Bruce, People are notified only when it is certain they will be receiving an item from the current production run or a run about to start. There is *** NO *** scenario of you sending a deposit and

Hi, Check out Pelican's web page at: http://pelican.ca/cases_detail_specs.php?Case=1560 The list it at 20 pounds (9kg) with foam. Rick wondering

Sorry, the photos are in the files section as ScopeGuard AP Mach1 GTO Cases. Don

I noticed the thread on travel cases and thought I would show what we have to offer. Our SG/AP Mach1 GTO case continues to be a very popular model. I've added a folder with a few photos of the

Please see http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260191218062 ... I wonder if he accidentally reversed the digits. Okay, this is good to know since I am looking to go to Russia

See the files section under Mach1GTO Pelican 1560 case. IIRC the 1440s file shows the case open with the mount inside fully intact. The altitude has been adjusted to about 35 or 40 degrees and the RA

Yes and no. First off, the case does not weigh 42 pounds. Maybe 20 pounds but it could be less. Last time I flew with the Mach1, the case weighted in at 55 pounds. I took out the counterweight shaft,

Oops, I forgot to post to this group. Arrangements for another run of the tripod spreader originally sold by Richard Lapides has been made. Many people missed out on them in the past and have

Larry et al, The Pelican 1560 case weighs 42 lbs without the foam. I was wondering if the total weight (with foam and Mach1GTO) would exceed the limits imposed by airlines? Anthony.

I store/carry my Mach1 in a Pelican 1610, which is a really good fit. There is enough room for the mount, fully assembled, as well as the declination shaft and the knobs that bind the mount to the

Good info. I wondered how well the Mach1 would fit in a 1560 case without separating the two halves. Larry observing that had adapter cases

I have added three photos to the files section (Mach1GTO Travel Cases) that show a solution to transporting my Mach1GTO to observing sites and back to the house for storage. I don't need to ship

P.S. The azimuth adjuster block is on the plate. It is behind one of the black knobs and hard to see. ½" - nut plate. you from guide in washers pin as the with I <hfm5022@> I tap

Although it does not show it in the pictures I posted there is a ½" - 13 round head bolt under the adaptor plate. This bolt extends through the tripod head down to the spreader bar. I use a wing

;-) :-) ;-) :-) Anthony.

I also am on the Anacortes's list and received a similar email asking for a deposit and suggesting that we order some of the required accessories. I assumed that a Decmeber delivery was a bit

The AP900 on the Celestron Super HD tripod is a very solid transportable set-up for my AP155 EDF with piggy-backed ED80 guide scope. I presume the Meade tripod you have is equivalent. The

Thanks Edd, is your set-up stable? waht scope are you using with this arrangement? Sandy in an adaptor the found for tripod

THAT is a good one to be on <g> Herb York www.BuyTelescopes.com www.AstroMart.com www.Binocs.com

There are many parts associated with the mount and they are not quite finished yet. Please note that we have NOT accepted any orders for these mounts yet. You are probably on Herb's waiting list.