CP3, by setting the meridian delay in the V2 driver - note I do not have APCC. A positive number moves the 'meridian' east (earlier)

Sure, you can set a meridian delay value in the driver. APCC allows you to configure a dynamic meridian delay value that changes with declination and pier side. -Ray Gralak Author of APCC

Rick: Do you have APCC...either Standard or Pro? You can change the meridian limits in either to move the point of flip east or west as needed. Typically, we want to start CW up with the scope

Backlash correction seems to take a long time on my Mach 1 of late and for several steps ( star remains still ) , I don’t find any sloppiness in my mount when I physically try to wiggle it . Would

All, AP 1100 mount: It's often useful to start an imaging run with CW up to avoid an eventual meridian flip. Currently, to do that, I slew to the target with the usual default of landing there with

Hopefully northern Illinois is in for a run of clear nights!

Can some kind soul please post an actual image of the view through the RAPAS? How much more FOV is there beyond the outer ring for sig oct? All the images of the reticle show the sig oct ring at the

Uh oh. See what you've done?!

I’m here for y’all! I am good at finding obscure ways of breaking things.

I would love to test too ... in my home 😉

My services are free of charge. Just for you guys. 😉

We may do that Rolando

Let me know if you need help testing. (kidding... 🙂)

First batch is in testing, we will update as soon as they are packed and ready for shipping. We see the light at the end of the rainbow. Rolando

The web site was changed several weeks ago to say that shipments will begin this month. However, I haven't seen any of the necessary software updates [keypad, APCC-Pro, ASCOM driver] publicly

Dare I ask, have any Mach2s been shipped yet? Larry

Well as an update to this - seems that with SGP it's best to assign the plate solved image to the Sequence. Then ask it to center that way by right clicking on the Sequence target or ask SGP to

Hi Brian, I tend to take a series of images slowly shifting the scope and rotating the camera. When I am happy with this, I take a short exposure, plate solve this, and ask SGP to centre there. When I

John - How are you creating your target? If you are using SGP’s framing and mosaic wizard, I’ve noticed problems like this in the past few releases. I’ve seen when the image is brought up in

Thanks Ray, I have posted in SGP forumns but have not had a response. I should better explain the issue - I normally take a reference image once I have framed the object correctly, plate solve (this