Here are some more pics of the Mach2GTO, for your entertainment. https://ap-gto.groups.io/g/main/album?id=213170 I made a few amateurish vids as well and will share the links after I edit them a bit

Peter at this point it’s a user’s error issue as it’s well established that the software works. But again, it would help immensely if you quoted the emails you’re replying to. -Steve

I set it to FIT and that did not solve the problem. I tried last night with a ZWO 294 MC and had the same problem. At this point I wasted $250 for Pro. If the software will not perform for the

Is AP investigating this issue? I have had occasional drops with my iPad and SkySafari won’t reconnect unless I reboot the CP4. The iPad is still connected to the CP4 WiFi, but when I disconnect

I have the old Asus Nexus 7, I'll have to give it a try. I have been using the AP keypad but the database is somewhat limited and so I would like to get Sky Safari working too.

COOL TIP ALERT: I found that there is a free app called XePlayer (Google to find) for Windows 10 PCs. It allows me to run any Android app flawlessly on a Win 10 PC. I use it to run Sky Safari Pro on

This will work with Ipad or Iphone but will NOT work with most Android Tablets or Phones since Android does not support AdHoc wireless with the exception of older ASUS Android tablets. The latest

Thanks Robert. I didn't know that. I use Android. I am going to try my old SkyFi and if that doesn't work I will consider version 3 or should I get an ipad instead. Unless someone figures out how

I have both the original SkyFi and also the latest version 3. The difference is the original used AdHoc wireless which wasn't supported with most Android devices but Iphone/Ipad worked. The latest

Ray wrote the software, if he says it wont work with DLSR RAW file format, its a safe bet that he's right.

Hi Peter, have you tried take an image with your setup and then to solve it in the Pinpoint setup in APPM? Konstantin Konstantin v. Poschinger Hammerichstr. 5 22605 Hamburg 040/8805747 0171 1983476

The dark frame issue is a possibility...I will try unchecking.

It's not recommended because it's a safety feature, but you can do that by disabling Safety Park. BTW, the mount does not stop tracking immediately, but will stop within the Safety Park time

Hi All, When I exit APCC the mount tracking stops. How can that be prevented? Thanks, Gert

Here is a link with the theory behind directional drift due polar misalignment. May help. https://astrocamera.net/equipmnt/p-align/drift.htm Steve

Geof wrote: Geof, that's a good catch. Peter, you should turn off Dark Subtract. Also, Peter, I don't see a screen shot of the Plate Solve tab, so can you attach a screen shot of that tab. And, you

Not to beat this horse but you have been told several times that it needs to be FIT so why do you continue to try RAW as well? It also sounds like the image path is either incorrect or not set. Have

Hi, I know nothing of APPM/APPC, but I notice that you have the dark subtract checkbox checked, so do you have a dark frame to be applied to your light frame when performing plate solves. I may be way

Peter, this might have been addressed in the barrage of posts on this but I had a problem for a while that is similar to this and it turned out that the target folder had its privileges changed in a

A VERY good WIFI signal strength analyzer for Android phones (FREE) is .... https://play.google.com/store/apps/details?id=com.farproc.wifi.analyzer&hl=en_US Wifi Analyzer - Apps on Google Play Turns