Date   

Re: CP4 Time & Location

Wes Atchison
 

Thanks guys, sorry for taking up you time.  After I posted the question I opened up " Telescope Setup" and realized there was my answer.  Since getting the mount recently I have very little time out using it and forgot I had entered locations for several sites.

Thank you again for all the great support, wish other companies stood behind their product like you guys do.

Best Regards,

Wes
WA5TKU


Re: CP4 Time & Location

Roland Christen
 

You enter these things in the "Telescope Setup" window.

Rolando



-----Original Message-----
From: Wes Atchison <wa5tku@...>
To: main <main@ap-gto.groups.io>
Sent: Wed, Apr 29, 2020 11:17 am
Subject: [ap-gto] CP4 Time & Location

Trying to get my head around how the CP4 gets the time and location from a computer.  I have read the manual for the CP4 and searched the topic on the group page.  I understand the information from the Keypad when powered up is the location selected in the Keypad.  If only a computer is attached when the CP4 is powered up I understand the time from the computer is uploaded to the CP4.  Where does the location come from?  Also, if a GPS is connected to the computer can that be used as the source of time and location?

If this information has been discussed before on the group I apologize or bring it up again but my search did not find an answer to my question.

Wes
WA5TKU


Re: Mach2 Status Update

Roland Christen
 

Yes, you're on the list, a bit down but within reach ;^)

Rolando



-----Original Message-----
From: Dean Jacobsen <deanjacobsen@...>
To: main <main@ap-gto.groups.io>
Sent: Wed, Apr 29, 2020 10:07 am
Subject: Re: [ap-gto] Mach2 Status Update

On Wed, Apr 29, 2020 at 07:59 AM, dvjbaja wrote:
We can only hope that one of those mounts is Deans!   LOL   
 
One can only hope.  ;-)
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: CP4 Time & Location

George
 

Wes,

 

It comes from APCC or from the AP V2 driver.

 

Regards,

 

George

 

George Whitney

Astro-Physics, Inc.

Phone:  815-282-1513

Email:  george@...

 

From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Wes Atchison
Sent: Wednesday, April 29, 2020 11:17 AM
To: main@ap-gto.groups.io
Subject: [ap-gto] CP4 Time & Location

 

Trying to get my head around how the CP4 gets the time and location from a computer.  I have read the manual for the CP4 and searched the topic on the group page.  I understand the information from the Keypad when powered up is the location selected in the Keypad.  If only a computer is attached when the CP4 is powered up I understand the time from the computer is uploaded to the CP4.  Where does the location come from?  Also, if a GPS is connected to the computer can that be used as the source of time and location?

If this information has been discussed before on the group I apologize or bring it up again but my search did not find an answer to my question.

Wes
WA5TKU


Re: Mach2 Status Update

Dean Jacobsen
 

On Wed, Apr 29, 2020 at 09:01 AM, Rick Socarras wrote:
AP has been busy!  I was notified this Monday that my Mach 2 was ready!  It's on it's way to me now and yes I'm very excited.   Thankfully, the wait was nothing compared to the 130 GTX! Thank you AP for all your hard work in this crazy time.  Stay Safe all...
Congratulations.  It is good to hear that more on this list are receiving theirs.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


CP4 Time & Location

Wes Atchison
 

Trying to get my head around how the CP4 gets the time and location from a computer.  I have read the manual for the CP4 and searched the topic on the group page.  I understand the information from the Keypad when powered up is the location selected in the Keypad.  If only a computer is attached when the CP4 is powered up I understand the time from the computer is uploaded to the CP4.  Where does the location come from?  Also, if a GPS is connected to the computer can that be used as the source of time and location?

If this information has been discussed before on the group I apologize or bring it up again but my search did not find an answer to my question.

Wes
WA5TKU


Re: Mach2 Status Update

Rick Socarras
 

AP has been busy!  I was notified this Monday that my Mach 2 was ready!  It's on it's way to me now and yes I'm very excited.   Thankfully, the wait was nothing compared to the 130 GTX! Thank you AP for all your hard work in this crazy time.  Stay Safe all...


Re: Mach2 Status Update

Dean Jacobsen
 

On Wed, Apr 29, 2020 at 07:59 AM, dvjbaja wrote:
We can only hope that one of those mounts is Deans!   LOL   
 
One can only hope.  ;-)
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Mach2 Status Update

Dean Jacobsen
 

On Wed, Apr 29, 2020 at 07:54 AM, uncarollo2 <chris1011@...> wrote:
We are busy assembling and shipping. I have people doing sub-assemblies at home and I am doing all final assembly and testing here. There are mounts going out pretty much every day now.
 
Thanks for the update.
 
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Mach2 Status Update

dvjbaja
 

We can only hope that one of those mounts is Deans!   LOL   


On Wed, Apr 29, 2020 at 7:54 AM uncarollo2 <chris1011@...> via groups.io <chris1011=aol.com@groups.io> wrote:
We are busy assembling and shipping. I have people doing sub-assemblies at home and I am doing all final assembly and testing here. There are mounts going out pretty much every day now.

Rolando



-----Original Message-----
From: Dean Jacobsen <deanjacobsen@...>
To: main <main@ap-gto.groups.io>
Sent: Wed, Apr 29, 2020 9:03 am
Subject: [ap-gto] Mach2 Status Update

As we get ready to roll into May, I was wondering about the status of the Mach2.  Is there any news for those of us who have pending Mach2 orders?
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: Mach2 Status Update

Roland Christen
 

We are busy assembling and shipping. I have people doing sub-assemblies at home and I am doing all final assembly and testing here. There are mounts going out pretty much every day now.

Rolando



-----Original Message-----
From: Dean Jacobsen <deanjacobsen@...>
To: main <main@ap-gto.groups.io>
Sent: Wed, Apr 29, 2020 9:03 am
Subject: [ap-gto] Mach2 Status Update

As we get ready to roll into May, I was wondering about the status of the Mach2.  Is there any news for those of us who have pending Mach2 orders?
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Mach2 Status Update

Dean Jacobsen
 

As we get ready to roll into May, I was wondering about the status of the Mach2.  Is there any news for those of us who have pending Mach2 orders?
--
Dean Jacobsen
http://astrophoto.net/wp/ 
Image Gallery - http://astrophoto.net/wp/image-gallery/
Astrobin - https://www.astrobin.com/users/deanjacobsen/ 


Re: APCC 1.8.1.1 latest update window missing value

Ray Gralak
 

Hi Yves,

I checked my laptop again. No anti-virus or Windows Defender enabled. Gave APCC access thru firewall just in
case but nothing. I'm still able to check for updates with my all other softwares. It's very strange !!!
Microsoft has been breaking things left and right with Windows updates so I think this is probably being caused by a .Net Framework update that is either missing or broke .Net Framework HTTPS calls. Unfortunately since you are running Windows 7 you may not get updates automatically. There may not even be an update available to fix the problem since Windows 7 is no longer supported by Microsoft.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Yves Laroche
Sent: Tuesday, April 28, 2020 8:11 PM
To: main@ap-gto.groups.io
Subject: Re : Re: [ap-gto] APCC 1.8.1.1 latest update window missing value

Ray,

I checked my laptop again. No anti-virus or Windows Defender enabled. Gave APCC access thru firewall just in
case but nothing. I'm still able to check for updates with my all other softwares. It's very strange !!!


Regards,
Yves


Le 28/04/20 20:44, Ray Gralak <groups3@gralak.com> a écrit :

Something on your computer is blocking the request to get the latest version. Could be an over-
exuberant anti-virus app.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Yves Laroche
> Sent: Tuesday, April 28, 2020 5:18 PM
> To: main@ap-gto.groups.io
> Subject: [ap-gto] APCC 1.8.1.1 latest update window missing value
>
> Hi Ray,
>
> I installed APCC 1.8.1.1 on a Windows 7 x64 machine and the for update section showed that "The
latest version
> of APCC is: 1.8.1.1"
>
> I installed the same APCC version on my Windows 7 x64 laptop and noticed that "The latest version of
APCC is:"
> The version number is missing. Reinstalled the same package but still the same result.
>
> Attached is a screenshot of the behaviour.
>
> Regards,
> Yves
>
>







Re: Mach1 CP3 pier crash!! (Similar to CP4 crash in another thread)

CurtisC
 

I have an observatory.  The Pyramid ordinarily doesn't get very hot.  I tested its output voltage this evening, and it tested at 13.8.  So it came back after appearing dead.  Meanwhile, the little Radio Shack p.s. is connected to the CP3.


Re : Re: [ap-gto] APCC 1.8.1.1 latest update window missing value

Yves Laroche
 

Ray,

I checked my laptop again.  No anti-virus or Windows Defender enabled.  Gave APCC access thru firewall just in case but nothing.  I'm  still able to check for updates with my all other softwares.  It's very strange !!!


Regards,
Yves


Le 28/04/20 20:44, Ray Gralak <groups3@...> a écrit :
Something  on your computer is blocking the request to get the latest version. Could be an  over-exuberant  anti-virus app.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Yves Laroche
> Sent: Tuesday, April 28, 2020 5:18 PM
> To: main@ap-gto.groups.io
> Subject: [ap-gto] APCC 1.8.1.1 latest update window missing value
>
> Hi Ray,
>
> I installed APCC 1.8.1.1 on a Windows 7 x64 machine and the for update section showed that "The latest version
> of APCC is: 1.8.1.1"
>
> I installed the same APCC version on my Windows 7 x64 laptop and noticed that "The latest version of APCC is:"
> The version number is missing.  Reinstalled the same package but still the same result.
>
> Attached is a screenshot of the behaviour.
>
> Regards,
> Yves
>
>





Re: Mach1 CP3 pier crash!! (Similar to CP4 crash in another thread)

David
 

Curtis,

Consider one from Powerwerx too.  They make two, one with a set voltage and two Powerpole jacks on the front, and this one, with an adjustable output.  I started with a Pyramid but that thing got super hot every time I had it out, was heavy and bulky, and didn’t really supply enough power.  These are built very well, I’ve been using them for years without issue, and they run cool and quiet.  Very nice.  https://powerwerx.com/variable-power-supply-digital-meters-30amp

David


On Apr 28, 2020, at 8:57 PM, CurtisC via groups.io <calypte@...> wrote:

Thank you Rolando et al.  The power supply went south.  It's the Pyramid that A-P used to sell.  I substituted a Radio Shack power supply, and the CP3 works fine.  I did a the three park positions available in the keypad successfully.  I need stars now to recalc the mount.  Maybe the Pyramid will come back.  It was much hotter than normal when I disconnected it.


Re: Mach1 CP3 pier crash!! (Similar to CP4 crash in another thread)

CurtisC
 

Thank you Rolando et al.  The power supply went south.  It's the Pyramid that A-P used to sell.  I substituted a Radio Shack power supply, and the CP3 works fine.  I did a the three park positions available in the keypad successfully.  I need stars now to recalc the mount.  Maybe the Pyramid will come back.  It was much hotter than normal when I disconnected it.


Re: AP 1200 won't unpark via APCC

Ray Gralak
 

The error bits that APCC and the driver show originate from the CP4, so if there is an error try power cycling the CP4. Also, there is a separate button in the driver to clear errors. See the help file for more information.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Yves Laroche
Sent: Tuesday, April 28, 2020 4:35 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] AP 1200 won't unpark via APCC

I really understood the meaning. Just to be sure you're not thinking it was a UDP problem.

Another thing I noticed...I got many errors because the motors were not plugged to the CP4 as they should. The
View Error(s) button within APCC is still there even if I pressed the Clear Errors button. Also the big yellow
window from the ASCOM driver still there.

If I disconnect the ASCOM driver and connect it again, the same error rise again. Is it a normal behaviour?
Thanks!

Best regards,
Yves

Le 28/04/20 19:03, Ray Gralak <groups3@gralak.com> a écrit :

Hi Yves,

Thanks for the additional data point!

I didn't mean to imply using UDP is universally bad. In most cases there are no issues with using UDP,
but it is possible for UDP packets to be dropped or sent out of order, which can cause problems. And specifically
because there were issues I could not reproduce I wanted Steve to try using TCP instead.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Yves Laroche
> Sent: Tuesday, April 28, 2020 3:52 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
>
> Hi Ray,
>
> FYI, I have exactly the same setup as Steve (1200GTO, CP4 (latest firmware), latest ASCOM/APCC
updates)
> and everything is working well with UDP. Always use UDP protocol. Just tested with my GTOCP4
without motors
> and no problem. Even watched Steve's video to be sure... Unchecked Auto-Connect and did see
nothing.
>
> Regards,
> Yves
>
> Le 28/04/20 17:48, Ray Gralak <groups3@gralak.com> a écrit :
>
> APCC polls the CP4 once every 5 seconds for that particular status, so it can take up to that long to
> display in the user interface. However, the actual park status changes immediately in the CP4.
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> Author of PEMPro V3: https://www.ccdware.com
> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>
> > -----Original Message-----
> > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Steve Reilly
> > Sent: Tuesday, April 28, 2020 2:42 PM
> > To: main@ap-gto.groups.io
> > Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
> >
> > I did change to TCP and it worked. What I'm looking at now is I saw it initialize the mount the first
time,
> > disconnected, waited a bit, reconnected and no initializing that time. Cycled power and same result
but I
> did see
> > unpark become active shortly afterwards. Is that normal?
> >
> > -Steve
> >
> >
> > -----Original Message-----
> > From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Ray Gralak
> > Sent: Tuesday, April 28, 2020 5:35 PM
> > To: main@ap-gto.groups.io
> > Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
> >
> > You power cycled and the mount APCC could not unpark your mount using TCP?
> >
> > If so, please attach the APCC log file so I can see what happened.
> >
> > -Ray Gralak
> > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> > Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver:
> > https://www.siriusimaging.com/apdriver
> >
> >
> > > -----Original Message-----
> > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf
> > > Of Steve Reilly
> > > Sent: Tuesday, April 28, 2020 2:29 PM
> > > To: main@ap-gto.groups.io
> > > Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
> > >
> > > Done and done with same results. The UDP setting was used by Howard
> > > when we had problems with the system. That’s beyond my paygrade and
> > > seeing how all was working the other night with APCC out of the picture I didn’t want to lose any
more
> imaging
> > time as we’ve had dismal weather the past few months.
> > >
> > > The screen shot is what I see when I opened Initialize Settings.
> > > Already set as you said. And you can clearly see auto connect for the ASCOM driver is unchecked.
> > >
> > >
> > >
> > > -Steve
> > >
> > >
> > >
> > >
> > >
> > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Ray
> > > Gralak
> > > Sent: Tuesday, April 28, 2020 5:18 PM
> > > To: main@ap-gto.groups.io
> > > Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
> > >
> > >
> > >
> > > Steve,
> > >
> > >
> > >
> > > You can edit the initialize settings from APCC's Settings tab like in this screen shot:
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Make sure unpark from last park is configured. Also, don't forget to
> > > uncheck Auto-Connect in the AP V2 Deiver group box!
> > >
> > >
> > >
> > > Then power cycle the mount.
> > >
> > >
> > >
> > > The purpose of the apps being disconnected is so there is only one log
> > > file to look at. I don't care if you have ACP running as long as the ASCOM driver is not connected to
> APCC.
> > >
> > >
> > >
> > > -Ray Gralak
> > >
> > > Author of APCC (Astro-Physics Command Center):
> > > https://www.astro-physics.com/apcc-pro
> > >
> > > Author of PEMPro V3: https://www.ccdware.com
> > >
> > > Author of Astro-Physics V2 ASCOM Driver:
> > > https://www.siriusimaging.com/apdriver
> > >
> > >
> > >
> > >
> > >
> > > > -----Original Message-----
> > >
> > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf
> > > > Of Steve Reilly
> > >
> > > > Sent: Tuesday, April 28, 2020 2:10 PM
> > >
> > > > To: main@ap-gto.groups.io
> > >
> > > > Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
> > >
> > > >
> > >
> > > > Well if I could initialize the mount I would but I get a notice that
> > > > it can not initialize the mount unless RA=0 and
> > >
> > > > DEC=90. The mount is parked where it always is at Park4.
> > >
> > > >
> > >
> > > > -----Original Message-----
> > >
> > > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Ray
> > > > Gralak
> > >
> > > > Sent: Tuesday, April 28, 2020 4:50 PM
> > >
> > > > To: main@ap-gto.groups.io
> > >
> > > > Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
> > >
> > > >
> > >
> > > > Steve,
> > >
> > > >
> > >
> > > > You're making things way too complicated. Can you shut down all
> > > > those apps and try APCC by itself. I've said
> > >
> > > > this many times before do NOT connect APCC to the AP V2 driver for these tests!
> > >
> > > >
> > >
> > > > Do you unpark as part of the mount initialization? If not, setup
> > > > APCC to do that with the ASCOM driver NOT
> > >
> > > > connected. Also, use TCP instead of UDP because commands can be lost
> > > > using UDP and for the purpose of
> > > this
> > >
> > > > test we want to be sure no commands are lost.
> > >
> > > >
> > >
> > > > Shut the mount off, then power it on.
> > >
> > > >
> > >
> > > > APCC should initialize and unpark the mount. Let's see a video of that?
> > >
> > > >
> > >
> > > > -Ray Gralak
> > >
> > > > Author of APCC (Astro-Physics Command Center):
> > > > https://www.astro-physics.com/apcc-pro
> > >
> > > > Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver:
> > >
> > > > https://www.siriusimaging.com/apdriver
> > >
> > > >
> > >
> > > >
> > >
> > > > > -----Original Message-----
> > >
> > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On
> > > > > Behalf
> > >
> > > > > Of Steve Reilly
> > >
> > > > > Sent: Tuesday, April 28, 2020 1:28 PM
> > >
> > > > > To: main@ap-gto.groups.io
> > >
> > > > > Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
> > >
> > > > >
> > >
> > > > > Ray,
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > From our earlier email I had said that I could not unpark using
> > > > > APCC
> > >
> > > > > and that still holds true today. I did install both the newest
> > > > > APCC
> > >
> > > > > versions and ASCOM driver this afternoon and repeated the test. I
> > > > > had done this test before and after
> > > updates
> > >
> > > > today. To clear up any misunderstanding what I did I used Bandicam to record the tests.
> > >
> > > > > The same results so I just uploaded the newest versions test as
> > > > > they
> > >
> > > > > both have the same results. I can park when unparked but I can not
> > >
> > > > > unpark in APCC under any circumstances I know of. I can park and
> > >
> > > > > unpark at will with the driver. I can park in APCC after it's
> > >
> > > > > unparked. See this video
> > >
> > > > > <https://www.dropbox.com/s/4ev8cnm27a56hq1/bandicam%202020-04-28%2
> > > > > 015-
> > >
> > > > > 54-01-424.avi?dl=0>
> > >
> > > > >
> > >
> > > > > I hope this sheds some light on the issue. If I did something
> > >
> > > > > incorrect please advise. Also as a point of interest I disabled
> > > > > APCC
> > >
> > > > > from my startup script for ACP Expert and have been able to image
> > > > > where with it not so much as it hangs
> > >
> > > > waiting on a mount response to parking/unparking which can affect if my roll off roof closes or not.
> > >
> > > > > Maybe my driver configuration? But that works by itself….
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > -Steve
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > -----Original Message-----
> > >
> > > > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of
> > > > > Ray
> > >
> > > > > Gralak
> > >
> > > > > Sent: Monday, April 27, 2020 1:38 PM
> > >
> > > > > To: main@ap-gto.groups.io
> > >
> > > > > Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > Hi Dan,
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > > I was finally able to try a serial/USB FTDI adapter this morning.
> > >
> > > > > > Had
> > >
> > > > >
> > >
> > > > > > to track one down from a friend. This setup is connecting. and seems to be working properly!
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > So, the problem is not with the CP4 or the software, but likely your connection.
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > > I would prefer to keep my original connection setup as the
> > > > > > adapter
> > >
> > > > >
> > >
> > > > > > presents some cable snag issues. Is there anything else I can try?
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > This is going to require you to learn a little about networking
> > > > > and
> > >
> > > > > your home router. That's going to be up to you to do that research.
> > >
> > > > > :-)
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > That said, I suggest you follow what I suggested to Jack in a post
> > >
> > > > > yesterday. That is put your computer and CP4 on your local LAN and
> > > > > configure your home router to use
> > > DHCP
> > >
> > > > (usually they are set that way by default).
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > Then APCC should be able to find your CP4 and communicate correctly.
> > >
> > > > > One caveat... when using DHCP the router may assign a different IP
> > >
> > > > > address to the CP4 each time the CP4 is power on. If you don't
> > > > > want
> > >
> > > > > to use the Find CP4/5 button in APCC when that happens then I
> > > > > suggest
> > >
> > > > > you configure your router to provide the CP4 with a static IP
> > > > > address. This will reserve that IP address for the
> > >
> > > > CP4 and it won't change as long as you use that router.
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > -Ray Gralak
> > >
> > > > >
> > >
> > > > > Author of APCC (Astro-Physics Command Center):
> > >
> > > > > https://www.astro-physics.com/apcc-pro <https://www.astro-
> > >
> > > > > physics.com/apcc-pro>
> > >
> > > > >
> > >
> > > > > Author of PEMPro V3: https://www.ccdware.com
> > >
> > > > > <https://www.ccdware.com> Author of Astro-Physics V2 ASCOM Driver:
> > >
> > > > > https://www.siriusimaging.com/apdriver
> > >
> > > > > <https://www.siriusimaging.com/apdriver>
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > > > -----Original Message-----
> > >
> > > > >
> > >
> > > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> > >
> > > > > > [mailto:main@ap-gto.groups.io
> > >
> > > > > <mailto:main@ap-gto.groups.io> ] On Behalf
> > >
> > > > >
> > >
> > > > > > Of Dan Simpson
> > >
> > > > >
> > >
> > > > > > Sent: Monday, April 27, 2020 9:39 AM
> > >
> > > > >
> > >
> > > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> > >
> > > > >
> > >
> > > > > > Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > > Hi Ray,
> > >
> > > > >
> > >
> > > > > > I did try using a USB cable yesterday but got no response from the mount.
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > > I was finally able to try a serial/USB FTDI adapter this morning.
> > >
> > > > > > Had
> > >
> > > > >
> > >
> > > > > > to track one down from a friend. This setup is connecting. and seems to be working properly!
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > > I would prefer to keep my original connection setup as the
> > > > > > adapter
> > >
> > > > >
> > >
> > > > > > presents some cable snag issues. Is there anything else I can try?
> > >
> > > > >
> > >
> > > > > > Thanks,
> > >
> > > > >
> > >
> > > > > > Dan
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > > On Sun, Apr 26, 2020, 9:30 PM Ray Gralak <groups3@gralak.com
> > > > > > <mailto:groups3@gralak.com
> > > <mailto:groups3@gralak.com%20%3cmailto:groups3@gralak.com <mailto:groups3@gralak.com
<mailto:groups3@gralak.com> <mailto:groups3@gralak.com
> <mailto:groups3@gralak.com> > > > wrote:
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > > Dan,
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > > It sounds like you may have a network problem. So,
> > > > > > did
> > >
> > > > > > you try the
> > >
> > > > >
> > >
> > > > > > alternative I suggested? That is connecting APCC via its USB or
> > >
> > > > > > serial port? If that works, or doesn't work,
> > >
> > > > > helps isolate the problem.
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > > -Ray Gralak
> > >
> > > > >
> > >
> > > > > > Author of APCC (Astro-Physics Command Center):
> > >
> > > > > > https://www.astro-physics.com/apcc-pro
> > >
> > > > > <https://www.astro-physics.com/apcc-pro>
> > >
> > > > >
> > >
> > > > > > Author of PEMPro V3: https://www.ccdware.com
> > >
> > > > > > <https://www.ccdware.com>
> > >
> > > > >
> > >
> > > > > > Author of Astro-Physics V2 ASCOM Driver:
> > >
> > > > >
> > >
> > > > > > https://www.siriusimaging.com/apdriver
> > >
> > > > > > <https://www.siriusimaging.com/apdriver>
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > > > -----Original Message-----
> > >
> > > > >
> > >
> > > > > > > From: main@ap-gto.groups.io
> > >
> > > > > > <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io
> > >
> > > > > <mailto:main@ap-gto.groups.io> ] On Behalf Of Dan Simpson
> > >
> > > > >
> > >
> > > > > > > Sent: Sunday, April 26, 2020 6:46 PM
> > >
> > > > >
> > >
> > > > > > > To: main@ap-gto.groups.io
> > >
> > > > > > <mailto:main@ap-gto.groups.io>
> > >
> > > > >
> > >
> > > > > > > Subject: Re: [ap-gto] AP 1200 won't unpark via
> > > > > > APCC
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > Hi Ray,
> > >
> > > > >
> > >
> > > > > > > I guess my first question would be: what changed?
> > > > > > I
> > >
> > > > > > can't remember
> > >
> > > > >
> > >
> > > > > > the last time I dug into the network settings.
> > >
> > > > >
> > >
> > > > > > > I've been using this exact same setup (GTOCP4,
> > > > > > Cat5e,
> > >
> > > > > > couple of
> > >
> > > > >
> > >
> > > > > > network switches and a dual NIC) for well over
> > >
> > > > >
> > >
> > > > > > > a year. Again, I did nothing, consciously, to change it.
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > In order to simplify things I've run a single
> > > > > > straight
> > >
> > > > > > Cat5e cable
> > >
> > > > >
> > >
> > > > > > between the mount and the computer. I also
> > >
> > > > >
> > >
> > > > > > > disconnected the two other Cat5e cables just to be sure.
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > The one thing that changed right away is that
> > > > > > clicking
> > >
> > > > > > the Find
> > >
> > > > >
> > >
> > > > > > button in the APCC Connection window shows the
> > >
> > > > >
> > >
> > > > > > > mount is available. However, I still cannot Unpark
> > > > > > the
> > >
> > > > > > mount with
> > >
> > > > >
> > >
> > > > > > either the APCC button or the ASCOM
> > >
> > > > >
> > >
> > > > > > V2
> > >
> > > > >
> > >
> > > > > > > button.
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > I tried Unparking with both programs using the
> > > > > > Last Park and Park 4 (my keypad needs an
> > >
> > > > upgrade).
> > >
> > > > > No
> > >
> > > > >
> > >
> > > > > > > response.
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > I also tried to first Park and then Unpark. Again, no response.
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > Reconnecting the Internet-RigRunner cable - to the
> > > > > > motherboard port - caused the connection to
> > >
> > > > fail.
> > >
> > > > >
> > >
> > > > > > > Reconnecting the Digital Logger cable did not affect the connection.
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > Your video lasted a lot longer than my test. I
> > > > > > can,
> > >
> > > > > > apparently,
> > >
> > > > >
> > >
> > > > > > connect the mount to APCC and AP V2 but I am
> > >
> > > > >
> > >
> > > > > > > not able to use that connection in any meaningful way.
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > I've again left some images in my Dropbox folder.
> > > > > > They
> > >
> > > > > > show the LAN
> > >
> > > > >
> > >
> > > > > > settings and what happened when I tried
> > >
> > > > >
> > >
> > > > > > > Parking and Unparking. Hopefully, there might be a clue there.
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > > > https://www.dropbox.com/s/ihmtigiyzllsmmk/APCC%20Simpson%20Scree
> > > > > > n%20
> > >
> > > > > > Captures.zip?dl=0
> > >
> > > > > <https://www.dropbox.com/s/ihmtigiyzllsmmk/APCC%20Simpson%20Screen
> > > > > %20C
> > >
> > > > > aptures.zip?dl=0>
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > Thanks,
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > On Sun, Apr 26, 2020 at 8:44 AM Ray Gralak
> > >
> > > > > > <groups3@gralak.com <mailto:groups3@gralak.com
> > > <mailto:groups3@gralak.com%20%3cmailto:groups3@gralak.com <mailto:groups3@gralak.com
<mailto:groups3@gralak.com> <mailto:groups3@gralak.com
> <mailto:groups3@gralak.com> > >
> > >
> > > > > > wrote:
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > Dan,
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > One more thought...
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > if there is a router on your LAN with an internet connection, what is the subnet of
> the LAN
> > you
> > >
> > > > are
> > >
> > > > >
> > >
> > > > > > using?
> > >
> > > > >
> > >
> > > > > > > (eg. 192.168.1.0)
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > If the CP4 is setup to accept a DHCP address it should be provided one by your
> router. It
> > >
> > > > > shouldn't
> > >
> > > > >
> > >
> > > > > > need to
> > >
> > > > >
> > >
> > > > > > > be on the 169.254.1.x LAN.
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > -Ray Gralak
> > >
> > > > >
> > >
> > > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-
> physics.com/apcc-pro
> > >
> > > > > <https://www.astro-physics.com/apcc-pro>
> > >
> > > > >
> > >
> > > > > > > Author of PEMPro V3: https://www.ccdware.com <https://www.ccdware.com>
> > >
> > > > >
> > >
> > > > > > > Author of Astro-Physics V2 ASCOM Driver:
https://www.siriusimaging.com/apdriver
> > >
> > > > > <https://www.siriusimaging.com/apdriver>
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > > > -----Original Message-----
> > >
> > > > >
> > >
> > > > > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> [mailto:main@ap-
> > >
> > > > gto.groups.io
> > >
> > > > > <mailto:main@ap-gto.groups.io> ] On Behalf Of Dan Simpson
> > >
> > > > >
> > >
> > > > > > > > Sent: Sunday, April 26, 2020 6:57 AM
> > >
> > > > >
> > >
> > > > > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> > >
> > > > >
> > >
> > > > > > > > Subject: Re: [ap-gto] AP 1200 won't unpark via APCC
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > Ray,
> > >
> > > > >
> > >
> > > > > > > > Thanks for the video. I was unaware of the Find feature in the Connection box
> which is
> > very
> > >
> > > > > nice.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > Unfortunately, when I click on the Find button the window pops up but does
not
> show any
> > >
> > > > >
> > >
> > > > > > connection
> > >
> > > > >
> > >
> > > > > > > options.
> > >
> > > > >
> > >
> > > > > > > > I've attached a snip.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > Power is definitely on, Cat5e cable is blinking. Keypad is on.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > I also tried eliminating a couple of network switches with a straight run
between
> the
> > > computer
> > >
> > > > > and
> > >
> > > > >
> > >
> > > > > > the
> > >
> > > > >
> > >
> > > > > > > mount, but
> > >
> > > > >
> > >
> > > > > > > > no joy.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > Closing the Find window and clicking on Mount Connect shows the mount as
> Parked,
> > >
> > > > >
> > >
> > > > > > Tracking=Zero but
> > >
> > > > >
> > >
> > > > > > > the
> > >
> > > > >
> > >
> > > > > > > > APCC Unpark button is non-functional.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > I went ahead and connected the AP V2 ASCOM Driver and tried Unpark.
Again,
> the
> > Mount
> > >
> > > > Info
> > >
> > > > >
> > >
> > > > > > Park
> > >
> > > > >
> > >
> > > > > > > shows
> > >
> > > > >
> > >
> > > > > > > > Unparked for a moment but quickly reverts to Parked.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > I tried connecting TheSkyX and found I could connect and perform a
successful
> goto.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > I tried Parking with TSX and it sent the mount to the Park position but the slew
> message
> > > said
> > >
> > > > >
> > >
> > > > > > Parking
> > >
> > > > >
> > >
> > > > > > > and never
> > >
> > > > >
> > >
> > > > > > > > went to Parked. TSX remained frozen in this state.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > So, what I believe is wrong is the GTOCP4 unit is hosed. There seems to be a
> > >
> > > > communication
> > >
> > > > >
> > >
> > > > > > issue
> > >
> > > > >
> > >
> > > > > > > where it is not
> > >
> > > > >
> > >
> > > > > > > > reporting or recording the current state. It may be something in the firmware or
it
> may be
> > a
> > >
> > > > > physical
> > >
> > > > >
> > >
> > > > > > > problem. All of
> > >
> > > > >
> > >
> > > > > > > > this is way beyond my pay grade. I think I need to contact AP directly and try
to
> work
> > > through
> > >
> > > > > this
> > >
> > > > >
> > >
> > > > > > with
> > >
> > > > >
> > >
> > > > > > > them. Do
> > >
> > > > >
> > >
> > > > > > > > you think that is a reasonable conclusion?
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > Thanks for all the time and help.
> > >
> > > > >
> > >
> > > > > > > > Dan
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > On Sat, Apr 25, 2020 at 3:46 PM Dan Simpson via groups.io
> > >
> > > > <dbs2144=gmail.com@groups.io
> > >
> > > > > <mailto:dbs2144=gmail.com@groups.io> >
> > >
> > > > >
> > >
> > > > > > wrote:
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > Thanks Ray, I'll take a look later this evening.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > I will say I did forget to check that there was power to the mount when I
first
> started up
> > >
> > > > > today.
> > >
> > > > >
> > >
> > > > > > The
> > >
> > > > >
> > >
> > > > > > > runaway
> > >
> > > > >
> > >
> > > > > > > > at the end of my last session had caused me to hit the power switch on the
> 12vdc power
> > >
> > > > supply
> > >
> > > > >
> > >
> > > > > > not my
> > >
> > > > >
> > >
> > > > > > > Digital
> > >
> > > > >
> > >
> > > > > > > > Logger switch. When I switched on the DL this morning it faithfully switched on
> but the
> > > power
> > >
> > > > >
> > >
> > > > > > supply
> > >
> > > > >
> > >
> > > > > > > switch was
> > >
> > > > >
> > >
> > > > > > > > still off. Took me a bit to figure it out.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > Thanks,
> > >
> > > > >
> > >
> > > > > > > > Dan
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > On Sat, Apr 25, 2020, 3:23 PM Ray Gralak <groups3@gralak.com
> > >
> > > > > <mailto:groups3@gralak.com> > wrote:
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > Dan,
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > Here is a link to the youtube video demonstrating park and unpark.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > To provide a baseline try to perform the operations I do in the video
> *exactly* the
> > > way
> > >
> > > > I
> > >
> > > > >
> > >
> > > > > > have
> > >
> > > > >
> > >
> > > > > > > done
> > >
> > > > >
> > >
> > > > > > > > them.
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > https://youtu.be/shWsRr-gRWE <https://youtu.be/shWsRr-gRWE>
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > > -Ray Gralak
> > >
> > > > >
> > >
> > > > > > > > Author of APCC (Astro-Physics Command Center):
https://www.astro-
> > >
> > > > > physics.com/apcc- <https://www.astro-physics.com/apcc->
> > >
> > > > >
> > >
> > > > > > pro
> > >
> > > > >
> > >
> > > > > > > > Author of PEMPro V3: https://www.ccdware.com
> <https://www.ccdware.com>
> > >
> > > > >
> > >
> > > > > > > > Author of Astro-Physics V2 ASCOM Driver:
> > https://www.siriusimaging.com/apdriver
> > >
> > > > > <https://www.siriusimaging.com/apdriver>
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > > >
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > > >
> > >
> > >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
>
>







Re: Mach1 CP3 pier crash!! (Similar to CP4 crash in another thread)

Roland Christen
 

The Pyramid has an internal overload breaker. It resets automatically but it takes some time to reset.

Rolando



-----Original Message-----
From: Steven Steven <steven447@...>
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Sent: Tue, Apr 28, 2020 7:21 pm
Subject: Re: [ap-gto] Mach1 CP3 pier crash!! (Similar to CP4 crash in another thread)

If you unscrew the bottom plate (underneath), you'll see two big capacitors. It's usually one of them that 'goes'. You can buy these for around $1 and replace it yourself very easily. I've done that with two of my pyramids, then I got 'smart' and got a better power supply.

S


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Michael 'Mikey' Mangieri <mjmangieri@...>
Sent: Tuesday, 28 April 2020 8:13 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Mach1 CP3 pier crash!! (Similar to CP4 crash in another thread)
 
I use pyramid supplies on all my equipment. Mine have overload protection. Typically they shut down when overload is detected. Turn them off, wait a bit, then back on. But it may depend on the model you have. 


On Apr 28, 2020, at 8:10 PM, Michael Hambrick via groups.io <mike.hambrick@...> wrote:

Does the power supply have overload protection ? You may be lucky and only have to replace a fuse.


Best Regards

Michael Hambrick
ARLANXEO
TSR Global Manufacturing Support
PO Box 2000
Orange, TX 77631-2000
Phone: +1 (409) 882-2799
email: mike.hambrick@...


Re: APCC 1.8.1.1 latest update window missing value

Ray Gralak
 

Something on your computer is blocking the request to get the latest version. Could be an over-exuberant anti-virus app.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Yves Laroche
Sent: Tuesday, April 28, 2020 5:18 PM
To: main@ap-gto.groups.io
Subject: [ap-gto] APCC 1.8.1.1 latest update window missing value

Hi Ray,

I installed APCC 1.8.1.1 on a Windows 7 x64 machine and the for update section showed that "The latest version
of APCC is: 1.8.1.1"

I installed the same APCC version on my Windows 7 x64 laptop and noticed that "The latest version of APCC is:"
The version number is missing. Reinstalled the same package but still the same result.

Attached is a screenshot of the behaviour.

Regards,
Yves

12421 - 12440 of 82438