Date   

Re: Keypad Error #Keypad

Dean Jacobsen
 

On Tue, Jun 2, 2020 at 09:39 AM, uncarollo2 <chris1011@...> wrote:
Keep the keypad powered as you change the battery.
Too late.  :-)  Not a big deal for me to re-load the database.  I assume it is corrupted.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Keypad Error #Keypad

Roland Christen
 

Keep the keypad powered as you change the battery.

Roland



-----Original Message-----
From: Dean Jacobsen <deanjacobsen@...>
To: main@ap-gto.groups.io
Sent: Tue, Jun 2, 2020 11:36 am
Subject: Re: [ap-gto] Keypad Error #Keypad

On Tue, Jun 2, 2020 at 06:00 AM, George wrote:
You may be experiencing some oxidation issues also. 
Yes, that was the problem.  Cleaned the blue board connector and pins with Deoxit and it boots right up.  Now to change the battery while I have the keypad open.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Keypad Error #Keypad

Dean Jacobsen
 

On Tue, Jun 2, 2020 at 06:00 AM, George wrote:
You may be experiencing some oxidation issues also. 
Yes, that was the problem.  Cleaned the blue board connector and pins with Deoxit and it boots right up.  Now to change the battery while I have the keypad open.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Keypad Error #Keypad

George
 

Michael,

 

Chris Erickson has spoken of it with great praise.   I have no experience with it and cannot speak to it.

 

Regards,

 

George

 

George Whitney

Astro-Physics, Inc.

Phone:  815-282-1513

Email:  george@...

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Michael Hambrick via groups.io
Sent: Tuesday, June 02, 2020 9:48 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Keypad Error #Keypad

 

Hi George

Would you recommend using a dielectric grease on these connections to minimize / prevent corrosion ?

I have never seen any corrosion on my keypad or mount cables, but I have seen some corrosion on the USB cables that plug into my cameras.


Best Regards

Michael Hambrick
ARLANXEO

TSR Global Manufacturing Support
PO Box 2000
Orange, TX 77631-2000
Phone: +1 (409) 882-2799
email: mike.hambrick@...


Re: Keypad Error #Keypad

Michael Hambrick <mike.hambrick@...>
 

Hi George

Would you recommend using a dielectric grease on these connections to minimize / prevent corrosion ?

I have never seen any corrosion on my keypad or mount cables, but I have seen some corrosion on the USB cables that plug into my cameras.


Best Regards

Michael Hambrick
ARLANXEO
TSR Global Manufacturing Support
PO Box 2000
Orange, TX 77631-2000
Phone: +1 (409) 882-2799
email: mike.hambrick@...


Re: Keypad Error #Keypad

Dean Jacobsen
 


Re: Keypad Error #Keypad

George
 

Dean,

 

You may be experiencing some oxidation issues also.   Please see our Keypad Maintenance Instructions on the Tech Support page for safe opening and checking.   Plug the connectors in and out a few times and insure that they seat fully.  

https://astro-physics.info/tech_support/mounts/keypad/keypad-maintenance-instructions.pdf

 

Regards,

 

George

 

George Whitney

Astro-Physics, Inc.

Phone:  815-282-1513

Email:  george@...

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Dean Jacobsen
Sent: Monday, June 01, 2020 8:41 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] Keypad Error #Keypad

 

I have a backup keypad that I need to replace the old battery and upgrade to the most recent software version.  It hasn't been used for a couple of years.  When plugged it into the CP3 controller for the 900 I got a flashing version number followed by a question mark and then the keypad hangs.

Is this to be expected with a completely dead battery, or is this an indicator of a more serious problem with the keypad?
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Keypad Error #Keypad

Dean Jacobsen
 

I have a backup keypad that I need to replace the old battery and upgrade to the most recent software version.  It hasn't been used for a couple of years.  When plugged it into the CP3 controller for the 900 I got a flashing version number followed by a question mark and then the keypad hangs.

Is this to be expected with a completely dead battery, or is this an indicator of a more serious problem with the keypad?
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: AP now open - question about mount manufacturing order/priority

 

Shailesh,

 

Unfortunately, we don’t have any 1100s available for new orders. We started production just before our shutdown, so are just getting back into that groove. I would anticipate that we would have some available in the Fall. We are not accepting orders for the new run yet.

 

We will likely begin our Mach2 notification for the next run this month.  The parts for these mounts are nearly complete. We’ll should be able to start assembly on these as soon as we finish the first run.

 

Clear Skies,

 

Marj Christen

Astro-Physics, Inc

11250 Forest Hills Rd

Machesney Park, IL 61115

Phone: 815-282-1513

Fax: 815-282-9847

www.astro-physics.com

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Shailesh Trivedi
Sent: Monday, June 01, 2020 4:01 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] AP now open - question about mount manufacturing order/priority

 

I just saw that Marj posted a blog on Friday that communicated to us that AP is up & running with full staff today. This is great news.

This implies that mount production is restarting, please correct if wrong.

I am on the list for a Mach2 from April 2019, but would like to know when an AP1100 with AE may be available.

Any eta about order of assembly & 1100 vs Mach 2?

Shailesh


Re: Case for AP900

sroberts84
 

Thanks a lot!

-- 
I've seen things you people wouldn't believe.
Attack ships on fire off the shoulder of Orion. I watched C-beams glitter in the dark near the Tannhauser gate.
All those moments will be lost in time, like tears in rain. Time to die.

Roy Batty (Jan 8th 2016 - Dec 2019)

On Mon, 2020-06-01 at 12:16 -0700, leszek@... wrote:
https://nalpak.com/skb-iseries-3i-2424-14-case/


AP now open - question about mount manufacturing order/priority

Shailesh Trivedi
 

I just saw that Marj posted a blog on Friday that communicated to us that AP is up & running with full staff today. This is great news.

This implies that mount production is restarting, please correct if wrong.

I am on the list for a Mach2 from April 2019, but would like to know when an AP1100 with AE may be available.

Any eta about order of assembly & 1100 vs Mach 2?

Shailesh


Re: Case for AP900

Leszek
 


Re: Case for AP900

sroberts84
 

Hello,
Looks great, but where have you seen the case with foam for under $300.00?

Thanks.,

S Roberts
-- 
I've seen things you people wouldn't believe.
Attack ships on fire off the shoulder of Orion. I watched C-beams glitter in the dark near the Tannhauser gate.
All those moments will be lost in time, like tears in rain. Time to die.

Roy Batty (Jan 8th 2016 - Dec 2019)

On Mon, 2020-06-01 at 09:28 -0700, leszek@... wrote:
I was looking recently for a case for my ap900gto mount.  It turns out that the SKB iSeries 3I-2424-14 Case is a perfect fit, works well and you can get it online for less than $300 with cubed foam.


Case for AP900

Leszek
 

I was looking recently for a case for my ap900gto mount.  It turns out that the SKB iSeries 3I-2424-14 Case is a perfect fit, works well and you can get it online for less than $300 with cubed foam.


Re: AP 1100 mount and phd2

Leon
 

Thanks, all this help in my learning curve is great!! thanks again!






On Monday, June 1, 2020, 10:12:10 AM CDT, Brian Valente <bvalente@...> wrote:


Leon I am a regular over at PHD, 

i put together a baseline guiding tutorial that should get you most of the way to a working setup, it's often used as a first step to getting your guiding dialed in:



If you have additional questions you can drop those logs over at the phd forums and it's a good starting point for analysis


Brian

On Mon, Jun 1, 2020 at 7:36 AM Leon via groups.io <lftscope=yahoo.com@groups.io> wrote:
Wow, extremely helpful, thank you!!


On Jun 1, 2020, at 9:12 AM, Dean Jacobsen <deanjacobsen@...> wrote:

Leon,

I found this document very helpful when I was learning PHD2 - https://openphdguiding.org/phd2-best-practices/

The guiding assistant is quite good.  I let it do its thing once I get set up and it gets dark.
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 



--
Brian 



Brian Valente


Re: AP 1100 mount and phd2

 

Leon I am a regular over at PHD, 

i put together a baseline guiding tutorial that should get you most of the way to a working setup, it's often used as a first step to getting your guiding dialed in:



If you have additional questions you can drop those logs over at the phd forums and it's a good starting point for analysis


Brian

On Mon, Jun 1, 2020 at 7:36 AM Leon via groups.io <lftscope=yahoo.com@groups.io> wrote:
Wow, extremely helpful, thank you!!


On Jun 1, 2020, at 9:12 AM, Dean Jacobsen <deanjacobsen@...> wrote:

Leon,

I found this document very helpful when I was learning PHD2 - https://openphdguiding.org/phd2-best-practices/

The guiding assistant is quite good.  I let it do its thing once I get set up and it gets dark.
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 



--
Brian 



Brian Valente


Re: AP 1100 mount and phd2

Worsel
 

Leon

This baseline procedure was put together by one of the responders on the PHD2 forum.

"A good way to ensure a solid guiding baseline is to follow the baseline guiding steps, link below. I realize you may have done many of these steps already, but doing them as described gives you (and us) a clean calibration, GA run, and guidelog from which we can further look at your results
 
 
if not, at least do a fresh calibration near the meridian and celestial equator intersection (dec close to 0) followed by a guiding assistant run and 15-30 minutes of uninterrupted guiding"

Bryan


Re: AP 1100 mount and phd2

Leon
 

Wow, extremely helpful, thank you!!


On Jun 1, 2020, at 9:12 AM, Dean Jacobsen <deanjacobsen@...> wrote:

Leon,

I found this document very helpful when I was learning PHD2 - https://openphdguiding.org/phd2-best-practices/

The guiding assistant is quite good.  I let it do its thing once I get set up and it gets dark.
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: AP 1100 mount and phd2

Dean Jacobsen
 

Leon,

I found this document very helpful when I was learning PHD2 - https://openphdguiding.org/phd2-best-practices/

The guiding assistant is quite good.  I let it do its thing once I get set up and it gets dark.
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: SkySafari Pro 6 with GTOCP3

Roland Christen
 

Hang in there for a bit while I research this with our software engineer.

Rolando.



-----Original Message-----
From: Robert Berta <biker123@...>
To: main@ap-gto.groups.io
Sent: Sun, May 31, 2020 8:47 pm
Subject: Re: [ap-gto] SkySafari Pro 6 with GTOCP3

I added a GTO 1100 with CP4 to my existing GTO 900 CP3. One of the reasons I did was because of the Wireless. Sadly the wireless on the CP4 is problematic. I and others have issues of it dropping connections and than having a hard time reconnecting. I was one of the early owners of the CP4 and although there have been a few firmware updates on both the CP4 and hand controller, nothing has corrected the issue. I run Sky Safari Pro latest versions.  I finally had to go with a SKYFi latest unit which does work flawlessly with Sky Safari Pro. I run with a couple of Samsung Android devices....tablet and cell phone. I know AP has been trying to figure out what the issue is but not having any luck. Those runnng Apple devices may have different experiences. 
In short if you are happy with the CP3, and want wireless the SkyFi unit does work great and you won't need to upgrade to the CP4....especially for visual.

I can't figure out why SkyFi works so well and AP doesn't. Perhaps it is the wifi module in the control box itself.

11501 - 11520 of 82280