Nicolas: I should probably read ahead, but here goes: The problem with asking multiple client programs to support special interfaces is -- it defeats the whole reason for a driver in the first place.

Nicolas: I should probably read ahead, but here goes: The problem with asking multiple client programs to support special interfaces is -- it defeats the whole reason for a driver in the first place.

Hi Ray, Any chance of adding joystick support? I've gotten used to using my wireless logitech wingman with my CGE for slewing, changing button speeds, etc., and it would be great to have that

Hi Pete, I don't think this is normal. I suggest you run the diagnostic routine in PulseGuide and send the results to Roland. Also, 3 seconds of DEC backlash seems a bit excessive to me.

A quick question... In adjusting my DEC backlash today (which seems to be at about 3 seconds at 0.5x speed), I noticed that RA "jumps" a bit down when DEC is reversed. Is this a normal thing? Can it

Edd, There is a semi permasmile on my face thanks to the arrival of the AP160 and which is about to become a permanent permasmile with the arrival of the AP1200GTO. Oh how many times I have pulled

I've never seen a picture of Anthony, so I don't know what he looks like. but I can sure see him smiling ear-to-ear. Edd Weninger (AP1200/AP155 on 46" pier, slightly too low)

I ordered the 54" pier and hopefully will be able to provide feedback and experience shortly upon the arrival of the new AP1200GTO which will gracefully host my baby (AP160). Anthony.

I would go with the 48". I have the 24" on JMI wheely bars and am literally on the ground at zenith with a 6" f7 refractor and a diagonal... Mike Chapa http://www.chapaccd.com

For the version number, look under help. Microsoft can come up with some bizarre results at times if you look at the files properties. Dave

Hi Jeff, Wouldn't you be using a diagonal when using it with an eyepiece? That's my only input :-) Dave is too short, probably the visually. AP900 lower tad

Hi All, Has somebody tried the Palm 'Astromist' software with an AP mount? http://www.astromist.com/index.html Clear Skies, Gert

Ray I used Help--->"check for updates" in CCDSoft and it reported there were no updates. Good thing you directed me to the hotfix site. I previously reported using CCDSoft version version 5.1.5.9

"Ray Gralak" <rgr@...> wrote: Ray your support is outstanding! I will download the 12meg update (with dial-up) and take this laptop outside and hook it up and try it. If it works the hamburgers and

Hi Steve, I think you need to update to the latest version of CCDSoft (5.00.175): http://www.bisque.com/hotfixes -Ray

I am trying to use PemProAP for the first time and all went well until I tried to connect to the camera. When I try to connect to camera (with CCDSoft option) it does NOT launch CCDSoft and fails to

Thanks again, Ray. As I said, this problem has only happened to me about 2 times in the last 2 years. I appreciate your thinking through the issues on this. Hope the development goes

Hi John, I've suggested to Roland in the past that there should be a more rigid packet protocol like what Bisque uses. In fact, that is what I thought he meant in his message about a week ago. And

Hi John, Yes, the protocol will have built-in retries, asynchronous callbacks when possible, an MD5 checksum with an optional password so that someone cannot blindly hack your PulseGuide server and

Hi Jim, Jim McMillan wrote: I identified three possibilities in my last post. I don't know which of the first two it is (I'm giving Bob the benefit of the doubt it is not ACP :-) remedy? Yes, If