I was allowed to place an order yesterday for the 1200 GTO mount, so I'm going over the A-P web site with a fine-toothed comb looking for other stuff I should get with it. I see that there is a

I will be taking delivery of an Astro Physics 1200 GTO mount around the end of August. It will be used in a permanent installation with a Newtonian telescope. I need a two foot high pier that will

Philip Perkins wrote: Your images are very impressing. Thank you again to everybody who helped me solve my 900 vs. 1200 problem. Now I will retract. I have arrived at a decision when white smoke

Philip Perkins wrote: Philip, Those are some AMAZING photos. Gosh, what fantastic work. Clear skies, Jeff

I agree Mark. In fact, I don't use cases for transporting my 1200 mount. It would add too much weight. I simply use a heavy blanket wrapped around each axis and carefully secure in my vehicle. The

Mark D'Ambrosio wrote: A friend of mine had cases for the 1200 made by Master Cases in Pacoima. Turned out great and very sturdy. This company makes cases for film equipment. Bob K.

"rich n." <rnap-@...> wrote: original article:http://www.egroups.com/group/ap-gto/?start=381 monitors. the 900 at the for away know if Mark ------ break down a 1200GTO (Roland's), I find the

I'll second Charles. To be precise, the 1200 is more than double the weight of the 900. 80 lbs is a weight to be truly reckoned with if you have to transport the mount long distances to dark

Thanks John. Rich

Mark, Tenba makes some very nice cases for the transport of computer monitors. These might work for parts of the 1200. I know that one will hold the 900 mount as one piece quite nicely. We used it

No. I'm still looking for cases to hold my 900. I've given up on finding a case to hold the 900 in one piece. Any suggestions would be much apprecitated. Rich

Have any of you folks who have a 1200 mount found suitable cases for the 1200 head. I don't really require ATA quality cases, and would prefer to stay away from an ATA type case's weight.and

Heavy? That's what the wheels are for. They are large enough to work across a lawn. It wasn't just an adjustment issue. If you got the mesh tight enough to remove enough backlash so that the backlash

I used one of the mid-size Pelican cases for my AP 400 QMD. I have since sold that mount in favor of a 600 GTO. I shipped the mount to the buyer in the Pelican case, so I no longer have the number

My 600 GTO would stall out at 1200x with a 20-pound load, even if it was balanced. The mount came back with what sounds like heftier motors and a slower top speed (600x instead of 1200x), and works

Thanks for the info. Gus, looks like the best of both worlds. Stephen

Hi Bobby, Thats exactly why I bought the guidescope. Thanks for the response. Stephen you

Hi Bob, I bought that 60mm GS from AP three years ago for the SDF and 130. With a Tak 5mm Guide eyepiece, I'm at 140x, which does begin to get dim for guiding. I'll try to keep within the FOV AMAP,

AP said I could buy the 48" pier only (the base, legs, and tension rods are the same), and a new set of turnbuckles to use with my current tension rods. Roland said with their 10" Mak-Cass on a 900,

Hi Dave, I'll give AP a call to get the details on the tension rods. Thanks, thought you interchange the piers since legs were the same. Stephen 54"