If you can find the old Robin Casady saddles and tandem bars (no longer made sadly) on the used market I would recommend getting some as they are a step above anything else I've tried.

Hello all I explain you my problem. I have an AP 1200 GTO wich worked very well in my home with the AP V2 5.09.12, since I am in remote at the eye :http://entreencinasyestrellas.es/ My Driver was

Jinyoung, The Losmandy dual scope saddle works fine on my Mach1. I see no reason why the ADM wouldn’t work. But that said, I replaced the standard short AP two-clamp dovetail on my Mach1

Hi Ray, Thank you for your answer. That is what I will do while waiting the update, hoping I will not have issues with other software (french for ex.) Anyway, next days, the sky will be cloudy and the

Hi Alan, Unfortunately I just did that as I recently put all my cables through the mount and made sure all was tightened as I put things back together.

Hi Claude, I think this may be happening because of recent changes to allow extra precision to some of the commands. The AP Driver uses the ASCOM libraries to create RA/Dec strings for some of the

I have an ADM Losmandy-size, dual-saddle that I sometimes useon my 1100. Works fine. I put a C14 and AP 130 APO on the 1100together. With the adjustable bits it is rather heavy and I am not

If all else fails check the tightness of all of your screwed connections. Your bolting to your telescope; the bolting of the saddle to the mount; the bolting of the sections of your declination and

Hello Since Ascom driver version 5.09.09 I have issues because of the regional settings - decimal settings. I have a french Windows 10 version, with the default decimal setting set to comma, the

I am wondering if I may have an issue with my AP 1100 GTOmount. I’ve had it for a little over a year now and it has workedwithout issue. I am using it for astrophotography with a C11 Edge @ 2800mm

Hi, I'm almost about pulling trigger to new mach1gto. Question is how ADM dual saddle for the mount is. Does anyone use it? May I ask pros and cons? I already have ADM dual saddle for my AVX and not

Philip, There is only one Mr. Eclipse. We were set up quite near Fred at Casper College. He had to deal with the same, less-than-ideal conditions and drama that we did. It will be interesting to

This is quite fabulous - may I please propose an immediate promotion for you to Mr Eclipse MkII, with equal status to the legendary Fred Espenak! Philip --- Philip

Really amazing result Rolando! Stuart -- Stuart Heggie http://www.stuartheggie.com/featured.html

Thank you. I'm still amazed we got that much corona with the hazy atmosphere and smoke from the forest fires further west. I just finished adding my film images to this and we have an even larger

I have a 10"TPO truss tube with an Orion guide scope/ camera and a Canon T5 mounted on a Mach 1. Mount doesn't even know it's there. Mount slews and tracks perfectly, even without the guide scope

I use my Mach1GTO fitted with a C11 (non Edge model) for visual and astrophotography with the added weight of the Optec TCF-S focuser and STT8300 camera. I didn’t feel that the mount has any

I know Samara has a C11 Edge on her Mach1, perhaps she will comment? From what I've heard, it should not be a problem at all, if you are using an OAG for guiding, and it would be best if you are

I am at the same situation. Own a mach1 for 3 years (absolutely love it) and image with SVQ100. Looking for longer FL image setup too. -Kai

Hello All, According to Astronomics website, the weights and length (with focuser) of an AT 10" Truss RC are 36lb and 30" approximately so if a Mach 1 GTO can handle this OTA (stated above) then I