Date   

Re: Mountains and Dragons - IC1805

Jeff B
 

" I'm using the other one to test some accessories."

Curiosity abounds.  🤔😀

On Sat, Jan 30, 2021 at 11:05 AM Roland Christen via groups.io <chris1011=aol.com@groups.io> wrote:
I used just the 160 for this one. I'm using the other one to test some accessories.

Rolando



-----Original Message-----
From: Luca Marinelli <photo@...>
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Fri, Jan 29, 2021 7:08 pm
Subject: Re: [ap-gto] Mountains and Dragons - IC1805

That’s a beautiful image. Ha luminance worked a treat to tame down the noisy channels.

Did you use both telescopes to collect this data or only one?

Luca

On Jan 29, 2021, at 8:02 PM, Pete Mumbower via groups.io <pmumbower=hotmail.com@groups.io> wrote:

Wow that is a superb image, thin clouds or not. Well done. That Mach2 isn't sweating with that load!

Pete

--
Roland Christen
Astro-Physics


Re: Find my CP4!!! How annoying!

Ray Gralak
 

Hi Tom,

Thank you guys so much! The scanner worked. I had been entering the IP address manually and gave up at
192.168.1.155...it was 157 lol...
This is nuts though. The tool should be in the APPC or astro-physics folder. One should not have to go through
so many hoops to get this.
APCC has a function to find your CP4 if it is on your LAN and assigned an IP address by your router, which looks like the case from what you said above.

-Ray Gralak
Author of PEMPro
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Tom Blahovici
Sent: Saturday, January 30, 2021 9:22 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Find my CP4!!! How annoying!

Hi
Yes I know. However, you require a user name and password to get access to it.
Hence I was wondering if I needed to wait until Monday to get it.
Not very user friendly. If a person is at a remote site they could have wasted time going there. I can understand
that perhaps there is some considerations about intellectual property, but in this case, an IP scanner tool does
the same thing. Not to mention that if it is at a remote site, you don't necessarily have access to the serial
number.
IMO, It should just install with APPC.
Best regards, Tom



Re: Find my CP4!!! How annoying!

Tom Blahovici
 

Hi
Yes I know. However, you require a user name and password to get access to it.
Hence I was wondering if I needed to wait until Monday to get it.
Not very user friendly. If a person is at a remote site they could have wasted time going there. I can understand that perhaps there is some considerations about intellectual property, but in this case, an IP scanner tool does the same thing.  Not to mention that if it is at a remote site, you don't necessarily have access to the serial number.
IMO, It should just install with APPC.
Best regards, Tom


Re: Find my CP4!!! How annoying!

Roland Christen
 


The tool should be in the APPC or astro-physics folder
We do have a tool on our website.

Rolando


-----Original Message-----
From: Tom Blahovici <tom.va2fsq@...>
To: main@ap-gto.groups.io
Sent: Fri, Jan 29, 2021 7:23 pm
Subject: Re: [ap-gto] Find my CP4!!! How annoying!

Thank you guys so much!  The scanner worked.  I had been entering the IP address manually and gave up at 192.168.1.155...it was 157 lol...
This is nuts though.  The tool should be in the APPC or astro-physics folder.  One should not have to go through so many hoops to get this.
Anyways, you guys saved my weekend.
I'm going to write a utility to do this myself and share it here if I can.
Thanks again!!!

--
Roland Christen
Astro-Physics


Re: Mountains and Dragons - IC1805

Roland Christen
 

I used just the 160 for this one. I'm using the other one to test some accessories.

Rolando



-----Original Message-----
From: Luca Marinelli <photo@...>
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Fri, Jan 29, 2021 7:08 pm
Subject: Re: [ap-gto] Mountains and Dragons - IC1805

That’s a beautiful image. Ha luminance worked a treat to tame down the noisy channels.

Did you use both telescopes to collect this data or only one?

Luca

On Jan 29, 2021, at 8:02 PM, Pete Mumbower via groups.io <pmumbower@...> wrote:

Wow that is a superb image, thin clouds or not. Well done. That Mach2 isn't sweating with that load!

Pete

--
Roland Christen
Astro-Physics


Re: Mountains and Dragons - IC1805

Willie Strickland <cwskas@...>
 

Excellent!

Willie


Re: Simple Mobile APP for control of mount

Bob
 

On Thu, Jan 28, 2021 at 09:38 AM, Mike Dodd wrote:
On 1/27/2021 8:20 PM, astro@... wrote:
... I do
hope to ultimately use the 1100 remotely.

Some details are on my website here:
<http://astronomy.mdodd.com/observatory.html#Remote>

(I almost never have to brave the cold to collect images. :-)

HTH.

--- Mike
Apologies Mike, I meant to reply to you before now. I looked at your website, and all I can say is WOW. Very impressive. I particularly like your use of a microcontroller. I see a lot of use for mc's like the Arduino and sbc's like the Raspberry Pi in remote observing.

Question for you, a little off topic I guess, but if your observatory was not 300 feet from your house but about 80 miles, would you feel confident in its operation? Assuming you had reliable comms between the two naturally.


Re: Simple Mobile APP for control of mount

Bob
 

On Fri, Jan 29, 2021 at 07:31 PM, Cheng-Yang Tan wrote:
I guess this is what you want, but running on a phone or pad
Yes, indeed. It certainly is not unheard of to have a mobile app mimicking a piece of hardware. I guess the user base and other connectivity options in this case hasn't warranted it.


Re: Simple Mobile APP for control of mount

Bob
 

On Fri, Jan 29, 2021 at 10:45 PM, Ray Gralak wrote:
Probably more a case of features I don't want. Essentially I would like an app that mimics the functionality of the
keypad. I don't want the planetarium bits. And before anyone says it, I know I could simply purchase the
hardware, but there are distinct advantages in an app being able to achieve this imho.
Then don't use the features you don't care about in the planetarium app. And BTW, the keypad has features the AP V2 ASCOM driver does not have, like an object catalog.
Yes, of course, that is obvious. And I do appreciate your other solutions. I just wanted to determine if such an app existed.

I may look at developing one now that I have some free time, observing catalog included :)

Thanks


Re: Find my CP4!!! How annoying!

Tom Blahovici
 

Found it.


Re: Mountains and Dragons - IC1805

 

a really stunning image. Great clarity, detail, and color

Brian

On Fri, Jan 29, 2021 at 4:52 PM Roland Christen via groups.io <chris1011=aol.com@groups.io> wrote:
Hello Astronuts,

Finally got around to processing the heart of the Heart nebula, IC 1805. This was a difficult image for me because of continual thin clouds that prevented getting some of the fainter narrowband data. I managed to shoot 10.5 hours of H-a but only 3.5 hours of OIII and 5.5 hours of SII. The latter two took a lot of noise reduction to bring in. Fortunately the main detail is in H-a, so I used that for a small amount of Luminance. Most of the frames were imaged unguided, the other half was guided.


160EDF with 155 EDF piggyback on the Mach2 mount, QSI 683WSG camera, Lodestar guide camera.

Rolando



--
Roland Christen
Astro-Physics



--
Brian 



Brian Valente


Re: Find my CP4!!! How annoying!

Tom Blahovici
 

Will do.

I also got a new router in the last few days, and this router does not show the IP address of the mount until it is connected. That is strange since my old one did.
I never had the issue before.
Can one put a static IP into the CP4?  I see no options to do so or is it in the web interface?
Tom


Re: Find my CP4!!! How annoying!

Pete Mumbower
 

Great to hear you got the new address. If you can log into your router, you can lock the CP4 to that address via a "reserve" function. Basically the router will only give that IP address to the CP4 mac address.

Pete


Re: Find my CP4!!! How annoying!

Tom Blahovici
 

Thank you guys so much!  The scanner worked.  I had been entering the IP address manually and gave up at 192.168.1.155...it was 157 lol...
This is nuts though.  The tool should be in the APPC or astro-physics folder.  One should not have to go through so many hoops to get this.
Anyways, you guys saved my weekend.
I'm going to write a utility to do this myself and share it here if I can.
Thanks again!!!


Re: Find my CP4!!! How annoying!

Pete Mumbower
 

If you have not tried it yet I would reboot the router, wait a couple of minutes, then reboot the CP4. The DHCP function in routers sometime puke out and will stop handing out IP addresses which the CP4 should be requesting on each power up.

Pete


Re: Find my CP4!!! How annoying!

Sébastien Doré
 

Hi Tom,

Three things I would try:

1) You could use an IP scanner utility (such as https://www.advanced-ip-scanner.com/) and scan the entire subnet (use the 3 first bytes of your computer's IP address + .0/24. e.g. if your IP is 192.168.0.16, type-in 192.168.0.0/24 in the search bar of the scanner app). If your CP4 actually has an IP address in the same subnet as your computer, it should find and list it.

2) Use the following math (from the CP4 manual) to calculate the default IP address and connect directly to your CP4 through an ethernet cable. Then change the IP address of your network card to 169.254.0.1 with subnet mask 255.255.0.0 :


3) If you still can't find it, use the IP scanner app again to scan the entire 169.254.0.0/16 subnet. That could take a couple of minutes as it  needs to go through the 65,000+ possible adresses, but should find it in the end.

Hope this helps...

Sébastien



De : main@ap-gto.groups.io <main@ap-gto.groups.io> de la part de Tom Blahovici <tom.va2fsq@...>
Envoyé : 29 janvier 2021 19:42
À : main@ap-gto.groups.io <main@ap-gto.groups.io>
Objet : [ap-gto] Find my CP4!!! How annoying!
 
Well, after a power failure I go out to use my scope and the IP address is changed.  Looking through my router, there is no indication of it.
So, read the manual and I have to download a JAVA applet.
It needs a user name and password!!!
Any alternatives or do I have to wait until Monday for the shop to open?
First time in my life I have seen a network interface with no possibility to do anything except guess.
Tom


Re: Mountains and Dragons - IC1805

Luca Marinelli
 

That’s a beautiful image. Ha luminance worked a treat to tame down the noisy channels.

Did you use both telescopes to collect this data or only one?

Luca

On Jan 29, 2021, at 8:02 PM, Pete Mumbower via groups.io <pmumbower@...> wrote:

Wow that is a superb image, thin clouds or not. Well done. That Mach2 isn't sweating with that load!

Pete


Re: Find my CP4!!! How annoying!

Luca Marinelli
 

Tom,

Sometimes router have a hard time showing new Ethernet clients. A utility that can help in this task is Advanced IP Scanner. It will give all the clients on the network served by the router and if the CP4 is on it, it will find it.

Is using a USB cable out of the question?

Cheers,

Luca


Re: Mountains and Dragons - IC1805

Pete Mumbower
 

Wow that is a superb image, thin clouds or not. Well done. That Mach2 isn't sweating with that load!

Pete


Re: Mountains and Dragons - IC1805

Roland Christen
 

Thanks.

Rolando



-----Original Message-----
From: Steve Reilly <sreilly24590@...>
To: main@ap-gto.groups.io
Sent: Fri, Jan 29, 2021 6:58 pm
Subject: Re: [ap-gto] Mountains and Dragons - IC1805

Vert sweet image Roland.
 
-Steve
 
 
From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Roland Christen via groups.io
Sent: Friday, January 29, 2021 7:52 PM
To: main@ap-gto.groups.io; main@ap-ug.groups.io
Subject: [ap-gto] Mountains and Dragons - IC1805
 
Hello Astronuts,
 
Finally got around to processing the heart of the Heart nebula, IC 1805. This was a difficult image for me because of continual thin clouds that prevented getting some of the fainter narrowband data. I managed to shoot 10.5 hours of H-a but only 3.5 hours of OIII and 5.5 hours of SII. The latter two took a lot of noise reduction to bring in. Fortunately the main detail is in H-a, so I used that for a small amount of Luminance. Most of the frames were imaged unguided, the other half was guided.
 
 
160EDF with 155 EDF piggyback on the Mach2 mount, QSI 683WSG camera, Lodestar guide camera.
 
Rolando
 
 

--
Roland Christen
Astro-Physics

--
Roland Christen
Astro-Physics

7221 - 7240 of 83105