Dennis, I like the large size. I have a large monitor, so maybe I am biased. Thanks for sharing it. Mark

I have used mine in all temperaturs from +35C down to -25C with no problems. The specs are just what they tested it to (if that). I did have an Edgeport die once after a close by lightening

The Edgeport has worked fine for me over several years with temps down to -15c. It even worked down at -22c one night. Its pretty robust. cheers, ...paul.

Dave, I have been considering the edgeport. Its specs say it should operate at 32 F or warmer. Were you in a very cold environment when you had your

Mark, Very impressive setup. I am considering an Edpeport/4, but they seem to have several models. Which model are you using? Does it work reliably on just the USB port for power? Ruben serial two

This is one of the densest galaxy clusters in the sky. I captured only about 1/9 of the total area with my 58 x 43 arc minute FOV. Takahashi E-160 astrograph @ f/3.3 LRGB 120:30:30:30 in ten-minute

dpersyk@... writes: I always like the larger images with the better resolution, even if I have to scroll some. Roland Christen

Hi Russ, AP mounts are great and can be had used. I got my AP1200 last year and will be selling it this year because my name was finally called. My new AP is due this summer. I will be selling my old

Russ I was just reviewing the postings and saw your chat. I am going to put on astromart next week an AP 1200 with a C-14 on it next week. I'm downsiezing to a AP 900 John Paul Russ Garrett

Russ -- Oh boy, do I feel your pain. I bought a 16" LX200GPS last summer. 8 months of frustration later I pulled the plug and started looking for a GEM. I preferred the AP1200 primarily for the

If you going to do that, any chance you could slip over to the StarFire production line and nab a 160 for me? 10% commission of course... You'll need a super strength wire and motor to get you back

I do not think I can wait that lonk for an AP1200 mount. I have had scope problems since last summer when I purchased the first RCX 14. Which is my fault for buying an RCX 14. Why wait longer for an

Hi Kent, I believe that a correction is appropriate. It was 5&1/2 years in 1999. I bet it is 21 years today. Rick were the order slots left way it for mounts

Thanks Mal Mal Speer Malco Precision Products www.malcoprecision.com

Here is the info: Central Florida Electric Cooperative Inc 1124 N Young Blvd P.O. Box 9 Chiefland , FL 32644 (352)493-2511 Dave (site you go to is:

I have a local Cell Tower which the red nighttime light has turned to the white strobe a couple weeks ago. Only the FCC Tower ID# is listed on the tower's sign. I've spent many hours both on the

Does anyone know the thickness of the AP 1200 Mount Base Plate? Mal

Ray I am interested in this thread as I do have problems from "power off after park then power on and initialise" status. At one time I used to just leave the power on and park but as Roland

Hi Mal, I just got a new one to replace my old style. The new one is 5/16" thick. I hope that helps. Bye for now, Dr. hoglan in calif.

...but they're well worth the wait.... it in November then that is FAST FAST FAST been on scope yet Behalf Of the order left it Great rates starting at 1¢/min. > > >