Ray , I'm looking forward to it Suresh

Hi Dr. Suresh, Sorry, I missed this post yesterday: Sure!! I will need to remove some debug code and make an installer. I'll try to get to that today but if I don't please give me a couple days.

Hi William, That's great! I hope you can enjoy the use of your Bluetooth adapter now. BTW, for anyone else with a Bluetooth device, I tested the IOGear Bluetooth adapter with APCC and it also worked

The Mach1 manual has been revised and posted to the Technical Support section of the website. http://www.astro-physics.com/tech_support/mounts/mach1gto/Mach1GTO_GTOCP4.pdf The 1100GTO and 1600GTO

Hello Ray, Yes, it does as you say for me also. I did not close and reopen the setup when testing the "Use ASCOM serial Object"check box was checked. Now my bluetooth adapter works when "Use ASCOM

Hi Ray , Since I'm an avid phd2 user , could I try your version ? Suresh

Friends I found it in the transportation box !! Thanks Suresh

Maybe that will be the case in the near future. :-))) -Ray Gralak Author of APCC (Astro-Physics Command Center): http://www.astro-physics.com/index.htm?products/accessories/software/apcc/apcc Author

Just wish it had the most robust guiding too😜 Dean

Guys you might there are three larger and smaller bolts on the back of the polar scope for making a adjustment , I just discovered that one of the larger bolt is missing , does anyone the size of

Hi Dr. Suresh, That's not very surprising. I think MaximDL, despite its issues, probably has the most extensive and robust camera control in the industry for Windows PCs. -Ray Gralak Author of APCC

Ray , My connection to lodestar disconnects in Phd 2 , I had it 10 times now , changed port , re started pc , nothing worked . Connected pempro via maxim dl - worked. Connected via Phd 1 -

Hi Gary, OK, let me know if you see anything as I think I have discovered a few bugs in the PHD2 code. Unfortunately the PHD2 developers have been difficult to work with so I have corrected the bugs

Donghun, I havethe larger diameter CW shaft on my Mach1 and like it very much. It'sshorter in length but much thicker in diameter -- and it takes the "standard" APcounter-weights instead of the

Thanks Roland, I like the solution of setting Autoconnect=YES. The mount is now in a real observatory on a pier, so there is no need to leave it at NO like I used to. Then I can transparently run it

Hi guys I'm currently using three 9lb counterweights and they are currently haning closes to the end of the 1.125" shaft on my Mach1GTO. To reduce moemtum arm, I'm thinkg of adding another

Hi Rick, I will bring my MacBook Pro from home in to work tomorrow (I’ll try to remember!) and see what I can figure out. There are no such restrictions on the GTOCP4 side, but TSX may be

Howard will answer in more detail about your particular setup, which I am assuming is a Mac computer. As such you are not using the ASCOM driver, so you are limited by what the SkyX can do via the

I am able to control my Mach1GTO with CP4 by serial port, USB, or Ethernet if it has been started up/initialized by the keypad (Autoconnect=NO). I use TheSkyX on a Mac But if I try to do the startup

Ray, I appreciate your inquiry into my experience using MACH1GTO with PHD2. I have only had the mount for 2 months so I only have about 30 hours of experience with that combination. Generally I have