Date   

Re: How to Raise AP1600 Height

Jack Huerkamp
 

Don,

Those are Linak DL270CA00500655 lifting columns.  I purchased two of them along with the control box, power cord, handset and motor cables directly from Linak back in September of 2019.  When I purchased my original 1000 Newton column system, I was the Chief of Engineering for a public utility in New Orleans and we had a complete machine shop, welding shop and electrical fabrication shop and utilized these skilled trades to keep our 100 plus year old drainage and puming systems operational.  Because of my connection to a manufacturing company, Linak agreed to sell the original system to me.  And when I desired to upgrade the system to one with more thrust, Linak agreed to do so under my existing account.

Linak makes these columns with three different thrust levels - 1000 Newton (225#), 1500 Newton (337.5#) and 2500 Newton (562.5#).  If I had known how much load I would ultimately place on the lifting columns, I would have purchased the 2500 Newton units.  The difference in cost was minimal.

Yours truly,

Jack Huerkamp


Re: APCC rate settings

Cheng-Yang Tan
 

Hi Ray,
   FYI, your driver sees the update!

Inline image

cytan

On Friday, March 20, 2020, 10:07:21 PM CDT, Ray Gralak <groups3@...> wrote:


Hi Cytan,

I got the dump. Yes, IPV4 is enabled.

So something must be blocking the transfer, but I don't know what that could be. There are no hits from your IP address and no errors in the server's error log.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> Sent: Friday, March 20, 2020 8:01 PM
> Subject: Re: [ap-gto] APCC rate settings
>
> I just sent the info to Ray.
>
> cytan
>
> On Friday, March 20, 2020, 09:56:54 PM CDT, Bill Long <bill@...> wrote:
>
>
> Open CMD.exe and run this:
>
> ipconfig /all
>
> Then paste in the results into an email to Ray directly.
>
> ________________________________
>
> From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io
> <cytan299=yahoo.com@groups.io>
> Sent: Friday, March 20, 2020 7:54 PM
> Subject: Re: [ap-gto] APCC rate settings
>
> Hi Ray,
>    You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it
> explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.
>
>    Windows10 is at latest service pack and everything is up to date.
>
> cytan
>
> On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
> Brian and cytan,
>
> 1. I am wondering if you have IPV4 enabled on your LAN port?
>
> 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606019629&sdata=lBKk8%2BSEFz%2BCe9KEq8tzImXJWqFfTI9CgIjwNSlIqE4%3D&r
> eserved=0>
> Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606029634&sdata=3iervM1WtC4d6dsFZT7xv6YqfUfOKTK9QB64dwY3oSc%3D&reserved=0>
> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606029634&sdata=2ivRISzWZErLusFe7buaD5Mxu1Sv%2B8vhyfSS2eru2uE%3D&reserved=
> 0>
>
>
> > -----Original Message-----
> > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On Behalf Of
> Brian Valente
> > Sent: Friday, March 20, 2020 7:27 PM
> > Subject: Re: [ap-gto] APCC rate settings
> >
> > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here
> >
> > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
> >
> >
> >    Hi Ray,
> >      I added APCC to the firewall but the problem remains:
> >    Inline image
> >
> >    cytan
> >
> >
> >
> >    On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:
> >
> >
> >    > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
> >
> >    AstroPhysicsCommandCenter.exe
> >
> >    -Ray Gralak
> >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606039648&sdata=aM%2FZfeF17TAQzpkbaUP3fLmHdJnBb6nKO2BIYfJn3Qs%3D&r
> eserved=0>
> >    Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606039648&sdata=tp2vS%2FlsqpS%2B4J18VxFiTkkoDTdTRSS2ucqXyP%2Br%2Bsg%3D&reserved=0>
> >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606049652&sdata=TiIeta1020YGk8DiTDm4Cwtga1Ifo%2BUs6%2B%2BdU%2BuETNQ%3D&r
> eserved=0>
> >
> >
> >    > -----Original Message-----
> >    > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On Behalf
> Of Cheng-Yang Tan via
> > Groups.Io
> >    > Sent: Friday, March 20, 2020 10:55 AM
> >    > Subject: Re: [ap-gto] APCC rate settings
> >    >
> >    > Hi Ray,
> >    >    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks
> > Mac user :)
> >    > Here's the screen shot for the firewall settings on my Win 10:
> >    >
> >    > Inline image
> >    >
> >    > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
> >    >
> >    > cytan
> >    >
> >    >
> >    >
> >    > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
> >    >
> >    >
> >    > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked
> > yes to a
> >    > prompt that disabled APCC from being able to access the web. There is not much else that could prevent
> > APCC
> >    > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
> > updated
> >    > an optional update related to .Net framework.
> >    >
> >    > -Ray Gralak
> >    > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606049652&sdata=Qfzz44eu%2Bsqy7t3zIwvoV%2Ffd%2Fij2fHTbgRzt2ryanJE%3D&r
> eserved=0>
> >    > Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606059657&sdata=1izWYSNBYIO5Yxaud1eZhDelwCeCg8WN2tuvpcp9bqI%3D&reserved=0>
> >    > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606059657&sdata=xUoFELfEqy19cU8i4NJ1h0TBuW5IRqv0%2BJRnuEE4fp0%3D&reserved
> =0>
> >    >
> >    >
> >    > > -----Original Message-----
> >    > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On Behalf
> Of Cheng-Yang Tan via
> > Groups.Io
> >    > > Sent: Friday, March 20, 2020 10:37 AM
> >    > > Subject: Re: [ap-gto] APCC rate settings
> >    > >
> >    > > Hi Ray
> >    > >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on
> > Win10?
> >    > >
> >    > > cytan
> >    > >
> >    > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
> >    > >
> >    > >
> >    > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your
> > computer.
> >    > >
> >    > > Try turning AV off then try again.
> >    > >
> >    > > -Ray Gralak
> >    > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606069666&sdata=FTZM1Lc%2FB1RIVwozaPxqWiy8aIN%2B675utSAoeMOjN8U%3D
> &reserved=0>
> >    > > Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606069666&sdata=OBvNom9tDLeuraPdX7fp3IBYpYU2lb3CA3G6uBiZCVk%3D&reserved=0>
> >    > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606079671&sdata=6zOWLTccnKDQSYgebTLcV%2FYz51A0Jq2b5%2FPnxmUwxWU%3D&re
> served=0>
> >    > >
> >    > >
> >    > > > -----Original Message-----
> >    > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On
> Behalf Of Cheng-Yang Tan via
> > Groups.Io
> >    > > > Sent: Friday, March 20, 2020 9:45 AM
> >    > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > Subject: Re: [ap-gto] APCC rate settings
> >    > > >
> >    > > > Hi Ray
> >    > > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,>
> > <https://www.siriusimaging.com,>
> >    > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
> >    > > update.
> >    > > >
> >    > > > cytan
> >    > > >
> >    > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
> >    > > >
> >    > > >
> >    > > > No connection is required.
> >    > > >
> >    > > > You're computer/browser must be able to access https://www.siriusimaging.com.
> >    > > >
> >    > > > -Ray Gralak
> >    > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606079671&sdata=6WHu4aBMxXmVFe1N1Mu0nh1IDjbOrp3idN2wuQPhIuA%3D&res
> erved=0>
> >    > > > Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606089680&sdata=wB1HeuAfvnYU%2FmZ%2BCedOJ7sZO2e3gBoZTvc3fbORmUU%3D&reserved=0>
> >    > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606089680&sdata=GTbqu1ZEnHo76FVsMV07GTDXNihy0K7Z37zYoxFPYvM%3D&reserved
> =0>
> >    > > >
> >    > > >
> >    > > > > -----Original Message-----
> >    > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On
> Behalf Of Konstantin von
> >    > > > > Sent: Friday, March 20, 2020 8:16 AM
> >    > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > > Subject: Re: [ap-gto] APCC rate settings
> >    > > > >
> >    > > > > Hi Ray,
> >    > > > >
> >    > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are
> > available. Do I
> >    > > have
> >    > > > > to be connected to a mount?
> >    > > > >
> >    > > > > Konstantin
> >    > > > >
> >    > > > >
> >    > > > > Konstantin v. Poschinger
> >    > > > >
> >    > > > > Hammerichstr. 5
> >    > > > > 22605 Hamburg
> >    > > > > 040/8805747
> >    > > > > 0171 1983476
> >    > > > >
> >    > > > >
> >    > > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
> >    > > > >
> >    > > > >    Hi Brian,
> >    > > > >
> >    > > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help
> > menu
> >    > > > > you can use Check for updates to get the download link.
> >    > > > >
> >    > > > >    -Ray Gralak
> >    > > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606099685&sdata=E%2BiQfKM5A8tby1LT8BQ%2BcHCnp5n4TfC2GFQAhQXoUCA%
> 3D&reserved=0>
> >    > > > >    Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606099685&sdata=juuzL1G3w%2Be410opEygk3XmLYTlBeylE2xd%2FSMZWU%2Bw%3D&reserved=0>
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606099685&sdata=juuzL1G3w%2Be410opEygk3XmLYTlBeylE2xd%2FSMZWU%2Bw%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606109694&sdata=qrKU07DMQa7PIF8SHtHDv%2BcnTX7IP%2BEMJMNndwqjelk%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606109694&sdata=qrKU07DMQa7PIF8SHtHDv%2BcnTX7IP%2BEMJMNndwqjelk%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606119704&sdata=HrtaDN9h6ZyZU52BF0qEombtDxcYboCjJ7yYMIT718E%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606119704&sdata=HrtaDN9h6ZyZU52BF0qEombtDxcYboCjJ7yYMIT718E%3D&reserved=0> >
> >    > > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606129713&sdata=Pxri8iOW7HNtxdtQVrIriaIonNzSACZfHdjqF%2BgeKzk%3D&reserved=0>
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >        -----Original Message-----
> >    > > > >        From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On
> Behalf Of Brian Valente
> >    > > > >        Sent: Thursday, March 19, 2020 8:39 PM
> >    > > > >        To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > >        Subject: Re: [ap-gto] APCC rate settings
> >    > > > >
> >    > > > >        Ray where can we download this latest version?
> >    > > > >
> >    > > > >        AP site only has link to 1.8.0.5 right now
> >    > > > >
> >    > > > >        thanks -Brian
> >    > > > >
> >    > > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
> >    > > > >
> >    > > > >
> >    > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> > now;
> >    > > > > formerly
> >    > > > >        there
> >    > > > >        > were several more?
> >    > > > >
> >    > > > >        That was fixed in 1.8.0.8/9.
> >    > > > >
> >    > > > >        -Ray Gralak
> >    > > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606129713&sdata=CErKXfkGrtk5bCxG0ePWlQONph7%2Bs8cdjeE9mLoGuL8%3D&re
> served=0>
> >    > > > >        Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606139717&sdata=UL5K0xcR4Gy5KPoAZ%2FKacCd5dQbaog8Qk8TlK8GPM3w%3D&reserved=0>
> >    > > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606139717&sdata=76a3EFYZecW4WG8jtEeevDMw4ed%2BQvnU3il1JxH0z4c%3D&reserved
> =0>
> >    > > > >
> >    > > > >
> >    > > > >        > -----Original Message-----
> >    > > > >        > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io]
> On Behalf Of Peter Bresler via
> >    > > > > Groups.Io
> >    > > > >        > Sent: Thursday, March 19, 2020 8:11 PM
> >    > > > >        > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > >        > Subject: [ap-gto] APCC rate settings
> >    > > > >        >
> >    > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> > now;
> >    > > > > formerly
> >    > > > >        there
> >    > > > >        > were several more?
> >    > > > >        >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >        --
> >    > > > >
> >    > > > >        Brian
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >        Brian Valente
> >    > > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606149722&sdata=q4lkAITUeJaxxigEjjPxe73dg%2B52QFmJJz2p65PnxJM%3D&reserved=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606149722&sdata=q4lkAITUeJaxxigEjjPxe73dg%2B52QFmJJz2p65PnxJM%3D&reserved=0>
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606159727&sdata=6gRCJiJ%2BPEwmHLS3h%2B7LeLwraZPdwAhex1RKPMhdfTg%3D&reserv
> ed=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606159727&sdata=6gRCJiJ%2BPEwmHLS3h%2B7LeLwraZPdwAhex1RKPMhdfTg%3D&reserv
> ed=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606169736&sdata=pSwkYYTzxPzykbZHkcR1VzdoQ587Dh1KWEYr6h0vqjw%3D&reserved=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606169736&sdata=pSwkYYTzxPzykbZHkcR1VzdoQ587Dh1KWEYr6h0vqjw%3D&reserved=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606179741&sdata=1dXIGVZodSvmeqKWVOKZeGmR%2FW7hKUOm92KtpJ%2B7wQ4%3D&res
> erved=0> > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > >
> >    > > >
> >    > > >
> >    > > >
> >    > > >
> >    > > >
> >    > >
> >    > >
> >    > >
> >    > >
> >    > >
> >    > >
> >    >
> >    >
> >    >
> >    >
> >    >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> >
> > Brian
> >
> >
> >
> > Brian Valente
> > portfolio brianvalentephotography.com  <http://brianvalentephotography.com
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606179741&sdata=1dXIGVZodSvmeqKWVOKZeGmR%2FW7hKUOm92KtpJ%2B7wQ4%3D&res
> erved=0> >
> >
>
>
>
>
>
>




Re: Astro-Physics status during IL shut-down

Worsel
 

I received a notice from UPS.  The following is extracted from the notice.  Something similar from FEDEX.

Bryan
-----------

We want to do all we can to keep you informed as the efforts to slow the spread of coronavirus continue.

We’d like to reassure you that UPS operations and The UPS Store
®
locations have been designated by the Governors’ offices in all 50 states as critical infrastructure, and we continue to pick up and deliver, even in restricted areas.


Re: Astro-Physics status during IL shut-down

Dominique Durand
 
Edited

Thank you Family A-P.
Be careful. Stay safe.It is true,
That for us Astro-nuts, confined, a Mach2 would be likely to cheer us up.

Dominique


Re: RAPAS App

Christopher Go
 

The one I use is an android version.  Please go to settings and change the reticle to Astrophysics.

Regards,
Chris


At 01:20 AM 3/21/2020 -0500, you wrote:
That one looks nice but only for the Apple store. I don't see an Android version.





Thanks,
Charles

Sent from mobile device.


-------- Original message --------
From: Donald Rudny <mkea13800@...>
Date: 3/21/20 12:24 AM (GMT-06:00)
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] RAPAS App

This is the best app to use with RAPAS.  It considers refraction that can be significant at lower latitudes.

[]

Don Rudny
P.O. Box 106
Pepeekeo, HI 96783-0106

312-209-5870

On Mar 20, 2020, at 6:50 PM, Frost David <frosty5@...> wrote:


It’s on Astro-Physics website.  Just look there at the RAPAS page.  All the links are there. 

On Mar 21, 2020, at 12:11 AM, Christopher Go <chris@...> wrote:

 Did you go to settings and change to Astrophysics reticle?  This is what I have:

<72a7af.jpg>


Regards,
Chris

At 03:37 AM 3/21/2020 +0000, you wrote:
That's what I have.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:35 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
The one I have looks like the windows version. I don't think you have the right app.  I have been using it for years and it works very well.

Regards,
Chris

At 03:23 AM 3/21/2020 +0000, you wrote:
That app is not very good, IMHO. The iOS one looks the same as the AP RAPAS Windows app. Would be nice to have the same offering on Android.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:20 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
Look for PolarFinder.  It is NOT a free app though but worth buying.

Regards,
Chris

At 10:11 PM 3/20/2020 -0500, you wrote:
From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.



Thanks,
Charles


Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net


Re: RAPAS App

Charles Thompson
 

That one looks nice but only for the Apple store. I don't see an Android version. 





Thanks,
Charles

Sent from mobile device.


-------- Original message --------
From: Donald Rudny <mkea13800@...>
Date: 3/21/20 12:24 AM (GMT-06:00)
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] RAPAS App

This is the best app to use with RAPAS.  It considers refraction that can be significant at lower latitudes.



Don Rudny
P.O. Box 106
Pepeekeo, HI 96783-0106

312-209-5870

On Mar 20, 2020, at 6:50 PM, Frost David <frosty5@...> wrote:


It’s on Astro-Physics website.  Just look there at the RAPAS page.  All the links are there.  

On Mar 21, 2020, at 12:11 AM, Christopher Go <chris@...> wrote:

 Did you go to settings and change to Astrophysics reticle?  This is what I have:

<72a7af.jpg>


Regards,
Chris

At 03:37 AM 3/21/2020 +0000, you wrote:
That's what I have.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:35 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
The one I have looks like the windows version. I don't think you have the right app.  I have been using it for years and it works very well.

Regards,
Chris

At 03:23 AM 3/21/2020 +0000, you wrote:
That app is not very good, IMHO. The iOS one looks the same as the AP RAPAS Windows app. Would be nice to have the same offering on Android.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:20 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
Look for PolarFinder.  It is NOT a free app though but worth buying.

Regards,
Chris

At 10:11 PM 3/20/2020 -0500, you wrote:
From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.



Thanks,
Charles


Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net


Re: RAPAS App

Donald Rudny
 

This is the best app to use with RAPAS.  It considers refraction that can be significant at lower latitudes.



Don Rudny
P.O. Box 106
Pepeekeo, HI 96783-0106

312-209-5870

On Mar 20, 2020, at 6:50 PM, Frost David <frosty5@...> wrote:


It’s on Astro-Physics website.  Just look there at the RAPAS page.  All the links are there.  

On Mar 21, 2020, at 12:11 AM, Christopher Go <chris@...> wrote:

 Did you go to settings and change to Astrophysics reticle?  This is what I have:

<72a7af.jpg>


Regards,
Chris

At 03:37 AM 3/21/2020 +0000, you wrote:
That's what I have.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:35 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
The one I have looks like the windows version. I don't think you have the right app.  I have been using it for years and it works very well.

Regards,
Chris

At 03:23 AM 3/21/2020 +0000, you wrote:
That app is not very good, IMHO. The iOS one looks the same as the AP RAPAS Windows app. Would be nice to have the same offering on Android.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:20 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
Look for PolarFinder.  It is NOT a free app though but worth buying.

Regards,
Chris

At 10:11 PM 3/20/2020 -0500, you wrote:
From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.



Thanks,
Charles


Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net


Re: RAPAS App

Charles Thompson
 

I don't know how I missed that link on their page. It goes to the PolarFinder app we were discussing so I guess that's that. Thanks for the info!





Thanks,
Charles

Sent from mobile device.


-------- Original message --------
From: Frost David <frosty5@...>
Date: 3/20/20 11:50 PM (GMT-06:00)
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] RAPAS App

It’s on Astro-Physics website.  Just look there at the RAPAS page.  All the links are there.  

On Mar 21, 2020, at 12:11 AM, Christopher Go <chris@...> wrote:

 Did you go to settings and change to Astrophysics reticle?  This is what I have:

<72a7af.jpg>


Regards,
Chris

At 03:37 AM 3/21/2020 +0000, you wrote:
That's what I have.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:35 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
The one I have looks like the windows version. I don't think you have the right app.  I have been using it for years and it works very well.

Regards,
Chris

At 03:23 AM 3/21/2020 +0000, you wrote:
That app is not very good, IMHO. The iOS one looks the same as the AP RAPAS Windows app. Would be nice to have the same offering on Android.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:20 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
Look for PolarFinder.  It is NOT a free app though but worth buying.

Regards,
Chris

At 10:11 PM 3/20/2020 -0500, you wrote:
From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.



Thanks,
Charles


Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net


Re: RAPAS App

Frost David
 

It’s on Astro-Physics website.  Just look there at the RAPAS page.  All the links are there.  

On Mar 21, 2020, at 12:11 AM, Christopher Go <chris@...> wrote:

 Did you go to settings and change to Astrophysics reticle?  This is what I have:

<72a7af.jpg>


Regards,
Chris

At 03:37 AM 3/21/2020 +0000, you wrote:
That's what I have.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:35 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
The one I have looks like the windows version. I don't think you have the right app.  I have been using it for years and it works very well.

Regards,
Chris

At 03:23 AM 3/21/2020 +0000, you wrote:
That app is not very good, IMHO. The iOS one looks the same as the AP RAPAS Windows app. Would be nice to have the same offering on Android.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:20 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
Look for PolarFinder.  It is NOT a free app though but worth buying.

Regards,
Chris

At 10:11 PM 3/20/2020 -0500, you wrote:
From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.



Thanks,
Charles


Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net


Re: CORRECTION: Official direct links to APCC v1.8.0.8/9 and AP V2 Driver 5.30.09

 

works great! thanks Ray


On Fri, Mar 20, 2020 at 9:01 PM Ray Gralak <groups3@...> wrote:
For those who are having trouble with a problem with Check for updates here are the direct links to the downloads:

AP V2 driver 5.30.09:
http://www.gralak.com/apdriver/AstroPhysics_V2_Setup_5.30.09.exe

APCC Standard 1.8.0.8:
http://www.apastrosoftware.com/apcc_download/APCC_Standard_Setup_1.8.0.8.exe

APCC Pro 1.8.0.9:
http://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.8.0.9.exe

APCC Standard PDF:
http://www.apastrosoftware.com/apcc_download/apcc-std.pdf

APCC Pro PDF:
http://www.apastrosoftware.com/apcc_download/apcc-pro.pdf

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver







--
Brian 



Brian Valente


Re: RAPAS App

Christopher Go
 

Did you go to settings and change to Astrophysics reticle?  This is what I have:

Emacs!

Regards,
Chris


At 03:37 AM 3/21/2020 +0000, you wrote:
That's what I have.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:35 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
The one I have looks like the windows version. I don't think you have the right app.  I have been using it for years and it works very well.

Regards,
Chris

At 03:23 AM 3/21/2020 +0000, you wrote:
That app is not very good, IMHO. The iOS one looks the same as the AP RAPAS Windows app. Would be nice to have the same offering on Android.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:20 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
Look for PolarFinder.  It is NOT a free app though but worth buying.

Regards,
Chris

At 10:11 PM 3/20/2020 -0500, you wrote:
From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.



Thanks,
Charles


Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net


Re: RAPAS App

Charles Thompson
 

I have the PolarFinder (blue icon) app and it seems to work ok. I was just curious if there was an actual AP made version. Thanks everyone, I'll continue with the one I have :)



Thanks,
Charles

Sent from mobile device.


-------- Original message --------
From: Bill Long <bill@...>
Date: 3/20/20 10:37 PM (GMT-06:00)
To: Christopher Go <chris@...>, main@ap-gto.groups.io
Subject: Re: [ap-gto] RAPAS App

That's what I have.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:35 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App
 
The one I have looks like the windows version. I don't think you have the right app.  I have been using it for years and it works very well.

Regards,
Chris

At 03:23 AM 3/21/2020 +0000, you wrote:
That app is not very good, IMHO. The iOS one looks the same as the AP RAPAS Windows app. Would be nice to have the same offering on Android.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:20 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
Look for PolarFinder.  It is NOT a free app though but worth buying.

Regards,
Chris

At 10:11 PM 3/20/2020 -0500, you wrote:
From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.



Thanks,
Charles


Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net


Re: Official direct links to APCC v1.8.0.8/9 and AP V2 Driver 5.30.09

Ray Gralak
 

Oh, that's my fault!

I am so used to using https: on my website, but should be http:

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente
Sent: Friday, March 20, 2020 8:20 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Official direct links to APCC v1.8.0.8/9 and AP V2 Driver 5.30.09

PS that was just clicking on the links you provided above - the pro version and pro PDF

On Fri, Mar 20, 2020 at 8:12 PM Ray Gralak <groups3@gralak.com> wrote:


For those who are having trouble with a problem with Check for updates here are the direct links to the
downloads:

AP V2 driver 5.30.09:
https://www.gralak.com/apdriver/AstroPhysics_V2_Setup_5.30.09.exe

APCC Standard 1.8.0.8:
https://www.apastrosoftware.com/apcc_download/APCC_Standard_Setup_1.8.0.8.exe

APCC Pro 1.8.0.9:
https://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.8.0.9.exe

APCC Standard PDF:
https://www.apastrosoftware.com/apcc_download/apcc-std.pdf

APCC Pro PDF:
https://www.apastrosoftware.com/apcc_download/apcc-pro.pdf

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver









--

Brian



Brian Valente
portfolio brianvalentephotography.com <http://brianvalentephotography.com>


CORRECTION: Official direct links to APCC v1.8.0.8/9 and AP V2 Driver 5.30.09

Ray Gralak
 

For those who are having trouble with a problem with Check for updates here are the direct links to the downloads:

AP V2 driver 5.30.09:
http://www.gralak.com/apdriver/AstroPhysics_V2_Setup_5.30.09.exe

APCC Standard 1.8.0.8:
http://www.apastrosoftware.com/apcc_download/APCC_Standard_Setup_1.8.0.8.exe

APCC Pro 1.8.0.9:
http://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.8.0.9.exe

APCC Standard PDF:
http://www.apastrosoftware.com/apcc_download/apcc-std.pdf

APCC Pro PDF:
http://www.apastrosoftware.com/apcc_download/apcc-pro.pdf

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


Re: APCC rate settings

Cheng-Yang Tan
 

It’s not that critical. If you post the link to the latest update I’d just download it directly.

On Friday, March 20, 2020, 10:07 PM, Ray Gralak <groups3@...> wrote:

Hi Cytan,

I got the dump. Yes, IPV4 is enabled.

So something must be blocking the transfer, but I don't know what that could be. There are no hits from your IP address and no errors in the server's error log.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io
> Sent: Friday, March 20, 2020 8:01 PM
> Subject: Re: [ap-gto] APCC rate settings
>
> I just sent the info to Ray.
>
> cytan
>
> On Friday, March 20, 2020, 09:56:54 PM CDT, Bill Long <bill@...> wrote:
>
>
> Open CMD.exe and run this:
>
> ipconfig /all
>
> Then paste in the results into an email to Ray directly.
>
> ________________________________
>
> From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io
> <cytan299=yahoo.com@groups.io>
> Sent: Friday, March 20, 2020 7:54 PM
> Subject: Re: [ap-gto] APCC rate settings
>
> Hi Ray,
>    You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it
> explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.
>
>    Windows10 is at latest service pack and everything is up to date.
>
> cytan
>
> On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:
>
>
> Brian and cytan,
>
> 1. I am wondering if you have IPV4 enabled on your LAN port?
>
> 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework?
>
> -Ray Gralak
> Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606019629&sdata=lBKk8%2BSEFz%2BCe9KEq8tzImXJWqFfTI9CgIjwNSlIqE4%3D&r
> eserved=0>
> Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606029634&sdata=3iervM1WtC4d6dsFZT7xv6YqfUfOKTK9QB64dwY3oSc%3D&reserved=0>
> Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606029634&sdata=2ivRISzWZErLusFe7buaD5Mxu1Sv%2B8vhyfSS2eru2uE%3D&reserved=
> 0>
>
>
> > -----Original Message-----
> > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On Behalf Of
> Brian Valente
> > Sent: Friday, March 20, 2020 7:27 PM
> > Subject: Re: [ap-gto] APCC rate settings
> >
> > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here
> >
> > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
> >
> >
> >    Hi Ray,
> >      I added APCC to the firewall but the problem remains:
> >    Inline image
> >
> >    cytan
> >
> >
> >
> >    On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote:
> >
> >
> >    > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
> >
> >    AstroPhysicsCommandCenter.exe
> >
> >    -Ray Gralak
> >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606039648&sdata=aM%2FZfeF17TAQzpkbaUP3fLmHdJnBb6nKO2BIYfJn3Qs%3D&r
> eserved=0>
> >    Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606039648&sdata=tp2vS%2FlsqpS%2B4J18VxFiTkkoDTdTRSS2ucqXyP%2Br%2Bsg%3D&reserved=0>
> >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606049652&sdata=TiIeta1020YGk8DiTDm4Cwtga1Ifo%2BUs6%2B%2BdU%2BuETNQ%3D&r
> eserved=0>
> >
> >
> >    > -----Original Message-----
> >    > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On Behalf
> Of Cheng-Yang Tan via
> > Groups.Io
> >    > Sent: Friday, March 20, 2020 10:55 AM
> >    > Subject: Re: [ap-gto] APCC rate settings
> >    >
> >    > Hi Ray,
> >    >    Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks
> > Mac user :)
> >    > Here's the screen shot for the firewall settings on my Win 10:
> >    >
> >    > Inline image
> >    >
> >    > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it?
> >    >
> >    > cytan
> >    >
> >    >
> >    >
> >    > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote:
> >    >
> >    >
> >    > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked
> > yes to a
> >    > prompt that disabled APCC from being able to access the web. There is not much else that could prevent
> > APCC
> >    > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't
> > updated
> >    > an optional update related to .Net framework.
> >    >
> >    > -Ray Gralak
> >    > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606049652&sdata=Qfzz44eu%2Bsqy7t3zIwvoV%2Ffd%2Fij2fHTbgRzt2ryanJE%3D&r
> eserved=0>
> >    > Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606059657&sdata=1izWYSNBYIO5Yxaud1eZhDelwCeCg8WN2tuvpcp9bqI%3D&reserved=0>
> >    > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606059657&sdata=xUoFELfEqy19cU8i4NJ1h0TBuW5IRqv0%2BJRnuEE4fp0%3D&reserved
> =0>
> >    >
> >    >
> >    > > -----Original Message-----
> >    > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On Behalf
> Of Cheng-Yang Tan via
> > Groups.Io
> >    > > Sent: Friday, March 20, 2020 10:37 AM
> >    > > Subject: Re: [ap-gto] APCC rate settings
> >    > >
> >    > > Hi Ray
> >    > >  I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on
> > Win10?
> >    > >
> >    > > cytan
> >    > >
> >    > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote:
> >    > >
> >    > >
> >    > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your
> > computer.
> >    > >
> >    > > Try turning AV off then try again.
> >    > >
> >    > > -Ray Gralak
> >    > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606069666&sdata=FTZM1Lc%2FB1RIVwozaPxqWiy8aIN%2B675utSAoeMOjN8U%3D
> &reserved=0>
> >    > > Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606069666&sdata=OBvNom9tDLeuraPdX7fp3IBYpYU2lb3CA3G6uBiZCVk%3D&reserved=0>
> >    > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606079671&sdata=6zOWLTccnKDQSYgebTLcV%2FYz51A0Jq2b5%2FPnxmUwxWU%3D&re
> served=0>
> >    > >
> >    > >
> >    > > > -----Original Message-----
> >    > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On
> Behalf Of Cheng-Yang Tan via
> > Groups.Io
> >    > > > Sent: Friday, March 20, 2020 9:45 AM
> >    > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > Subject: Re: [ap-gto] APCC rate settings
> >    > > >
> >    > > > Hi Ray
> >    > > >    I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,>
> <https://www.siriusimaging.com,>
> > <https://www.siriusimaging.com,>
> >    > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the
> >    > > update.
> >    > > >
> >    > > > cytan
> >    > > >
> >    > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote:
> >    > > >
> >    > > >
> >    > > > No connection is required.
> >    > > >
> >    > > > You're computer/browser must be able to access https://www.siriusimaging.com.
> >    > > >
> >    > > > -Ray Gralak
> >    > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606079671&sdata=6WHu4aBMxXmVFe1N1Mu0nh1IDjbOrp3idN2wuQPhIuA%3D&res
> erved=0>
> >    > > > Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606089680&sdata=wB1HeuAfvnYU%2FmZ%2BCedOJ7sZO2e3gBoZTvc3fbORmUU%3D&reserved=0>
> >    > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606089680&sdata=GTbqu1ZEnHo76FVsMV07GTDXNihy0K7Z37zYoxFPYvM%3D&reserved
> =0>
> >    > > >
> >    > > >
> >    > > > > -----Original Message-----
> >    > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On
> Behalf Of Konstantin von
> >    > > > > Sent: Friday, March 20, 2020 8:16 AM
> >    > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > > Subject: Re: [ap-gto] APCC rate settings
> >    > > > >
> >    > > > > Hi Ray,
> >    > > > >
> >    > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are
> > available. Do I
> >    > > have
> >    > > > > to be connected to a mount?
> >    > > > >
> >    > > > > Konstantin
> >    > > > >
> >    > > > >
> >    > > > > Konstantin v. Poschinger
> >    > > > >
> >    > > > > Hammerichstr. 5
> >    > > > > 22605 Hamburg
> >    > > > > 040/8805747
> >    > > > > 0171 1983476
> >    > > > >
> >    > > > >
> >    > > > >    Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>:
> >    > > > >
> >    > > > >    Hi Brian,
> >    > > > >
> >    > > > >    When you run APCC it will indicate a new version is available in the title. Then from APCC's help
> > menu
> >    > > > > you can use Check for updates to get the download link.
> >    > > > >
> >    > > > >    -Ray Gralak
> >    > > > >    Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606099685&sdata=E%2BiQfKM5A8tby1LT8BQ%2BcHCnp5n4TfC2GFQAhQXoUCA%
> 3D&reserved=0>
> >    > > > >    Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606099685&sdata=juuzL1G3w%2Be410opEygk3XmLYTlBeylE2xd%2FSMZWU%2Bw%3D&reserved=0>
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606099685&sdata=juuzL1G3w%2Be410opEygk3XmLYTlBeylE2xd%2FSMZWU%2Bw%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606109694&sdata=qrKU07DMQa7PIF8SHtHDv%2BcnTX7IP%2BEMJMNndwqjelk%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606109694&sdata=qrKU07DMQa7PIF8SHtHDv%2BcnTX7IP%2BEMJMNndwqjelk%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606119704&sdata=HrtaDN9h6ZyZU52BF0qEombtDxcYboCjJ7yYMIT718E%3D&reserved=0> >
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606119704&sdata=HrtaDN9h6ZyZU52BF0qEombtDxcYboCjJ7yYMIT718E%3D&reserved=0> >
> >    > > > >    Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606129713&sdata=Pxri8iOW7HNtxdtQVrIriaIonNzSACZfHdjqF%2BgeKzk%3D&reserved=0>
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >        -----Original Message-----
> >    > > > >        From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io] On
> Behalf Of Brian Valente
> >    > > > >        Sent: Thursday, March 19, 2020 8:39 PM
> >    > > > >        To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > >        Subject: Re: [ap-gto] APCC rate settings
> >    > > > >
> >    > > > >        Ray where can we download this latest version?
> >    > > > >
> >    > > > >        AP site only has link to 1.8.0.5 right now
> >    > > > >
> >    > > > >        thanks -Brian
> >    > > > >
> >    > > > >        On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote:
> >    > > > >
> >    > > > >
> >    > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> > now;
> >    > > > > formerly
> >    > > > >        there
> >    > > > >        > were several more?
> >    > > > >
> >    > > > >        That was fixed in 1.8.0.8/9.
> >    > > > >
> >    > > > >        -Ray Gralak
> >    > > > >        Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
> pro&data=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%
> 7C1%7C0%7C637203560606129713&sdata=CErKXfkGrtk5bCxG0ePWlQONph7%2Bs8cdjeE9mLoGuL8%3D&re
> served=0>
> >    > > > >        Author of PEMPro V3:  https://www.ccdware.com
> %7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C6372
> 03560606139717&sdata=UL5K0xcR4Gy5KPoAZ%2FKacCd5dQbaog8Qk8TlK8GPM3w%3D&reserved=0>
> >    > > > >        Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> a=02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7
> C0%7C637203560606139717&sdata=76a3EFYZecW4WG8jtEeevDMw4ed%2BQvnU3il1JxH0z4c%3D&reserved
> =0>
> >    > > > >
> >    > > > >
> >    > > > >        > -----Original Message-----
> >    > > > >        > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>  [mailto:main@ap-gto.groups.io]
> On Behalf Of Peter Bresler via
> >    > > > > Groups.Io
> >    > > > >        > Sent: Thursday, March 19, 2020 8:11 PM
> >    > > > >        > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io>
> >    > > > >        > Subject: [ap-gto] APCC rate settings
> >    > > > >        >
> >    > > > >        > Running APPC 1.8.0.4  with GTO4 on my Mach1 it appears there are only four rate settings
> > now;
> >    > > > > formerly
> >    > > > >        there
> >    > > > >        > were several more?
> >    > > > >        >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >        --
> >    > > > >
> >    > > > >        Brian
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >        Brian Valente
> >    > > > >        portfolio brianvalentephotography.com <http://brianvalentephotography.com/
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606149722&sdata=q4lkAITUeJaxxigEjjPxe73dg%2B52QFmJJz2p65PnxJM%3D&reserved=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606149722&sdata=q4lkAITUeJaxxigEjjPxe73dg%2B52QFmJJz2p65PnxJM%3D&reserved=0>
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606159727&sdata=6gRCJiJ%2BPEwmHLS3h%2B7LeLwraZPdwAhex1RKPMhdfTg%3D&reserv
> ed=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606159727&sdata=6gRCJiJ%2BPEwmHLS3h%2B7LeLwraZPdwAhex1RKPMhdfTg%3D&reserv
> ed=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606169736&sdata=pSwkYYTzxPzykbZHkcR1VzdoQ587Dh1KWEYr6h0vqjw%3D&reserved=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606169736&sdata=pSwkYYTzxPzykbZHkcR1VzdoQ587Dh1KWEYr6h0vqjw%3D&reserved=0> >
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606179741&sdata=1dXIGVZodSvmeqKWVOKZeGmR%2FW7hKUOm92KtpJ%2B7wQ4%3D&res
> erved=0> > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > > >
> >    > > >
> >    > > >
> >    > > >
> >    > > >
> >    > > >
> >    > > >
> >    > >
> >    > >
> >    > >
> >    > >
> >    > >
> >    > >
> >    >
> >    >
> >    >
> >    >
> >    >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> >
> > Brian
> >
> >
> >
> > Brian Valente
> > portfolio brianvalentephotography.com  <http://brianvalentephotography.com
> 02%7C01%7C%7C09a31d6fc4c94c7ba4ac08d7cd432744%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0
> %7C637203560606179741&sdata=1dXIGVZodSvmeqKWVOKZeGmR%2FW7hKUOm92KtpJ%2B7wQ4%3D&res
> erved=0> >
> >
>
>
>
>
>
>




Re: Official direct links to APCC v1.8.0.8/9 and AP V2 Driver 5.30.09

Stuart <stuart.j.heggie@...>
 

Oops. I should have said: www.apastrosoftware.com is off-line. Not your site Ray.


On Fri, 20 Mar 2020 at 23:43, Stuart via Groups.Io <stuart.j.heggie=gmail.com@groups.io> wrote:
Ray, I think you're website is off-line. Even the main URL fails for me.


On Fri, 20 Mar 2020 at 23:12, Ray Gralak <groups3@...> wrote:
For those who are having trouble with a problem with Check for updates here are the direct links to the downloads:

AP V2 driver 5.30.09:
https://www.gralak.com/apdriver/AstroPhysics_V2_Setup_5.30.09.exe

APCC Standard 1.8.0.8:
https://www.apastrosoftware.com/apcc_download/APCC_Standard_Setup_1.8.0.8.exe

APCC Pro 1.8.0.9:
https://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.8.0.9.exe

APCC Standard PDF:
https://www.apastrosoftware.com/apcc_download/apcc-std.pdf

APCC Pro PDF:
https://www.apastrosoftware.com/apcc_download/apcc-pro.pdf

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver






--

Stuart
http://www.astrofoto.ca/stuartheggie/


--

Stuart
http://www.astrofoto.ca/stuartheggie/


Re: Official direct links to APCC v1.8.0.8/9 and AP V2 Driver 5.30.09

Stuart <stuart.j.heggie@...>
 

Ray, I think you're website is off-line. Even the main URL fails for me.


On Fri, 20 Mar 2020 at 23:12, Ray Gralak <groups3@...> wrote:
For those who are having trouble with a problem with Check for updates here are the direct links to the downloads:

AP V2 driver 5.30.09:
https://www.gralak.com/apdriver/AstroPhysics_V2_Setup_5.30.09.exe

APCC Standard 1.8.0.8:
https://www.apastrosoftware.com/apcc_download/APCC_Standard_Setup_1.8.0.8.exe

APCC Pro 1.8.0.9:
https://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.8.0.9.exe

APCC Standard PDF:
https://www.apastrosoftware.com/apcc_download/apcc-std.pdf

APCC Pro PDF:
https://www.apastrosoftware.com/apcc_download/apcc-pro.pdf

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3:  https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver






--

Stuart
http://www.astrofoto.ca/stuartheggie/


Re: Mach1 Unable to Find Home Position Suddenly

Donald Rudny
 

Hi Ray,

Like I said, I’m not a computer expert, but I was a test engineer, so I know one of the best ways to troubleshoot is to eliminate components out of a system if you can to see how things react. My suggestion in this case is a simple one to try. Mikko thinks it’s his mount. Using Luminous and eliminating his computer and APCC would determine that. If it still has the problem then at least we know it’s not the software or driver. Just trying to help.

Don

Don Rudny

On Mar 20, 2020, at 3:51 PM, Ray Gralak <groups3@gralak.com> wrote:

Hi Don,

I’m not a computer expert and hate Windows, but I understand that a driver can get corrupted. Using Luminous
This is not likely the issue. The driver and associated applications have a digital signature that will detect corruption.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Donald Rudny
Sent: Friday, March 20, 2020 11:30 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Mach1 Unable to Find Home Position Suddenly

Mikko,

I’m not a computer expert and hate Windows, but I understand that a driver can get corrupted. Using Luminous
directly would take the AP V2 driver out of the control system, wouldn’t it? If it’s still off on the park with just
Luminous, then there is a mount or CP problem. If it works ok, then something is amiss in your
computer/driver/APCC. You should be able to initialize with just Luminous. Not sure what park positions it allows
for. SkySafari only allows for Park 4. I think they are working to allow for more.

Don

Don Rudny



On Mar 20, 2020, at 8:10 AM, Mikko Viljamaa <mikko.viljamaa@gmail.com> wrote:



Thanks Don. I have Luminous so I could try that. But... even if I just use the AP V2 driver, unpark the Mount
and slew it to any direction and then ask it to park again, it will miss the park position. Any movement will confuse
it now 9 times out of 10.


- Mikko




Re: RAPAS App

Bill Long
 

That's what I have.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:35 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App
 
The one I have looks like the windows version. I don't think you have the right app.  I have been using it for years and it works very well.

Regards,
Chris

At 03:23 AM 3/21/2020 +0000, you wrote:
That app is not very good, IMHO. The iOS one looks the same as the AP RAPAS Windows app. Would be nice to have the same offering on Android.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:20 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
Look for PolarFinder.  It is NOT a free app though but worth buying.

Regards,
Chris

At 10:11 PM 3/20/2020 -0500, you wrote:
From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.



Thanks,
Charles


Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net


Re: RAPAS App

Christopher Go
 

The one I have looks like the windows version. I don't think you have the right app.  I have been using it for years and it works very well.

Regards,
Chris


At 03:23 AM 3/21/2020 +0000, you wrote:
That app is not very good, IMHO. The iOS one looks the same as the AP RAPAS Windows app. Would be nice to have the same offering on Android.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:20 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] RAPAS App

 
Look for PolarFinder.  It is NOT a free app though but worth buying.

Regards,
Chris

At 10:11 PM 3/20/2020 -0500, you wrote:
From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.



Thanks,
Charles


Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

Christopher and Vicky Go
Christone Industries
Manufacturer and Exporter of Furniture and Home Decor
Cebu, Philippines
http://www.christone.net
astropage: http://astro.christone.net

9341 - 9360 of 78575