Date   

OT Groups.io Un-Read Subject Font Color

jimmyjujames
 

Hello Karen
 
I use Chrome as my web browser these days
 
The default groups.io un-read subject font color is a light-blue
The read subject font color changes to black.
 
My old eyes do not easily differentiate light-blue from black at the small default font size.
 
My work-around is to increase font size to 150% with Control-plus.
 
I've looked in groups.io-Subscription and Chrome-Settings for color preferences.
Hopefully I missed it somewhere but,
 
Increasing font size to 150% with Control-plus is not a problem.
Groups.io remembers my last font size change so I only need to increase font size (Control-Plus) to 150% once.
 
Thanks
Jimmy
33.6N,88.6W
6 sentences (63 words) follow.
The amount and intensity of sunlight a human receives determines their skin pigment.
The closer to the equator the darker your skin pigment.
The further away from the equator the lighter your skin pigment.
The color of your skin tells where your ancestors lived on Earth 20,000 years ago.
It's just a skin pigment nothing deeper.
Wisdom comes to those who seek it.
 


Re: Keypad updating

George
 

Steve,

 

Contact me.  

 

Regards,

 

George

 

George Whitney

Astro-Physics, Inc.

Phone:  815-222-6538 (direct line)

Phone:  815-282-1513 (office)

Email:  george@...

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of steve711614 via groups.io
Sent: Thursday, January 21, 2021 7:35 AM
To: main@ap-gto.groups.io
Subject: [ap-gto] Keypad updating

 

Hello I have had my (new to me ) mach1 for 24 hours and it looks like the keypad software version 17.6 I think  is a long way out of date i found a update site but its asking for a user name and password and just wondering how i get these 
Steve


Re: Keypad updating

Geert
 

Contact Astrophysics directly to give the Mach1 and keypad serial number, they will give you the info.

 

Geert Vdbulcke

Belgium.

 

Van: main@ap-gto.groups.io <main@ap-gto.groups.io> Namens steve711614 via groups.io
Verzonden: donderdag 21 januari 2021 13:35
Aan: main@ap-gto.groups.io
Onderwerp: [ap-gto] Keypad updating

 

Hello I have had my (new to me ) mach1 for 24 hours and it looks like the keypad software version 17.6 I think  is a long way out of date i found a update site but its asking for a user name and password and just wondering how i get these 
Steve


This email has been scanned by BullGuard antivirus protection.
For more info visit www.bullguard.com


Re: Keypad updating

Wes Atchison
 

HI Steve,

Last March, I like you obtained a new to me AP900 and was asking similar questions.  Frist step I did was to register my ownership of the mount using form on this link:
Support (astro-physics.com) 

I then contacted AP using this link:  Astro-Physics Contact Us (astro-physics.com) 

The Folks at AP are very helpful and are amazing at providing support even for out of production product. 

Hope this is helpful and enjoy your mount.

Wes
WA5TKU 


Mach2 tracking below custom horizon

Luca Marinelli
 

Hello,

I had just finished a APPM run last night and noticed that the Mach2 was still tracking after it had dipped below the Western horizon. I think I had APPC configured correctly and I was surprised that tracking wasn't stopped. Is there anything else I should set for tracking to stop when the mount reaches the horizon?

Thanks,

Luca


Keypad updating

steve711614
 

Hello I have had my (new to me ) mach1 for 24 hours and it looks like the keypad software version 17.6 I think  is a long way out of date i found a update site but its asking for a user name and password and just wondering how i get these 
Steve


Re: Pier Crash - need help diagnosing #ASCOM_V2_Driver

Joel Short
 

I remotely updated things and I'll do that check later today when I'm out in the OBS.  But I was a bit reluctant to do anything until I had a confirmation that I did things right.  :)
joel


Re: Pier Crash - need help diagnosing #ASCOM_V2_Driver

Eric M
 

It worked for me. Just manually slew to 5 degrees past meridian and see for yourself. 


Re: Pier Crash - need help diagnosing #ASCOM_V2_Driver

Joel Short
 

On Mon, Oct 26, 2020 at 01:43 PM, Roland Christen wrote:
For those who want to try setting a limit, here are the commands:

:LR0#  turns off limits
:LR2#  turns on limits at 5 degrees past meridian, bounces back 6 degrees and parks the mount (motors de-energized).
I'm finally getting around to updating the CP4 to firmware AP-CP4-vcpx-p02-08.  I used the USB utility and all went well.
I would like to turn on the limit at 5 degrees past meridian.  In the Terminal tab of the USB utility I typed in    :LR2#    and hit send.  The only response I got back was "1".  Did it upload correctly?
joel


Re: Galaxy group in Eridanus

Robert Chozick
 

Fantastic image. 


On Jan 19, 2021, at 9:39 PM, Geoff Smith <ghsmith45@...> wrote:

This is a nice little group which, rather surprisingly, is not often imaged. While the galaxies are not big, they still reveal some detail.
Technical information here https://www.astrobin.com/ktv8f5/?nc=user

Larger res here https://www.astrobin.com/full/ktv8f5/0/

Geoff


Re: High RMS values with PHD2

Peter Bresler
 
Edited

I did not check the internal mount cables....will do. Things were pretty much all right last night.


Re: High RMS values with PHD2

Peter Bresler
 
Edited

Did no know I did that! Navigating all these forums can be difficult. Its not always that easy to post a message.

Here is the link from last night. There was one episode again when the mount went awry. I also was not able to calibrate with the OAG at native focal length on the Planewave, but that is another issue. I wound up using a guide scope

https://openphdguiding.org/logs/dl/PHD2_logs_Ryge.zip


Re: Galaxy group in Eridanus

Emilio J. Robau, P.E.
 

Geoff,

That is really a beauty and the target is now on my hit parade.  As soon as the moon gets out of the way, it will be my early evening target.  You did a wonderful job, and thanks for bringing it to my attention.  Dr. Henning: Go Gators!  1984 BSCE.


Re: Galaxy group in Eridanus

Richard Hennig
 

Dear Geoff,

That’s a beautiful galaxy group. I love the details in your picture. I wonder if one can visually detect more than the two bright galaxies.

Best wishes,
Richard

— 
Richard G. Hennig
Professor and Alumni Professor of Materials Science and Engineering
Associate Director, Quantum Theory Project
Department of Materials Science and Engineering, University of Florida
Email: rhennig@...
Web: http://hennig.mse.ufl.edu

On Jan 19, 2021, at 10:39 PM, Geoff Smith <ghsmith45@...> wrote:

This is a nice little group which, rather surprisingly, is not often imaged. While the galaxies are not big, they still reveal some detail.
Technical information here https://www.astrobin.com/ktv8f5/?nc=user

Larger res here https://www.astrobin.com/full/ktv8f5/0/

Geoff



Re: High RMS values with PHD2

 

Hi Peter

It looks to me like maybe your mount was slipping in alt? there appeared to be substantial polar misalignment in your setup

looking at your "before runs" that were working, you can see most of the corrections are in one direction ie polar alignment is off:
pier side east
image.png
pier side west
image.png
then your guidestar degraded and was lost

Also during your many attempts at calibration, DEC did not appear to be responsive, maybe a bad cable there?

even after a successful recalibration, your PA looked still substantially off. in the second guidelog things seemed better

you might do a guiding assistant run after your calibration and measure polar alignment, as well as get other recommendations for your guiding settings? you only need 2-3 minutes for that.


Brian

On Tue, Jan 19, 2021 at 10:25 AM Peter Bresler via groups.io <PABresler=aol.com@groups.io> wrote:
https://openphdguiding.org/logs/dl/PHD2_logs_wkhU.zip

Here is the link for the log. I see you also post on PHD. To tell you the truth, I had to mark notifications from that forum as spam, because they were coming through constantly, and I was unable to reset the notification. 

In any case somehow I got things back to normal last night, but I am not sure what caused the problem, and what fixed it.



--
Brian 



Brian Valente


Re: Bad initial guiding on my AP600e

Worsel
 

Tom


I do not know about the 600, but A-P recommends a separate power supply for their recent mounts.

Bryan


Galaxy group in Eridanus

Geoff Smith
 

This is a nice little group which, rather surprisingly, is not often imaged. While the galaxies are not big, they still reveal some detail.
Technical information here https://www.astrobin.com/ktv8f5/?nc=user

Larger res here https://www.astrobin.com/full/ktv8f5/0/

Geoff


Re: Bad initial guiding on my AP600e

Tom Blahovici
 

I guess it doesn't help that the temperature was at -10C.  Seems to get worse as the temperature goes lower. Last night it was only one exposure where I had this issue.  Last week, when the temperature was -15 I had quite a few more.
Is it possible the power supply contributed?  I have a powerwerx 30 amp switching supply but I power the whole imaging setup with it.  This includes a ASI6200, ASI290, Moonlight Nitecrawler and a dew heater.
Tom


Groups.io Management (was: RE: [ap-gto] High RMS values with PHD2)

Karen Christen
 

Hey Astro-Nuts,

 

Please don’t hesitate to reach out to me directly if you have any questions or trouble with your AP forums on Groups.io.  I realize Peter is talking about another group below, but I’m happy to help anyone who might be frustrated.  There are methods to set up your account to suit your needs and preferences.  My email is: karen at astro-physics dot com. 

 

Clear skies!

Karen

AP

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Christopher Erickson
Sent: Tuesday, January 19, 2021 12:32 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] High RMS values with PHD2

 

NEVER mark messages from Groups.io as SPAM. That creates massive headaches for many other users, for many group moderators and also for Groups.io in general.

 

MUCH better to seek Groups.io customer support if you can't figure out how to modify your notifications settings.


"My advice is always free and worth every penny!"

 

-Christopher Erickson

Observatory Engineer

Summit Kinetics

Waikoloa, Hawaii

 

 

On Tue, Jan 19, 2021 at 8:25 AM Peter Bresler via groups.io <PABresler=aol.com@groups.io> wrote:

https://openphdguiding.org/logs/dl/PHD2_logs_wkhU.zip

Here is the link for the log. I see you also post on PHD. To tell you the truth, I had to mark notifications from that forum as spam, because they were coming through constantly, and I was unable to reset the notification. 

In any case somehow I got things back to normal last night, but I am not sure what caused the problem, and what fixed it.


--
Karen Christen
Astro-Physics


Re: High RMS values with PHD2

Christopher Erickson
 

NEVER mark messages from Groups.io as SPAM. That creates massive headaches for many other users, for many group moderators and also for Groups.io in general.

MUCH better to seek Groups.io customer support if you can't figure out how to modify your notifications settings.

"My advice is always free and worth every penny!"

-Christopher Erickson
Observatory Engineer
Summit Kinetics
Waikoloa, Hawaii


On Tue, Jan 19, 2021 at 8:25 AM Peter Bresler via groups.io <PABresler=aol.com@groups.io> wrote:
https://openphdguiding.org/logs/dl/PHD2_logs_wkhU.zip

Here is the link for the log. I see you also post on PHD. To tell you the truth, I had to mark notifications from that forum as spam, because they were coming through constantly, and I was unable to reset the notification. 

In any case somehow I got things back to normal last night, but I am not sure what caused the problem, and what fixed it.

6661 - 6680 of 82387