Ross, It comes with a set of wing knobs. Regards, George George Whitney Astro-Physics, Inc. Phone: 815-282-1513 Email: george@...

Oh also removing the Dec plate and the RAPAS! I'm sure I'll do both those too.

Hi, George: Does the EAGLE6E8 also work with the old wood AWT000 tripod, fitted with an ADATRI? I am guessing that, if used in this manner, the base of the Mach1GTO would plop into the open top of the

Paul, also the tip on taking the Dec top plate off for carrying and taking the RAPAS off after alignment are excellent too. Thanks again,

Great. Do I need an extra set of knobs as well? Rgrds-Ross

Ross, We have the 8” Eagle Pier Extension (EAGLE6E8) which will work well with the Berlebach tripod. See: http://www.astro-physics.com/products/accessories/mounting_acc/eagle6.htm#extension

Great info Peter. I can tell right away that the AP knobs probably wouldn't have enough clearance. I may give those thumbscrews a try though. Thanks for the photo - it's worth a thousand words. Any

Congrats on receiving the mount. I also have this mount and ATS pier as well. I use the following thumbscrew: http://www.mcmaster.com/#91744a581/=s9g2u2 Also see my image

I have a Mach 1 with the Berlebach tripod. I'd like to put an extension on top of the tripod to help clear my cables from snagging and the scopes from hitting the tripod. Does AP manufacture such an

Wish I could help you, but I'm still out about 3 months on my ATS pier...

Just got my 1100 - what a beautiful piece of engineering and manufacturing! So many little improvements over the Mach1. Just the fact that you can take the Dec top plate off and on with 2 knobs,

Oh boy looks like a project! Thanks Ross Sent from my Samsung Galaxy Tab®|PRO

I also have a TAK 130 that is outfitted for photography at 46 pounds. It (Mach1) gives excellent guiding for photography. I also put an 11" Celestron Edge HD on it for photography with good

Thanks, Ray. Your suggestion to install ClassicShell was spot on. My AP1200 is now merrily Jogging along under control by AP V2 ASCOM Driver/Windows 8.1/VMware Fusion/MacMini. I think I might just

Ray, I will post the log files when I get home. I use Windows 7 and Mach1GTO. I'm not sure about the control box. Do you mean the chip revision? Thank you. Donghun

Hi Eric...... I have very interested in converting my setup to a RigRunner setup. Would you be kind enough to send me a list of the necessary components, perhaps a diagram of the connections/routing

There is a AP Log Zipper utility that is installed with the driver (it's mentioned in the help file). Also, which operating system, control box, and mount you are using? -Ray Gralak Author of

Try installing the (free) Classic Shell Start button replacement for Windows 8.x so that you can have easier access to the installed icons, one of which is for the AP Jog

I can tell you that the Mach I was at its absolute limit with a TEC 160FL F/7, and although it functioned well, I would not recommend that combination. DD

That's what I would do. For imaging I have an old laptop running XP, and they will have to pry it from my cold dead fingers when I croak. Rolando