Date   

Re: [ap-ug] Pillars of M16

Pete Lardizabal
 

Roland,

Wonderful image given great conditions... Extraordinary under those!!! Inspiring work. 

😎

Pete

On Aug 27, 2020, at 2:17 PM, Roland Christen via groups.io <chris1011@...> wrote:


Hi Astronuts,

The recent M16 image that Ignacio posted presented me with a challenge to see what could be achieved here in Northern Illinois, using a 160EDF refractor. Challenge indeed it was. The object is only about 30 degrees above the horizon, directly over a huge mall and auto dealer complex, the Moon was quite nearby. Seeing down near the horizon is quite iffy in the best of nights. Plus, we still have smoke in the skies from out west. temperature was in the mid-80's so my camera would not cool down to below about -15C.

Even though i was shooting thru a narrowband H-a filter, I didn't know what to expect. On top of that I decided to go for broke and do 1 hour subs, two of them were combined in the images I just posted:

https://www.astrobin.com/full/7bqswe/0/
Full Res:
https://www.astrobin.com/full/7bqswe/0/?real=&mod=

While you may think this was insane, before you open the links, take a look at my sky conditions in the photo below:

<dummyfile.0.part>



Re: [ap-ug] Pillars of M16

Roland Christen
 

Yes, a 5nm Astrodon. I swear by them. Never had any halos or reflections with that filter.

Maybe next session I will gather 3nm OIII data in 2 hour exposure. Main problem with long exposures is that the entire image can be ruined with one airplane trail.

Rolando



-----Original Message-----
From: Brian Valente <bvalente@...>
To: main@ap-gto.groups.io
Sent: Thu, Aug 27, 2020 1:27 pm
Subject: Re: [ap-gto] [ap-ug] Pillars of M16

pretty amazing

is this with your 5nm Ha filter? maybe go for broke and do 2 hr exposures on the 3nm ;)

On Thu, Aug 27, 2020 at 11:19 AM uncarollo2 <chris1011@...> via groups.io <chris1011=aol.com@groups.io> wrote:

Wow!!!
You like my sky pollution in the pix below? Nice eh?

Rolando


-----Original Message-----
From: thefamily90 Phillips <thefamily90@...>
To: main@ap-ug.groups.io <main@ap-ug.groups.io>; main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Thu, Aug 27, 2020 1:18 pm
Subject: Re: [ap-ug] Pillars of M16

Wow!!!


From: main@ap-ug.groups.io <main@ap-ug.groups.io> on behalf of Roland Christen via groups.io <chris1011=aol.com@groups.io>
Sent: Thursday, August 27, 2020 2:16:33 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>; main@ap-ug.groups.io <main@ap-ug.groups.io>
Subject: [ap-ug] Pillars of M16
 
Hi Astronuts,

The recent M16 image that Ignacio posted presented me with a challenge to see what could be achieved here in Northern Illinois, using a 160EDF refractor. Challenge indeed it was. The object is only about 30 degrees above the horizon, directly over a huge mall and auto dealer complex, the Moon was quite nearby. Seeing down near the horizon is quite iffy in the best of nights. Plus, we still have smoke in the skies from out west. temperature was in the mid-80's so my camera would not cool down to below about -15C.

Even though i was shooting thru a narrowband H-a filter, I didn't know what to expect. On top of that I decided to go for broke and do 1 hour subs, two of them were combined in the images I just posted:

Full Res:

While you may think this was insane, before you open the links, take a look at my sky conditions in the photo below:




--
Jim Phillips


--
Brian 



Brian Valente


Re: [ap-ug] Pillars of M16

 

pretty amazing

is this with your 5nm Ha filter? maybe go for broke and do 2 hr exposures on the 3nm ;)

On Thu, Aug 27, 2020 at 11:19 AM uncarollo2 <chris1011@...> via groups.io <chris1011=aol.com@groups.io> wrote:

Wow!!!
You like my sky pollution in the pix below? Nice eh?

Rolando


-----Original Message-----
From: thefamily90 Phillips <thefamily90@...>
To: main@ap-ug.groups.io <main@ap-ug.groups.io>; main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Thu, Aug 27, 2020 1:18 pm
Subject: Re: [ap-ug] Pillars of M16

Wow!!!


From: main@ap-ug.groups.io <main@ap-ug.groups.io> on behalf of Roland Christen via groups.io <chris1011=aol.com@groups.io>
Sent: Thursday, August 27, 2020 2:16:33 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>; main@ap-ug.groups.io <main@ap-ug.groups.io>
Subject: [ap-ug] Pillars of M16
 
Hi Astronuts,

The recent M16 image that Ignacio posted presented me with a challenge to see what could be achieved here in Northern Illinois, using a 160EDF refractor. Challenge indeed it was. The object is only about 30 degrees above the horizon, directly over a huge mall and auto dealer complex, the Moon was quite nearby. Seeing down near the horizon is quite iffy in the best of nights. Plus, we still have smoke in the skies from out west. temperature was in the mid-80's so my camera would not cool down to below about -15C.

Even though i was shooting thru a narrowband H-a filter, I didn't know what to expect. On top of that I decided to go for broke and do 1 hour subs, two of them were combined in the images I just posted:

Full Res:

While you may think this was insane, before you open the links, take a look at my sky conditions in the photo below:




--
Jim Phillips



--
Brian 



Brian Valente


Re: [ap-ug] Pillars of M16

Roland Christen
 


Wow!!!
You like my sky pollution in the pix below? Nice eh?

Rolando


-----Original Message-----
From: thefamily90 Phillips <thefamily90@...>
To: main@ap-ug.groups.io <main@ap-ug.groups.io>; main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Thu, Aug 27, 2020 1:18 pm
Subject: Re: [ap-ug] Pillars of M16

Wow!!!


From: main@ap-ug.groups.io <main@ap-ug.groups.io> on behalf of Roland Christen via groups.io <chris1011@...>
Sent: Thursday, August 27, 2020 2:16:33 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>; main@ap-ug.groups.io <main@ap-ug.groups.io>
Subject: [ap-ug] Pillars of M16
 
Hi Astronuts,

The recent M16 image that Ignacio posted presented me with a challenge to see what could be achieved here in Northern Illinois, using a 160EDF refractor. Challenge indeed it was. The object is only about 30 degrees above the horizon, directly over a huge mall and auto dealer complex, the Moon was quite nearby. Seeing down near the horizon is quite iffy in the best of nights. Plus, we still have smoke in the skies from out west. temperature was in the mid-80's so my camera would not cool down to below about -15C.

Even though i was shooting thru a narrowband H-a filter, I didn't know what to expect. On top of that I decided to go for broke and do 1 hour subs, two of them were combined in the images I just posted:

https://www.astrobin.com/full/7bqswe/0/
Full Res:
https://www.astrobin.com/full/7bqswe/0/?real=&mod=

While you may think this was insane, before you open the links, take a look at my sky conditions in the photo below:




--
Jim Phillips


Re: [ap-ug] Pillars of M16

thefamily90 Phillips
 

Wow!!!


From: main@ap-ug.groups.io <main@ap-ug.groups.io> on behalf of Roland Christen via groups.io <chris1011@...>
Sent: Thursday, August 27, 2020 2:16:33 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>; main@ap-ug.groups.io <main@ap-ug.groups.io>
Subject: [ap-ug] Pillars of M16
 
Hi Astronuts,

The recent M16 image that Ignacio posted presented me with a challenge to see what could be achieved here in Northern Illinois, using a 160EDF refractor. Challenge indeed it was. The object is only about 30 degrees above the horizon, directly over a huge mall and auto dealer complex, the Moon was quite nearby. Seeing down near the horizon is quite iffy in the best of nights. Plus, we still have smoke in the skies from out west. temperature was in the mid-80's so my camera would not cool down to below about -15C.

Even though i was shooting thru a narrowband H-a filter, I didn't know what to expect. On top of that I decided to go for broke and do 1 hour subs, two of them were combined in the images I just posted:

https://www.astrobin.com/full/7bqswe/0/
Full Res:
https://www.astrobin.com/full/7bqswe/0/?real=&mod=

While you may think this was insane, before you open the links, take a look at my sky conditions in the photo below:




Pillars of M16

Roland Christen
 

Hi Astronuts,

The recent M16 image that Ignacio posted presented me with a challenge to see what could be achieved here in Northern Illinois, using a 160EDF refractor. Challenge indeed it was. The object is only about 30 degrees above the horizon, directly over a huge mall and auto dealer complex, the Moon was quite nearby. Seeing down near the horizon is quite iffy in the best of nights. Plus, we still have smoke in the skies from out west. temperature was in the mid-80's so my camera would not cool down to below about -15C.

Even though i was shooting thru a narrowband H-a filter, I didn't know what to expect. On top of that I decided to go for broke and do 1 hour subs, two of them were combined in the images I just posted:

https://www.astrobin.com/full/7bqswe/0/
Full Res:
https://www.astrobin.com/full/7bqswe/0/?real=&mod=

While you may think this was insane, before you open the links, take a look at my sky conditions in the photo below:




Re: APCC-Pro manual temperature/pressure entry question

Bob Benamati
 

Thanks,  Ekhard/Ray,

Well, that didn't work, but I found the problem. Big DUH moment....

Enable environmental polling was UNchecked in the Environmental Settings. Guess somewhere along the line that got unchecked since I don't have a device (yet!).

Thanks for the input, guys!
Bob

Sent via Verizon Wireless

On Aug 27, 2020 12:45, "eckhard.voelcker via groups.io" <eckhard.voelcker@...> wrote:
Ray,

when I had no ASCOM OC device installed, I looked for a way to manually adjust the temperature. I saw the very screen that Bob attached to his post. The temperature input/display control was not visible as in the screenshot. Clicking on the screen where the control is supposed to be located makes the control visible and accept input.

Regards
Eckhard


Re: APCC-Pro manual temperature/pressure entry question

eckhard.voelcker@...
 

Ray,

when I had no ASCOM OC device installed, I looked for a way to manually adjust the temperature. I saw the very screen that Bob attached to his post. The temperature input/display control was not visible as in the screenshot. Clicking on the screen where the control is supposed to be located makes the control visible and accept input.

Regards
Eckhard


Re: [ap-ug] New product for Stowaway that we are going to make

Roland Christen
 

No wait lists!
We'll sell 'em when we get them machined and put together.

Rolando


-----Original Message-----
From: Pete Lardizabal <p14@...>
To: main@ap-ug.groups.io
Cc: main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Wed, Aug 26, 2020 5:34 pm
Subject: Re: [ap-gto] [ap-ug] New product for Stowaway that we are going to make


Can you put me on the wait list please. 

😉

Pete

On Aug 26, 2020, at 6:15 PM, Roland Christen via groups.io <chris1011@...> wrote:


Our chief design engineer came up with this nice dovetail accessory that fits on top of the 92 Stowaway rings. It also fits on the 130 scopes if you use the 7" sliding bar.

Rolando

<dummyfile.0.part>


<dummyfile.1.part>


Re: [ap-ug] Pelican images

Richard Crisp
 

The seeing is good oftentimes in the bay area

Mine was from castro valley

-----Original Message-----
From: main@ap-ug.groups.io <main@ap-ug.groups.io> On Behalf Of Benoit Schillings
Sent: Wednesday, August 26, 2020 3:14 PM
To: main@ap-gto.groups.io
Cc: main@ap-ug.groups.io
Subject: Re: [ap-gto] [ap-ug] Pelican images

that one was actually from Palo Alto Richard.

-- benoit

On Wed, Aug 26, 2020 at 2:20 PM Richard Crisp <rdcrisp@sbcglobal.net> wrote:

Your Snake/Fish came out nicely resolved. Was that taken at Barcroft?

“Corrected” by my iPhone

On Aug 26, 2020, at 1:48 PM, Benoit Schillings <benoit.schillings@gmail.com> wrote:

sweet. I imaged it 15 years ago (prehistoric ccd imaging),
http://www.astrosurf.com/benoit/elephant.htm

Would be interesting to see if there are any changes visible.

-- benoit

On Wed, Aug 26, 2020 at 1:15 PM uncarollo2 <chris1011@aol.com> via
groups.io <chris1011=aol.com@groups.io> wrote:


always reminded me of a snake that just nabbed a fish

Never saw it that way, but indeed you are right. I always saw it as a long arm with a hammer on the end.

Rolando


-----Original Message-----
From: Richard Crisp <rdcrisp@sbcglobal.net>
To: main@ap-ug.groups.io
Cc: main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Wed, Aug 26, 2020 2:25 pm
Subject: Re: [ap-ug] Pelican images

Very nice!

That HHH555 “tornado forming”, if rotated 180 degrees, always
reminded me of a snake that just nabbed a fish

The stars at the head end of the captured fish: the poor thing’s oeyeballs bulging out!

http://www.narrowbandimaging.com/images/hh555__mnk1sn2_cm10_geg_cs_
s2hao3_10hrs_xga.jpg

18” cass @ f/7.7 and KAF3200ME



“Corrected” by my iPhone

On Aug 26, 2020, at 11:44 AM, Roland Christen via groups.io <chris1011=aol.com@groups.io> wrote:


hello Astronuts,

I did some imaging of the Pelican in extremely poor transparency over the last couple of nights. The seeing was exceptional the first night and very good the next two. transparency was so poor due to fires in Colorado that I could only see a couple of stars and Jupiter. The Moon was blood red. Thank goodness for deep red H-a filters which seem to cut thru the haze.

The first image is the entire Pelican region. The second is a crop of the active region which I will call the "Tornado Forming". It reminds me of our Midwest spring tornadoes which come dancing out of dark clouds and cause much damage when the touch down. We had a number of them this spring, fortunately they all missed our place.


https://www.astrobin.com/full/iuby4z/0/

https://www.astrobin.com/full/pkkm0d/0/?nc=user

Rolando





Re: [ap-ug] New product for Stowaway that we are going to make

Pete Lardizabal
 


Can you put me on the wait list please. 

😉

Pete

On Aug 26, 2020, at 6:15 PM, Roland Christen via groups.io <chris1011@...> wrote:


Our chief design engineer came up with this nice dovetail accessory that fits on top of the 92 Stowaway rings. It also fits on the 130 scopes if you use the 7" sliding bar.

Rolando

<dummyfile.0.part>


<dummyfile.1.part>


Re: Pelican images

Karen Christen
 

Stay safe, Kevin!

Karen

AP

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of khursh via groups.io
Sent: Wednesday, August 26, 2020 5:15 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Pelican images

 

I have one of those fires 8 miles to my west and another bigger one 20 miles to my east. My 900GTO and scope are under wraps as a result.


--
Karen Christen
Astro-Physics


Better picture of the plate (Re: [ap-ug] New product for Stowaway that we are going to make)

Roland Christen
 



-----Original Message-----
From: Roland Christen via groups.io <chris1011@...>
To: main@ap-gto.groups.io <main@ap-gto.groups.io>; main@ap-ug.groups.io <main@ap-ug.groups.io>
Sent: Wed, Aug 26, 2020 5:14 pm
Subject: [ap-ug] New product for Stowaway that we are going to make

Our chief design engineer came up with this nice dovetail accessory that fits on top of the 92 Stowaway rings. It also fits on the 130 scopes if you use the 7" sliding bar.

Rolando


Re: Pelican images

KHursh
 

I have one of those fires 8 miles to my west and another bigger one 20 miles to my east. My 900GTO and scope are under wraps as a result.


New product for Stowaway that we are going to make

Roland Christen
 

Our chief design engineer came up with this nice dovetail accessory that fits on top of the 92 Stowaway rings. It also fits on the 130 scopes if you use the 7" sliding bar.

Rolando




Re: [ap-ug] Pelican images

Benoit Schillings
 

that one was actually from Palo Alto Richard.

-- benoit

On Wed, Aug 26, 2020 at 2:20 PM Richard Crisp <rdcrisp@sbcglobal.net> wrote:

Your Snake/Fish came out nicely resolved. Was that taken at Barcroft?

“Corrected” by my iPhone

On Aug 26, 2020, at 1:48 PM, Benoit Schillings <benoit.schillings@gmail.com> wrote:

sweet. I imaged it 15 years ago (prehistoric ccd imaging),
http://www.astrosurf.com/benoit/elephant.htm

Would be interesting to see if there are any changes visible.

-- benoit

On Wed, Aug 26, 2020 at 1:15 PM uncarollo2 <chris1011@aol.com> via
groups.io <chris1011=aol.com@groups.io> wrote:


always reminded me of a snake that just nabbed a fish

Never saw it that way, but indeed you are right. I always saw it as a long arm with a hammer on the end.

Rolando


-----Original Message-----
From: Richard Crisp <rdcrisp@sbcglobal.net>
To: main@ap-ug.groups.io
Cc: main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Wed, Aug 26, 2020 2:25 pm
Subject: Re: [ap-ug] Pelican images

Very nice!

That HHH555 “tornado forming”, if rotated 180 degrees, always reminded me of a snake that just nabbed a fish

The stars at the head end of the captured fish: the poor thing’s oeyeballs bulging out!

http://www.narrowbandimaging.com/images/hh555__mnk1sn2_cm10_geg_cs_s2hao3_10hrs_xga.jpg

18” cass @ f/7.7 and KAF3200ME



“Corrected” by my iPhone

On Aug 26, 2020, at 11:44 AM, Roland Christen via groups.io <chris1011=aol.com@groups.io> wrote:


hello Astronuts,

I did some imaging of the Pelican in extremely poor transparency over the last couple of nights. The seeing was exceptional the first night and very good the next two. transparency was so poor due to fires in Colorado that I could only see a couple of stars and Jupiter. The Moon was blood red. Thank goodness for deep red H-a filters which seem to cut thru the haze.

The first image is the entire Pelican region. The second is a crop of the active region which I will call the "Tornado Forming". It reminds me of our Midwest spring tornadoes which come dancing out of dark clouds and cause much damage when the touch down. We had a number of them this spring, fortunately they all missed our place.


https://www.astrobin.com/full/iuby4z/0/

https://www.astrobin.com/full/pkkm0d/0/?nc=user

Rolando





Re: Pelican images

Roland Christen
 

That definitely looks like a volcano.

Rolando



-----Original Message-----
From: Mike Dodd <mike@...>
To: main@ap-gto.groups.io
Sent: Wed, Aug 26, 2020 4:35 pm
Subject: Re: [ap-gto] Pelican images

On 8/26/2020 4:14 PM, uncarollo2 <chris1011@...> via groups.io wrote:

>> always reminded me of a snake that just nabbed a fish
>
> Never saw it that way, but indeed you are right. I always saw it as a
> long arm with a hammer on the end.

Back in 2005 I could image only a small portion of the Pelican. I
rotated the "snake" area, and it became a "volcano" to my eyes. I even
colored the Ha image orange in a bit of artistic whimsy:
<http://astronomy.mdodd.com/nebulae-05.html>

"What you see is what you see." :-)

--- Mike






Re: Pelican images

Mike Dodd
 

On 8/26/2020 4:14 PM, uncarollo2 <chris1011@aol.com> via groups.io wrote:

always reminded me of a snake that just nabbed a fish
Never saw it that way, but indeed you are right. I always saw it as a
long arm with a hammer on the end.
Back in 2005 I could image only a small portion of the Pelican. I rotated the "snake" area, and it became a "volcano" to my eyes. I even colored the Ha image orange in a bit of artistic whimsy: <http://astronomy.mdodd.com/nebulae-05.html>

"What you see is what you see." :-)

--- Mike


Re: [ap-ug] Pelican images

Richard Crisp
 

Your Snake/Fish came out nicely resolved. Was that taken at Barcroft?

“Corrected” by my iPhone

On Aug 26, 2020, at 1:48 PM, Benoit Schillings <benoit.schillings@gmail.com> wrote:

sweet. I imaged it 15 years ago (prehistoric ccd imaging),
http://www.astrosurf.com/benoit/elephant.htm

Would be interesting to see if there are any changes visible.

-- benoit

On Wed, Aug 26, 2020 at 1:15 PM uncarollo2 <chris1011@aol.com> via
groups.io <chris1011=aol.com@groups.io> wrote:


always reminded me of a snake that just nabbed a fish

Never saw it that way, but indeed you are right. I always saw it as a long arm with a hammer on the end.

Rolando


-----Original Message-----
From: Richard Crisp <rdcrisp@sbcglobal.net>
To: main@ap-ug.groups.io
Cc: main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Wed, Aug 26, 2020 2:25 pm
Subject: Re: [ap-ug] Pelican images

Very nice!

That HHH555 “tornado forming”, if rotated 180 degrees, always reminded me of a snake that just nabbed a fish

The stars at the head end of the captured fish: the poor thing’s oeyeballs bulging out!

http://www.narrowbandimaging.com/images/hh555__mnk1sn2_cm10_geg_cs_s2hao3_10hrs_xga.jpg

18” cass @ f/7.7 and KAF3200ME



“Corrected” by my iPhone

On Aug 26, 2020, at 11:44 AM, Roland Christen via groups.io <chris1011=aol.com@groups.io> wrote:


hello Astronuts,

I did some imaging of the Pelican in extremely poor transparency over the last couple of nights. The seeing was exceptional the first night and very good the next two. transparency was so poor due to fires in Colorado that I could only see a couple of stars and Jupiter. The Moon was blood red. Thank goodness for deep red H-a filters which seem to cut thru the haze.

The first image is the entire Pelican region. The second is a crop of the active region which I will call the "Tornado Forming". It reminds me of our Midwest spring tornadoes which come dancing out of dark clouds and cause much damage when the touch down. We had a number of them this spring, fortunately they all missed our place.


https://www.astrobin.com/full/iuby4z/0/

https://www.astrobin.com/full/pkkm0d/0/?nc=user

Rolando



Re: [ap-ug] Pelican images

Richard Crisp
 

The date on mine is 2006

“Corrected” by my iPhone

On Aug 26, 2020, at 1:34 PM, chris1011@... wrote:



Would be interesting to see if there are any changes visible.
I did a quick blink between you image and mine and could not see anything obvious.

Rolando


-----Original Message-----
From: Benoit Schillings <benoit.schillings@...>
To: main@ap-gto.groups.io
Cc: rdcrisp@... <rdcrisp@...>; main@ap-ug.groups.io <main@ap-ug.groups.io>
Sent: Wed, Aug 26, 2020 3:19 pm
Subject: Re: [ap-gto] [ap-ug] Pelican images

sweet. I imaged it 15 years ago (prehistoric ccd imaging),
http://www.astrosurf.com/benoit/elephant.htm

Would be interesting to see if there are any changes visible.

-- benoit

On Wed, Aug 26, 2020 at 1:15 PM uncarollo2 <chris1011@...> via
groups.io <chris1011=aol.com@groups.io> wrote:
>
>
> always reminded me of a snake that just nabbed a fish
>
> Never saw it that way, but indeed you are right. I always saw it as a long arm with a hammer on the end.
>
> Rolando
>
>
> -----Original Message-----
> From: Richard Crisp <rdcrisp@...>
> To: main@ap-ug.groups.io
> Cc: main@ap-gto.groups.io <main@ap-gto.groups.io>
> Sent: Wed, Aug 26, 2020 2:25 pm
> Subject: Re: [ap-ug] Pelican images
>
> Very nice!
>
> That HHH555 “tornado forming”, if rotated 180 degrees, always reminded me of a snake that just nabbed a fish
>
> The stars at the head end of the captured fish: the poor thing’s oeyeballs bulging out!
>
> http://www.narrowbandimaging.com/images/hh555__mnk1sn2_cm10_geg_cs_s2hao3_10hrs_xga.jpg
>
> 18” cass @ f/7.7 and KAF3200ME
>
>
>
> “Corrected” by my iPhone
>
> On Aug 26, 2020, at 11:44 AM, Roland Christen via groups.io <chris1011=aol.com@groups.io> wrote:
>
> 
> hello Astronuts,
>
> I did some imaging of the Pelican in extremely poor transparency over the last couple of nights. The seeing was exceptional the first night and very good the next two. transparency was so poor due to fires in Colorado that I could only see a couple of stars and Jupiter. The Moon was blood red. Thank goodness for deep red H-a filters which seem to cut thru the haze.
>
> The first image is the entire Pelican region. The second is a crop of the active region which I will call the "Tornado Forming". It reminds me of our Midwest spring tornadoes which come dancing out of dark clouds and cause much damage when the touch down. We had a number of them this spring, fortunately they all missed our place.
>
>
> https://www.astrobin.com/full/iuby4z/0/
>
> https://www.astrobin.com/full/pkkm0d/0/?nc=user
>
> Rolando
>
>


6381 - 6400 of 79126