|
Re: APCC rate settings
Bill Long
Wait, it was running for a few days... I just reloaded it, and its reporting a new version now.
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Bill Long <bill@...>
Sent: Friday, March 20, 2020 8:21 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] APCC rate settings
Ah then this test would do nothing to help.
My V2 driver is running and did not report the new version on its own. I am on the 5.30.08 build, and your links showed 5.30.09.
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
Sent: Friday, March 20, 2020 8:17 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] APCC rate settings Hi Bill,
> Now run > > pathping siriusimaging.com > > Looks like the last hop that reports ICMP back is the gtt.net network, if you get that far it should work, if not, we'll > know where it failed. The problem is that he can reach siriusimaging from his browser. Someone privately emailed me that it works on one of his computers but not another. It's very odd. -Ray Gralak Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370821545&sdata=Moj3KsRhCDBlqgnP9yoWvptHc%2BxCGnFLHw26tWGttYg%3D&reserved=0 Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370821545&sdata=0INmBIufFqtF1%2FoGoWpqZ0ZWcj93%2BLmIOrGaBpVM2a8%3D&reserved=0 Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370821545&sdata=WytlYc5b8Xsa5hYVuhqHOCD4Am%2BNl7W%2BzWUya4Rnj%2B4%3D&reserved=0 > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Bill Long > Sent: Friday, March 20, 2020 8:13 PM > To: main@ap-gto.groups.io > Subject: Re: [ap-gto] APCC rate settings > > Now run > > pathping siriusimaging.com > > Looks like the last hop that reports ICMP back is the gtt.net network, if you get that far it should work, if not, we'll > know where it failed. > > Send that to Ray directly though, not here. > > > ________________________________ > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io > <cytan299@...> > Sent: Friday, March 20, 2020 8:01 PM > To: main@ap-gto.groups.io <main@ap-gto.groups.io> > Subject: Re: [ap-gto] APCC rate settings > > I just sent the info to Ray. > > cytan > > On Friday, March 20, 2020, 09:56:54 PM CDT, Bill Long <bill@...> wrote: > > > Open CMD.exe and run this: > > ipconfig /all > > Then paste in the results into an email to Ray directly. > > ________________________________ > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io > <cytan299@...> > Sent: Friday, March 20, 2020 7:54 PM > To: main@ap-gto.groups.io <main@ap-gto.groups.io> > Subject: Re: [ap-gto] APCC rate settings > > Hi Ray, > You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it > explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6. > > Windows10 is at latest service pack and everything is up to date. > > cytan > > On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote: > > > Brian and cytan, > > 1. I am wondering if you have IPV4 enabled on your LAN port? > > 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework? > > -Ray Gralak > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=uAoiHflzmxduNabuAjVYBxILaxqGfHtKO%2FqiT0YpmUQ%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946443916&sdata=JG2zhwodOC0IQAfikoMpJjKw5UKsvawfCQcjnMn3IN4%3D&rese > rved=0> > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=miAqOB0xx%2BwdtFuf8QLJTZVlb80dv1SRcvQPvkYvsHc%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946453921&sdata=pDGZ79LY5uf%2Fh6JYt4QFG%2FOjdqqD1NqwaxMBltrmVow%3D&reserved=0> > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=TCxB84u39VMbN3sS1hk1%2Bt9Ns98vLSu2dndtLh1meB8%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946463933&sdata=iW1AsIsea78e04AFyW4yK9uhdf%2FNQ06YONSY6B4HmDg%3D&reserv > ed=0> > > > > -----Original Message----- > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On Behalf Of > Brian Valente > > Sent: Friday, March 20, 2020 7:27 PM > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > Subject: Re: [ap-gto] APCC rate settings > > > > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here > > > > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299@...> wrote: > > > > > > Hi Ray, > > I added APCC to the firewall but the problem remains: > > Inline image > > > > cytan > > > > > > > > On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > > > AstroPhysicsCommandCenter.exe > > > > -Ray Gralak > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=uAoiHflzmxduNabuAjVYBxILaxqGfHtKO%2FqiT0YpmUQ%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946473944&sdata=HKtKY0wpWfCyPMYd8yTNoHSEjtPfaplpcQE3LEyjH0c%3D&res > erved=0> > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=miAqOB0xx%2BwdtFuf8QLJTZVlb80dv1SRcvQPvkYvsHc%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946483950&sdata=7Wefo8td5u6xhB6eOSHyfl6A2i8RexlE8Tk6K9WL3dc%3D&reserved=0> > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=TCxB84u39VMbN3sS1hk1%2Bt9Ns98vLSu2dndtLh1meB8%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946503967&sdata=G1oo%2F0VKGZN8jhy34A25sCvnYZW7grDCdk9fHyzHiBE%3D&reserve > d=0> > > > > > > > -----Original Message----- > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On Behalf > Of Cheng-Yang Tan via > > Groups.Io > > > Sent: Friday, March 20, 2020 10:55 AM > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > Hi Ray, > > > Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks > > Mac user :) > > > Here's the screen shot for the firewall settings on my Win 10: > > > > > > Inline image > > > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > > > > > cytan > > > > > > > > > > > > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked > > yes to a > > > prompt that disabled APCC from being able to access the web. There is not much else that could prevent > > APCC > > > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't > > updated > > > an optional update related to .Net framework. > > > > > > -Ray Gralak > > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=uAoiHflzmxduNabuAjVYBxILaxqGfHtKO%2FqiT0YpmUQ%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946513978&sdata=TrwY72ZTfKTmNPWF6f%2B%2BQeEHAsQ8s0d9jWGHidHnyUM > %3D&reserved=0> > > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=IrCjCzWVI5TEc0nUJM3Zo0vXemb9ohzdn5KmFYPxKBQ%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946523984&sdata=n9v7YkWti0x52cUz7cHjVO2GjfnqgrCCPY3srYiI1yg%3D&reserved=0> > > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=qp64sYFESMDEuZy%2B35%2FEmhGagMb0ZmC7sSiziyjy9f0%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946533989&sdata=yn0wnJTF1q96uY6euf8vl7XlkHCJUohYkLEotsSWHSY%3D&reserved=0> > > > > > > > > > > -----Original Message----- > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On Behalf > Of Cheng-Yang Tan via > > Groups.Io > > > > Sent: Friday, March 20, 2020 10:37 AM > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > Hi Ray > > > > I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on > > Win10? > > > > > > > > cytan > > > > > > > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your > > computer. > > > > > > > > Try turning AV off then try again. > > > > > > > > -Ray Gralak > > > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=VEsFiI6bBV9oQ5B28L%2FQke6DrkSexC1G4OvKn70GJBY%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946544001&sdata=4guP2W6xJ%2Bmssp4RRFjzrAYBke%2FOj%2F8f6pwm25v6fjM > %3D&reserved=0> > > > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=IrCjCzWVI5TEc0nUJM3Zo0vXemb9ohzdn5KmFYPxKBQ%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946554006&sdata=Z4jf9Xki4kco1smOTH29YJUj4FoP0TuWPsKmIqIAqug%3D&reserved=0> > > > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=qp64sYFESMDEuZy%2B35%2FEmhGagMb0ZmC7sSiziyjy9f0%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946564018&sdata=84naeejmcW1S7xNlu%2BM2PfY56IVzRfGXW8JR5YHlpQ4%3D&reserved > =0> > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On > Behalf Of Cheng-Yang Tan via > > Groups.Io > > > > > Sent: Friday, March 20, 2020 9:45 AM > > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Hi Ray > > > > > I can see https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=Yk2sayMDJN%2BQMmsWVlbpnaK67L9%2BYT2yXgplyakgFFo%3D&reserved=0, <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=Yk2sayMDJN%2BQMmsWVlbpnaK67L9%2BYT2yXgplyakgFFo%3D&reserved=0,> > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=tzLQTsQEXvQSsCAmseG5RqPIFfxZ91O38%2FpV%2FY6d6as%3D&reserved=0,> > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=tzLQTsQEXvQSsCAmseG5RqPIFfxZ91O38%2FpV%2FY6d6as%3D&reserved=0,> > > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=tzLQTsQEXvQSsCAmseG5RqPIFfxZ91O38%2FpV%2FY6d6as%3D&reserved=0,> but 1.8.0.4 does not see the > > > > update. > > > > > > > > > > cytan > > > > > > > > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > > > > No connection is required. > > > > > > > > > > You're computer/browser must be able to access https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=tzLQTsQEXvQSsCAmseG5RqPIFfxZ91O38%2FpV%2FY6d6as%3D&reserved=0. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=m3xB%2BeNOswO9Zvq5%2FC9RfI0rzfzBsbureE5%2BlR0kwiA%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946574030&sdata=pYFoLVFVQ%2BZFpLOZZHXorTjksso%2BnW%2F7pQgrrtmi390 > %3D&reserved=0> > > > > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=6KmA4XPeV20dGivUjKzznba9m4kbRigK90PGQbCBkME%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946584035&sdata=PRNj930ZrPQ1hQ1Km3co2Gp%2B5CUbGFo%2FEMCR5O4jqqY%3D&reserved=0> > > > > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=NR1lH9FJj1qRNroJfJ5ialgRJXESE61ixiudt4BtWAE%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946594047&sdata=tO2lkjViN4ojYV68nvNjAt12P%2FzmJm9bcZ%2FppbN5%2B5A%3D&reser > ved=0> > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On > Behalf Of Konstantin von > > > > > > Sent: Friday, March 20, 2020 8:16 AM > > > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > > > Hi Ray, > > > > > > > > > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are > > available. Do I > > > > have > > > > > > to be connected to a mount? > > > > > > > > > > > > Konstantin > > > > > > > > > > > > > > > > > > Konstantin v. Poschinger > > > > > > > > > > > > Hammerichstr. 5 > > > > > > 22605 Hamburg > > > > > > 040/8805747 > > > > > > 0171 1983476 > > > > > > > > > > > > > > > > > > Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>: > > > > > > > > > > > > Hi Brian, > > > > > > > > > > > > When you run APCC it will indicate a new version is available in the title. Then from APCC's help > > menu > > > > > > you can use Check for updates to get the download link. > > > > > > > > > > > > -Ray Gralak > > > > > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=m3xB%2BeNOswO9Zvq5%2FC9RfI0rzfzBsbureE5%2BlR0kwiA%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946604052&sdata=F%2F%2F4QFvANMUOD1G216gmF4DX6E%2FBGjEA9C715mi > %2B1C4%3D&reserved=0> > > > > > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=iqqu9lx7QjR6JtT%2FV7bk3y9uOk4h27jHTLsK2z%2BfaCo%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946614058&sdata=SSe9Jb5ph1eBCCdd8YMnJWtDhoa1pJhg5xm3yBhtKys%3D&reserved=0> > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=iqqu9lx7QjR6JtT%2FV7bk3y9uOk4h27jHTLsK2z%2BfaCo%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946624069&sdata=nzHx4q8ylKPHZE1v8mb7qLWvQc40ZEZ3nKP1lByO%2F24%3D&reserved=0> > > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=iqqu9lx7QjR6JtT%2FV7bk3y9uOk4h27jHTLsK2z%2BfaCo%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946634081&sdata=51LTC7nrix6LeSskd0RawTG6zgWXWcbio%2BntJm4vAQY%3D&reserved=0> > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=iqqu9lx7QjR6JtT%2FV7bk3y9uOk4h27jHTLsK2z%2BfaCo%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946644086&sdata=xodJFZfrBrDb3q5KJnapd2HXY16E%2Fttt4eDehQdFZyM%3D&reserved=0> > > > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=iqqu9lx7QjR6JtT%2FV7bk3y9uOk4h27jHTLsK2z%2BfaCo%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946654092&sdata=Wk3K6oLajcqY6S89vMA%2BnA8HrMSbhlXZy2SkBtI1j88%3D&reserved=0> > > > > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=IswdzLdVqv7aVxCvXAlrqmiI5g8S1cX1%2F7Z%2FRh%2FAsVA%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946664103&sdata=5hGcGPyJin3I4HtAzgcxaKrbTW0YNocjOtitMuyrX0A%3D&reserved=0> > > > > > > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=aWXJNP2X51AWLo%2B1k3I81lvFNC0bXGYwiNRHVFDlras%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946674121&sdata=LDK6YIMUAFF%2Fo9rYIDRABqKuDSxrdb66HgEY0ICwSnM%3D&reserv > ed=0> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On > Behalf Of Brian Valente > > > > > > Sent: Thursday, March 19, 2020 8:39 PM > > > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > > > Ray where can we download this latest version? > > > > > > > > > > > > AP site only has link to 1.8.0.5 right now > > > > > > > > > > > > thanks -Brian > > > > > > > > > > > > On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > > now; > > > > > > formerly > > > > > > there > > > > > > > were several more? > > > > > > > > > > > > That was fixed in 1.8.0.8/9. > > > > > > > > > > > > -Ray Gralak > > > > > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=hWiZWr5bjCKKLVD7FdE5cGdF8dPPoxBdUqEue9DaEVI%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946684126&sdata=uV0AaS0WPqx2aPTySVt%2FZmVulaOpIDUPKuHgks1SXoY%3 > D&reserved=0> > > > > > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=7%2BosOx3JUk4AuQtOiYb8Gd9%2Bk%2BX8w4fEaVFaXIlesw8%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946694126&sdata=9AvMlYDR%2FwDjVcB12k%2B3CWE31lf840eIpt2JlCtt%2BzU%3D&reserved=0> > > > > > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=x9OOx4o94WWkHV%2FnmWVGAWDoxmOI429x5MLGnZu6HMk%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946704143&sdata=kqaXYDfDm%2FEeWJLzahwksTuHZthPamMg%2F%2BA0utjEGdI%3D&r > eserved=0> > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] > On Behalf Of Peter Bresler via > > > > > > Groups.Io > > > > > > > Sent: Thursday, March 19, 2020 8:11 PM > > > > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > > > > > Subject: [ap-gto] APCC rate settings > > > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > > now; > > > > > > formerly > > > > > > there > > > > > > > were several more? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > Brian > > > > > > > > > > > > > > > > > > > > > > > > Brian Valente > > > > > > portfolio brianvalentephotography.com <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=8Ju%2BHKZY5YwjhZhqIjDSyxeU46BAj4vqplb6Rofg%2Fdc%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946714143&sdata=loLsb3GDBqEetEQFBMKrUqoOXISrp4Gz2GCXWTQ%2B%2B6s%3D&reserv > ed=0> > > > > > > > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=WvgbHQaRRwOreT8wk4RYL4MfwGEauS7SJSxuZBb%2FEe0%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946724154&sdata=Sy62EviTVH2YnM%2FhWLx4SvQ%2FtPWPGK3YE5r%2FLuXu7ho%3D&re > served=0> <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=WvgbHQaRRwOreT8wk4RYL4MfwGEauS7SJSxuZBb%2FEe0%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946734160&sdata=oC9aX5%2BOb%2FI%2B8BWbiqk97pkG58ph1zYfpHia4Srz6%2BA%3D&res > erved=0> > > > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=WvgbHQaRRwOreT8wk4RYL4MfwGEauS7SJSxuZBb%2FEe0%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946744171&sdata=i%2FJ1mwsXu1IfmqiRwEyqaCYoth26rYURB6Q6a3%2BOJAg%3D&reserved > =0> > > > > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370881594&sdata=YikLbcSjS3QSnGQwixlXDk30Ulutp%2BF5QkLk5xsvCHk%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946754177&sdata=wV7jpb%2FDVikc5YMZjhx4Wg06GxAOrVMVyOIsnzXC1S8%3D&reserved=0 > > > > > > > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370881594&sdata=YikLbcSjS3QSnGQwixlXDk30Ulutp%2BF5QkLk5xsvCHk%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946764188&sdata=rbxVDMnrnrSCCJmsm57hjXbM948Q%2FPswHZtnxXM0uzs%3D&reserved= > 0> > > > > > > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370881594&sdata=hMMh2LQz6MGJFVhnhQlh5Ip7xoUt53tuQBImaFEnGNI%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946774206&sdata=ShAq42ga%2BQpO2giGSYV02IZ7NJtqr9mApGbdkuxZ%2BgY%3D&reserved > =0> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > Brian > > > > > > > > Brian Valente > > portfolio brianvalentephotography.com <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370881594&sdata=YikLbcSjS3QSnGQwixlXDk30Ulutp%2BF5QkLk5xsvCHk%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946784205&sdata=jVOqkA7gcrnHD325IKUAML%2FpyOJf6vSPJ2vSqCY0w4A%3D&reserved=0 > > > > > > > > > > >
|
|
|
|
Re: RAPAS App
Bill Long
That app is not very good, IMHO. The iOS one looks the same as the AP RAPAS Windows app. Would be nice to have the same offering on Android.
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Christopher Go <chris@...>
Sent: Friday, March 20, 2020 8:20 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] RAPAS App Look for PolarFinder. It is NOT a free app though but worth buying.
Regards, Chris At 10:11 PM 3/20/2020 -0500, you wrote: From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.
|
|
|
|
Re: APCC rate settings
Bill Long
Ah then this test would do nothing to help.
My V2 driver is running and did not report the new version on its own. I am on the 5.30.08 build, and your links showed 5.30.09.
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Ray Gralak <groups3@...>
Sent: Friday, March 20, 2020 8:17 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] APCC rate settings Hi Bill,
> Now run > > pathping siriusimaging.com > > Looks like the last hop that reports ICMP back is the gtt.net network, if you get that far it should work, if not, we'll > know where it failed. The problem is that he can reach siriusimaging from his browser. Someone privately emailed me that it works on one of his computers but not another. It's very odd. -Ray Gralak Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370821545&sdata=Moj3KsRhCDBlqgnP9yoWvptHc%2BxCGnFLHw26tWGttYg%3D&reserved=0 Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370821545&sdata=0INmBIufFqtF1%2FoGoWpqZ0ZWcj93%2BLmIOrGaBpVM2a8%3D&reserved=0 Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370821545&sdata=WytlYc5b8Xsa5hYVuhqHOCD4Am%2BNl7W%2BzWUya4Rnj%2B4%3D&reserved=0 > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Bill Long > Sent: Friday, March 20, 2020 8:13 PM > To: main@ap-gto.groups.io > Subject: Re: [ap-gto] APCC rate settings > > Now run > > pathping siriusimaging.com > > Looks like the last hop that reports ICMP back is the gtt.net network, if you get that far it should work, if not, we'll > know where it failed. > > Send that to Ray directly though, not here. > > > ________________________________ > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io > <cytan299@...> > Sent: Friday, March 20, 2020 8:01 PM > To: main@ap-gto.groups.io <main@ap-gto.groups.io> > Subject: Re: [ap-gto] APCC rate settings > > I just sent the info to Ray. > > cytan > > On Friday, March 20, 2020, 09:56:54 PM CDT, Bill Long <bill@...> wrote: > > > Open CMD.exe and run this: > > ipconfig /all > > Then paste in the results into an email to Ray directly. > > ________________________________ > > From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io > <cytan299@...> > Sent: Friday, March 20, 2020 7:54 PM > To: main@ap-gto.groups.io <main@ap-gto.groups.io> > Subject: Re: [ap-gto] APCC rate settings > > Hi Ray, > You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it > explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6. > > Windows10 is at latest service pack and everything is up to date. > > cytan > > On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote: > > > Brian and cytan, > > 1. I am wondering if you have IPV4 enabled on your LAN port? > > 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework? > > -Ray Gralak > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=uAoiHflzmxduNabuAjVYBxILaxqGfHtKO%2FqiT0YpmUQ%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946443916&sdata=JG2zhwodOC0IQAfikoMpJjKw5UKsvawfCQcjnMn3IN4%3D&rese > rved=0> > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=miAqOB0xx%2BwdtFuf8QLJTZVlb80dv1SRcvQPvkYvsHc%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946453921&sdata=pDGZ79LY5uf%2Fh6JYt4QFG%2FOjdqqD1NqwaxMBltrmVow%3D&reserved=0> > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=TCxB84u39VMbN3sS1hk1%2Bt9Ns98vLSu2dndtLh1meB8%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946463933&sdata=iW1AsIsea78e04AFyW4yK9uhdf%2FNQ06YONSY6B4HmDg%3D&reserv > ed=0> > > > > -----Original Message----- > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On Behalf Of > Brian Valente > > Sent: Friday, March 20, 2020 7:27 PM > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > Subject: Re: [ap-gto] APCC rate settings > > > > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here > > > > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299@...> wrote: > > > > > > Hi Ray, > > I added APCC to the firewall but the problem remains: > > Inline image > > > > cytan > > > > > > > > On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > > > AstroPhysicsCommandCenter.exe > > > > -Ray Gralak > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=uAoiHflzmxduNabuAjVYBxILaxqGfHtKO%2FqiT0YpmUQ%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946473944&sdata=HKtKY0wpWfCyPMYd8yTNoHSEjtPfaplpcQE3LEyjH0c%3D&res > erved=0> > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=miAqOB0xx%2BwdtFuf8QLJTZVlb80dv1SRcvQPvkYvsHc%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946483950&sdata=7Wefo8td5u6xhB6eOSHyfl6A2i8RexlE8Tk6K9WL3dc%3D&reserved=0> > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=TCxB84u39VMbN3sS1hk1%2Bt9Ns98vLSu2dndtLh1meB8%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946503967&sdata=G1oo%2F0VKGZN8jhy34A25sCvnYZW7grDCdk9fHyzHiBE%3D&reserve > d=0> > > > > > > > -----Original Message----- > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On Behalf > Of Cheng-Yang Tan via > > Groups.Io > > > Sent: Friday, March 20, 2020 10:55 AM > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > Hi Ray, > > > Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks > > Mac user :) > > > Here's the screen shot for the firewall settings on my Win 10: > > > > > > Inline image > > > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > > > > > cytan > > > > > > > > > > > > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked > > yes to a > > > prompt that disabled APCC from being able to access the web. There is not much else that could prevent > > APCC > > > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't > > updated > > > an optional update related to .Net framework. > > > > > > -Ray Gralak > > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370831550&sdata=uAoiHflzmxduNabuAjVYBxILaxqGfHtKO%2FqiT0YpmUQ%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946513978&sdata=TrwY72ZTfKTmNPWF6f%2B%2BQeEHAsQ8s0d9jWGHidHnyUM > %3D&reserved=0> > > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=IrCjCzWVI5TEc0nUJM3Zo0vXemb9ohzdn5KmFYPxKBQ%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946523984&sdata=n9v7YkWti0x52cUz7cHjVO2GjfnqgrCCPY3srYiI1yg%3D&reserved=0> > > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=qp64sYFESMDEuZy%2B35%2FEmhGagMb0ZmC7sSiziyjy9f0%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946533989&sdata=yn0wnJTF1q96uY6euf8vl7XlkHCJUohYkLEotsSWHSY%3D&reserved=0> > > > > > > > > > > -----Original Message----- > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On Behalf > Of Cheng-Yang Tan via > > Groups.Io > > > > Sent: Friday, March 20, 2020 10:37 AM > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > Hi Ray > > > > I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on > > Win10? > > > > > > > > cytan > > > > > > > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your > > computer. > > > > > > > > Try turning AV off then try again. > > > > > > > > -Ray Gralak > > > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=VEsFiI6bBV9oQ5B28L%2FQke6DrkSexC1G4OvKn70GJBY%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946544001&sdata=4guP2W6xJ%2Bmssp4RRFjzrAYBke%2FOj%2F8f6pwm25v6fjM > %3D&reserved=0> > > > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=IrCjCzWVI5TEc0nUJM3Zo0vXemb9ohzdn5KmFYPxKBQ%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946554006&sdata=Z4jf9Xki4kco1smOTH29YJUj4FoP0TuWPsKmIqIAqug%3D&reserved=0> > > > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=qp64sYFESMDEuZy%2B35%2FEmhGagMb0ZmC7sSiziyjy9f0%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946564018&sdata=84naeejmcW1S7xNlu%2BM2PfY56IVzRfGXW8JR5YHlpQ4%3D&reserved > =0> > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On > Behalf Of Cheng-Yang Tan via > > Groups.Io > > > > > Sent: Friday, March 20, 2020 9:45 AM > > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Hi Ray > > > > > I can see https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=Yk2sayMDJN%2BQMmsWVlbpnaK67L9%2BYT2yXgplyakgFFo%3D&reserved=0, <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370841561&sdata=Yk2sayMDJN%2BQMmsWVlbpnaK67L9%2BYT2yXgplyakgFFo%3D&reserved=0,> > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=tzLQTsQEXvQSsCAmseG5RqPIFfxZ91O38%2FpV%2FY6d6as%3D&reserved=0,> > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=tzLQTsQEXvQSsCAmseG5RqPIFfxZ91O38%2FpV%2FY6d6as%3D&reserved=0,> > > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=tzLQTsQEXvQSsCAmseG5RqPIFfxZ91O38%2FpV%2FY6d6as%3D&reserved=0,> but 1.8.0.4 does not see the > > > > update. > > > > > > > > > > cytan > > > > > > > > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > > > > No connection is required. > > > > > > > > > > You're computer/browser must be able to access https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=tzLQTsQEXvQSsCAmseG5RqPIFfxZ91O38%2FpV%2FY6d6as%3D&reserved=0. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=m3xB%2BeNOswO9Zvq5%2FC9RfI0rzfzBsbureE5%2BlR0kwiA%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946574030&sdata=pYFoLVFVQ%2BZFpLOZZHXorTjksso%2BnW%2F7pQgrrtmi390 > %3D&reserved=0> > > > > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=6KmA4XPeV20dGivUjKzznba9m4kbRigK90PGQbCBkME%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946584035&sdata=PRNj930ZrPQ1hQ1Km3co2Gp%2B5CUbGFo%2FEMCR5O4jqqY%3D&reserved=0> > > > > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=NR1lH9FJj1qRNroJfJ5ialgRJXESE61ixiudt4BtWAE%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946594047&sdata=tO2lkjViN4ojYV68nvNjAt12P%2FzmJm9bcZ%2FppbN5%2B5A%3D&reser > ved=0> > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On > Behalf Of Konstantin von > > > > > > Sent: Friday, March 20, 2020 8:16 AM > > > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > > > Hi Ray, > > > > > > > > > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are > > available. Do I > > > > have > > > > > > to be connected to a mount? > > > > > > > > > > > > Konstantin > > > > > > > > > > > > > > > > > > Konstantin v. Poschinger > > > > > > > > > > > > Hammerichstr. 5 > > > > > > 22605 Hamburg > > > > > > 040/8805747 > > > > > > 0171 1983476 > > > > > > > > > > > > > > > > > > Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>: > > > > > > > > > > > > Hi Brian, > > > > > > > > > > > > When you run APCC it will indicate a new version is available in the title. Then from APCC's help > > menu > > > > > > you can use Check for updates to get the download link. > > > > > > > > > > > > -Ray Gralak > > > > > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370851572&sdata=m3xB%2BeNOswO9Zvq5%2FC9RfI0rzfzBsbureE5%2BlR0kwiA%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946604052&sdata=F%2F%2F4QFvANMUOD1G216gmF4DX6E%2FBGjEA9C715mi > %2B1C4%3D&reserved=0> > > > > > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=iqqu9lx7QjR6JtT%2FV7bk3y9uOk4h27jHTLsK2z%2BfaCo%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946614058&sdata=SSe9Jb5ph1eBCCdd8YMnJWtDhoa1pJhg5xm3yBhtKys%3D&reserved=0> > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=iqqu9lx7QjR6JtT%2FV7bk3y9uOk4h27jHTLsK2z%2BfaCo%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946624069&sdata=nzHx4q8ylKPHZE1v8mb7qLWvQc40ZEZ3nKP1lByO%2F24%3D&reserved=0> > > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=iqqu9lx7QjR6JtT%2FV7bk3y9uOk4h27jHTLsK2z%2BfaCo%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946634081&sdata=51LTC7nrix6LeSskd0RawTG6zgWXWcbio%2BntJm4vAQY%3D&reserved=0> > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=iqqu9lx7QjR6JtT%2FV7bk3y9uOk4h27jHTLsK2z%2BfaCo%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946644086&sdata=xodJFZfrBrDb3q5KJnapd2HXY16E%2Fttt4eDehQdFZyM%3D&reserved=0> > > > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=iqqu9lx7QjR6JtT%2FV7bk3y9uOk4h27jHTLsK2z%2BfaCo%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946654092&sdata=Wk3K6oLajcqY6S89vMA%2BnA8HrMSbhlXZy2SkBtI1j88%3D&reserved=0> > > > > > <https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=IswdzLdVqv7aVxCvXAlrqmiI5g8S1cX1%2F7Z%2FRh%2FAsVA%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946664103&sdata=5hGcGPyJin3I4HtAzgcxaKrbTW0YNocjOtitMuyrX0A%3D&reserved=0> > > > > > > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370861577&sdata=aWXJNP2X51AWLo%2B1k3I81lvFNC0bXGYwiNRHVFDlras%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946674121&sdata=LDK6YIMUAFF%2Fo9rYIDRABqKuDSxrdb66HgEY0ICwSnM%3D&reserv > ed=0> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] On > Behalf Of Brian Valente > > > > > > Sent: Thursday, March 19, 2020 8:39 PM > > > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > > > Ray where can we download this latest version? > > > > > > > > > > > > AP site only has link to 1.8.0.5 right now > > > > > > > > > > > > thanks -Brian > > > > > > > > > > > > On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > > now; > > > > > > formerly > > > > > > there > > > > > > > were several more? > > > > > > > > > > > > That was fixed in 1.8.0.8/9. > > > > > > > > > > > > -Ray Gralak > > > > > > Author of APCC (Astro-Physics Command Center): https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc-pro&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=hWiZWr5bjCKKLVD7FdE5cGdF8dPPoxBdUqEue9DaEVI%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.astro-physics.com%2Fapcc- > pro&data=02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa > %7C1%7C0%7C637203564946684126&sdata=uV0AaS0WPqx2aPTySVt%2FZmVulaOpIDUPKuHgks1SXoY%3 > D&reserved=0> > > > > > > Author of PEMPro V3: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=7%2BosOx3JUk4AuQtOiYb8Gd9%2Bk%2BX8w4fEaVFaXIlesw8%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.ccdware.com%2F&data=02%7C01% > 7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C63720 > 3564946694126&sdata=9AvMlYDR%2FwDjVcB12k%2B3CWE31lf840eIpt2JlCtt%2BzU%3D&reserved=0> > > > > > > Author of Astro-Physics V2 ASCOM Driver: https://eur02.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=x9OOx4o94WWkHV%2FnmWVGAWDoxmOI429x5MLGnZu6HMk%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.siriusimaging.com%2Fapdriver&data > =02%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7 > C0%7C637203564946704143&sdata=kqaXYDfDm%2FEeWJLzahwksTuHZthPamMg%2F%2BA0utjEGdI%3D&r > eserved=0> > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> [mailto:main@ap-gto.groups.io] > On Behalf Of Peter Bresler via > > > > > > Groups.Io > > > > > > > Sent: Thursday, March 19, 2020 8:11 PM > > > > > > > To: main@ap-gto.groups.io <mailto:main@ap-gto.groups.io> > > > > > > > Subject: [ap-gto] APCC rate settings > > > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > > now; > > > > > > formerly > > > > > > there > > > > > > > were several more? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > Brian > > > > > > > > > > > > > > > > > > > > > > > > Brian Valente > > > > > > portfolio brianvalentephotography.com <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=8Ju%2BHKZY5YwjhZhqIjDSyxeU46BAj4vqplb6Rofg%2Fdc%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946714143&sdata=loLsb3GDBqEetEQFBMKrUqoOXISrp4Gz2GCXWTQ%2B%2B6s%3D&reserv > ed=0> > > > > > > > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=WvgbHQaRRwOreT8wk4RYL4MfwGEauS7SJSxuZBb%2FEe0%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946724154&sdata=Sy62EviTVH2YnM%2FhWLx4SvQ%2FtPWPGK3YE5r%2FLuXu7ho%3D&re > served=0> <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=WvgbHQaRRwOreT8wk4RYL4MfwGEauS7SJSxuZBb%2FEe0%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946734160&sdata=oC9aX5%2BOb%2FI%2B8BWbiqk97pkG58ph1zYfpHia4Srz6%2BA%3D&res > erved=0> > > > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370871582&sdata=WvgbHQaRRwOreT8wk4RYL4MfwGEauS7SJSxuZBb%2FEe0%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946744171&sdata=i%2FJ1mwsXu1IfmqiRwEyqaCYoth26rYURB6Q6a3%2BOJAg%3D&reserved > =0> > > > > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370881594&sdata=YikLbcSjS3QSnGQwixlXDk30Ulutp%2BF5QkLk5xsvCHk%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946754177&sdata=wV7jpb%2FDVikc5YMZjhx4Wg06GxAOrVMVyOIsnzXC1S8%3D&reserved=0 > > > > > > > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370881594&sdata=YikLbcSjS3QSnGQwixlXDk30Ulutp%2BF5QkLk5xsvCHk%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946764188&sdata=rbxVDMnrnrSCCJmsm57hjXbM948Q%2FPswHZtnxXM0uzs%3D&reserved= > 0> > > > > > > <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370881594&sdata=hMMh2LQz6MGJFVhnhQlh5Ip7xoUt53tuQBImaFEnGNI%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946774206&sdata=ShAq42ga%2BQpO2giGSYV02IZ7NJtqr9mApGbdkuxZ%2BgY%3D&reserved > =0> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > Brian > > > > > > > > Brian Valente > > portfolio brianvalentephotography.com <https://eur02.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com&data=02%7C01%7C%7Cff319eae5d85498ff9ac08d7cd465b79%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637203574370881594&sdata=YikLbcSjS3QSnGQwixlXDk30Ulutp%2BF5QkLk5xsvCHk%3D&reserved=0 > <https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fbrianvalentephotography.com%2F&data=0 > 2%7C01%7C%7Cbc86cf33a4d34e4abbe108d7cd442982%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0 > %7C637203564946784205&sdata=jVOqkA7gcrnHD325IKUAML%2FpyOJf6vSPJ2vSqCY0w4A%3D&reserved=0 > > > > > > > > > > >
|
|
|
|
Re: RAPAS App
Christopher Go
Look for PolarFinder. It is NOT a free app though but
worth buying.
toggle quoted messageShow quoted text
Regards, Chris
At 10:11 PM 3/20/2020 -0500, you wrote: From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated.
|
|
|
|
Re: Official direct links to APCC v1.8.0.8/9 and AP V2 Driver 5.30.09
PS that was just clicking on the links you provided above - the pro version and pro PDF
On Fri, Mar 20, 2020 at 8:12 PM Ray Gralak <groups3@...> wrote: For those who are having trouble with a problem with Check for updates here are the direct links to the downloads: --
|
|
|
|
Re: Official direct links to APCC v1.8.0.8/9 and AP V2 Driver 5.30.09
hmm - well this is interesting. this is from a different computer and network than my previous one: 
On Fri, Mar 20, 2020 at 8:12 PM Ray Gralak <groups3@...> wrote: For those who are having trouble with a problem with Check for updates here are the direct links to the downloads: --
|
|
|
|
Re: APCC rate settings
Ray Gralak
Hi Bill,
Now runThe problem is that he can reach siriusimaging from his browser. Someone privately emailed me that it works on one of his computers but not another. It's very odd. -Ray Gralak Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver -----Original Message-----
|
|
|
|
Re: APCC rate settings
Bill Long
Now run
pathping siriusimaging.com
Looks like the last hop that reports ICMP back is the gtt.net network, if you get that far it should work, if not, we'll know where it failed.
Send that to Ray directly though, not here.
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io <cytan299@...>
Sent: Friday, March 20, 2020 8:01 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] APCC rate settings I just sent the info to Ray.
cytan
On Friday, March 20, 2020, 09:56:54 PM CDT, Bill Long <bill@...> wrote:
Open CMD.exe and run this:
ipconfig /all
Then paste in the results into an email to Ray directly.
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io <cytan299@...>
Sent: Friday, March 20, 2020 7:54 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] APCC rate settings Hi Ray,
You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.
Windows10 is at latest service pack and everything is up to date.
cytan
On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:
Brian and cytan,
1. I am wondering if you have IPV4 enabled on your LAN port? 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework? -Ray Gralak Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente > Sent: Friday, March 20, 2020 7:27 PM > To: main@ap-gto.groups.io > Subject: Re: [ap-gto] APCC rate settings > > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here > > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote: > > > Hi Ray, > I added APCC to the firewall but the problem remains: > Inline image > > cytan > > > > On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote: > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > AstroPhysicsCommandCenter.exe > > -Ray Gralak > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > Author of PEMPro V3: https://www.ccdware.com > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > -----Original Message----- > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > Sent: Friday, March 20, 2020 10:55 AM > > To: main@ap-gto.groups.io > > Subject: Re: [ap-gto] APCC rate settings > > > > Hi Ray, > > Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks > Mac user :) > > Here's the screen shot for the firewall settings on my Win 10: > > > > Inline image > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > > > cytan > > > > > > > > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked > yes to a > > prompt that disabled APCC from being able to access the web. There is not much else that could prevent > APCC > > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't > updated > > an optional update related to .Net framework. > > > > -Ray Gralak > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > Author of PEMPro V3: https://www.ccdware.com > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > -----Original Message----- > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > > Sent: Friday, March 20, 2020 10:37 AM > > > To: main@ap-gto.groups.io > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > Hi Ray > > > I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on > Win10? > > > > > > cytan > > > > > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your > computer. > > > > > > Try turning AV off then try again. > > > > > > -Ray Gralak > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > Author of PEMPro V3: https://www.ccdware.com > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > -----Original Message----- > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > > > Sent: Friday, March 20, 2020 9:45 AM > > > > To: main@ap-gto.groups.io > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > Hi Ray > > > > I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,> > <https://www.siriusimaging.com,> > > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the > > > update. > > > > > > > > cytan > > > > > > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > No connection is required. > > > > > > > > You're computer/browser must be able to access https://www.siriusimaging.com. > > > > > > > > -Ray Gralak > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > Author of PEMPro V3: https://www.ccdware.com > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von > > > > > Sent: Friday, March 20, 2020 8:16 AM > > > > > To: main@ap-gto.groups.io > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Hi Ray, > > > > > > > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are > available. Do I > > > have > > > > > to be connected to a mount? > > > > > > > > > > Konstantin > > > > > > > > > > > > > > > Konstantin v. Poschinger > > > > > > > > > > Hammerichstr. 5 > > > > > 22605 Hamburg > > > > > 040/8805747 > > > > > 0171 1983476 > > > > > > > > > > > > > > > Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>: > > > > > > > > > > Hi Brian, > > > > > > > > > > When you run APCC it will indicate a new version is available in the title. Then from APCC's help > menu > > > > > you can use Check for updates to get the download link. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > Author of PEMPro V3: https://www.ccdware.com <https://www.ccdware.com> > <https://www.ccdware.com> <https://www.ccdware.com> > > <https://www.ccdware.com> > > > <https://www.ccdware.com/> > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente > > > > > Sent: Thursday, March 19, 2020 8:39 PM > > > > > To: main@ap-gto.groups.io > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Ray where can we download this latest version? > > > > > > > > > > AP site only has link to 1.8.0.5 right now > > > > > > > > > > thanks -Brian > > > > > > > > > > On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > now; > > > > > formerly > > > > > there > > > > > > were several more? > > > > > > > > > > That was fixed in 1.8.0.8/9. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > Author of PEMPro V3: https://www.ccdware.com > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via > > > > > Groups.Io > > > > > > Sent: Thursday, March 19, 2020 8:11 PM > > > > > > To: main@ap-gto.groups.io > > > > > > Subject: [ap-gto] APCC rate settings > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > now; > > > > > formerly > > > > > there > > > > > > were several more? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > Brian > > > > > > > > > > > > > > > > > > > > Brian Valente > > > > > portfolio brianvalentephotography.com <http://brianvalentephotography.com/> > > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com> > <http://brianvalentephotography.com> > > <http://brianvalentephotography.com> > > > <http://brianvalentephotography.com> > > > > <http://brianvalentephotography.com/> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > Brian > > > > Brian Valente > portfolio brianvalentephotography.com <http://brianvalentephotography.com> >
|
|
|
|
Official direct links to APCC v1.8.0.8/9 and AP V2 Driver 5.30.09
Ray Gralak
For those who are having trouble with a problem with Check for updates here are the direct links to the downloads:
AP V2 driver 5.30.09: https://www.gralak.com/apdriver/AstroPhysics_V2_Setup_5.30.09.exe APCC Standard 1.8.0.8: https://www.apastrosoftware.com/apcc_download/APCC_Standard_Setup_1.8.0.8.exe APCC Pro 1.8.0.9: https://www.apastrosoftware.com/apcc_download/APCC_Pro_Setup_1.8.0.9.exe APCC Standard PDF: https://www.apastrosoftware.com/apcc_download/apcc-std.pdf APCC Pro PDF: https://www.apastrosoftware.com/apcc_download/apcc-pro.pdf -Ray Gralak Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
|
|
|
|
RAPAS App
From time to time I see someone mention the RAPAS phone app. I have looked in the app store and have never found it. Is it only in the Apple store? I'm looking for the Android version of it exists. Any help would be appreciated. Thanks, Charles
|
|
|
|
Re: APCC rate settings
Ray Gralak
Hi Cytan,
toggle quoted messageShow quoted text
I got the dump. Yes, IPV4 is enabled. So something must be blocking the transfer, but I don't know what that could be. There are no hits from your IP address and no errors in the server's error log. -Ray Gralak Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
-----Original Message-----
|
|
|
|
Re: APCC rate settings
I literally just applied all the Windows updates and did the 1.8.0.5 update before running the check ipv4 is active on that connection, and it's connected to the internet (which is how i did the other updates) however, it's on it's packed up and on its way to obstech now, so i won't be able to do any checking or testing for a few weeks
On Fri, Mar 20, 2020 at 7:45 PM Ray Gralak <groups3@...> wrote: Brian and cytan, --
|
|
|
|
Re: APCC rate settings
Cheng-Yang Tan
I just sent the info to Ray. cytan
On Friday, March 20, 2020, 09:56:54 PM CDT, Bill Long <bill@...> wrote:
Open CMD.exe and run this:
ipconfig /all
Then paste in the results into an email to Ray directly.
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io <cytan299@...>
Sent: Friday, March 20, 2020 7:54 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] APCC rate settings Hi Ray,
You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.
Windows10 is at latest service pack and everything is up to date.
cytan
On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:
Brian and cytan,
1. I am wondering if you have IPV4 enabled on your LAN port? 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework? -Ray Gralak Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente > Sent: Friday, March 20, 2020 7:27 PM > To: main@ap-gto.groups.io > Subject: Re: [ap-gto] APCC rate settings > > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here > > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote: > > > Hi Ray, > I added APCC to the firewall but the problem remains: > Inline image > > cytan > > > > On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote: > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > AstroPhysicsCommandCenter.exe > > -Ray Gralak > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > Author of PEMPro V3: https://www.ccdware.com > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > -----Original Message----- > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > Sent: Friday, March 20, 2020 10:55 AM > > To: main@ap-gto.groups.io > > Subject: Re: [ap-gto] APCC rate settings > > > > Hi Ray, > > Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks > Mac user :) > > Here's the screen shot for the firewall settings on my Win 10: > > > > Inline image > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > > > cytan > > > > > > > > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked > yes to a > > prompt that disabled APCC from being able to access the web. There is not much else that could prevent > APCC > > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't > updated > > an optional update related to .Net framework. > > > > -Ray Gralak > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > Author of PEMPro V3: https://www.ccdware.com > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > -----Original Message----- > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > > Sent: Friday, March 20, 2020 10:37 AM > > > To: main@ap-gto.groups.io > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > Hi Ray > > > I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on > Win10? > > > > > > cytan > > > > > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your > computer. > > > > > > Try turning AV off then try again. > > > > > > -Ray Gralak > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > Author of PEMPro V3: https://www.ccdware.com > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > -----Original Message----- > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > > > Sent: Friday, March 20, 2020 9:45 AM > > > > To: main@ap-gto.groups.io > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > Hi Ray > > > > I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,> > <https://www.siriusimaging.com,> > > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the > > > update. > > > > > > > > cytan > > > > > > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > No connection is required. > > > > > > > > You're computer/browser must be able to access https://www.siriusimaging.com. > > > > > > > > -Ray Gralak > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > Author of PEMPro V3: https://www.ccdware.com > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von > > > > > Sent: Friday, March 20, 2020 8:16 AM > > > > > To: main@ap-gto.groups.io > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Hi Ray, > > > > > > > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are > available. Do I > > > have > > > > > to be connected to a mount? > > > > > > > > > > Konstantin > > > > > > > > > > > > > > > Konstantin v. Poschinger > > > > > > > > > > Hammerichstr. 5 > > > > > 22605 Hamburg > > > > > 040/8805747 > > > > > 0171 1983476 > > > > > > > > > > > > > > > Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>: > > > > > > > > > > Hi Brian, > > > > > > > > > > When you run APCC it will indicate a new version is available in the title. Then from APCC's help > menu > > > > > you can use Check for updates to get the download link. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > Author of PEMPro V3: https://www.ccdware.com <https://www.ccdware.com> > <https://www.ccdware.com> <https://www.ccdware.com> > > <https://www.ccdware.com> > > > <https://www.ccdware.com/> > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente > > > > > Sent: Thursday, March 19, 2020 8:39 PM > > > > > To: main@ap-gto.groups.io > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Ray where can we download this latest version? > > > > > > > > > > AP site only has link to 1.8.0.5 right now > > > > > > > > > > thanks -Brian > > > > > > > > > > On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > now; > > > > > formerly > > > > > there > > > > > > were several more? > > > > > > > > > > That was fixed in 1.8.0.8/9. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > Author of PEMPro V3: https://www.ccdware.com > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via > > > > > Groups.Io > > > > > > Sent: Thursday, March 19, 2020 8:11 PM > > > > > > To: main@ap-gto.groups.io > > > > > > Subject: [ap-gto] APCC rate settings > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > now; > > > > > formerly > > > > > there > > > > > > were several more? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > Brian > > > > > > > > > > > > > > > > > > > > Brian Valente > > > > > portfolio brianvalentephotography.com <http://brianvalentephotography.com/> > > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com> > <http://brianvalentephotography.com> > > <http://brianvalentephotography.com> > > > <http://brianvalentephotography.com> > > > > <http://brianvalentephotography.com/> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > Brian > > > > Brian Valente > portfolio brianvalentephotography.com <http://brianvalentephotography.com> >
|
|
|
|
Re: APCC rate settings
Ray Gralak
> You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it > explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.
It’s in windows, under Network Connections. For example, here is a screen shot from one of my computers. Find the proper network connection, right click and select properties. Make sure TCP/IPv4 is enabled
-Ray Gralak Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via Groups.Io > Sent: Friday, March 20, 2020 7:54 PM > To: main@ap-gto.groups.io > Subject: Re: [ap-gto] APCC rate settings > > Hi Ray, > You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it > explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6. > > Windows10 is at latest service pack and everything is up to date. > > cytan > > On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote: > > > Brian and cytan, > > 1. I am wondering if you have IPV4 enabled on your LAN port? > > 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework? > > -Ray Gralak > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > Author of PEMPro V3: https://www.ccdware.com > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > -----Original Message----- > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente > > Sent: Friday, March 20, 2020 7:27 PM > > To: main@ap-gto.groups.io > > Subject: Re: [ap-gto] APCC rate settings > > > > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here > > > > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299@...> wrote: > > > > > > Hi Ray, > > I added APCC to the firewall but the problem remains: > > Inline image > > > > cytan > > > > > > > > On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > > > AstroPhysicsCommandCenter.exe > > > > -Ray Gralak > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > Author of PEMPro V3: https://www.ccdware.com > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > -----Original Message----- > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > > Groups.Io > > > Sent: Friday, March 20, 2020 10:55 AM > > > To: main@ap-gto.groups.io > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > Hi Ray, > > > Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks > > Mac user :) > > > Here's the screen shot for the firewall settings on my Win 10: > > > > > > Inline image > > > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > > > > > cytan > > > > > > > > > > > > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked > > yes to a > > > prompt that disabled APCC from being able to access the web. There is not much else that could prevent > > APCC > > > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't > > updated > > > an optional update related to .Net framework. > > > > > > -Ray Gralak > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > Author of PEMPro V3: https://www.ccdware.com > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > -----Original Message----- > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > > Groups.Io > > > > Sent: Friday, March 20, 2020 10:37 AM > > > > To: main@ap-gto.groups.io > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > Hi Ray > > > > I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on > > Win10? > > > > > > > > cytan > > > > > > > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your > > computer. > > > > > > > > Try turning AV off then try again. > > > > > > > > -Ray Gralak > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > Author of PEMPro V3: https://www.ccdware.com > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > > Groups.Io > > > > > Sent: Friday, March 20, 2020 9:45 AM > > > > > To: main@ap-gto.groups.io > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Hi Ray > > > > > I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,> > <https://www.siriusimaging.com,> > > <https://www.siriusimaging.com,> > > > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the > > > > update. > > > > > > > > > > cytan > > > > > > > > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > > > > No connection is required. > > > > > > > > > > You're computer/browser must be able to access https://www.siriusimaging.com. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > Author of PEMPro V3: https://www.ccdware.com > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von > > > > > > Sent: Friday, March 20, 2020 8:16 AM > > > > > > To: main@ap-gto.groups.io > > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > > > Hi Ray, > > > > > > > > > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are > > available. Do I > > > > have > > > > > > to be connected to a mount? > > > > > > > > > > > > Konstantin > > > > > > > > > > > > > > > > > > Konstantin v. Poschinger > > > > > > > > > > > > Hammerichstr. 5 > > > > > > 22605 Hamburg > > > > > > 040/8805747 > > > > > > 0171 1983476 > > > > > > > > > > > > > > > > > > Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>: > > > > > > > > > > > > Hi Brian, > > > > > > > > > > > > When you run APCC it will indicate a new version is available in the title. Then from APCC's help > > menu > > > > > > you can use Check for updates to get the download link. > > > > > > > > > > > > -Ray Gralak > > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > > Author of PEMPro V3: https://www.ccdware.com <https://www.ccdware.com> > <https://www.ccdware.com> > > <https://www.ccdware.com> <https://www.ccdware.com> > > > <https://www.ccdware.com> > > > > <https://www.ccdware.com/> > > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente > > > > > > Sent: Thursday, March 19, 2020 8:39 PM > > > > > > To: main@ap-gto.groups.io > > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > > > Ray where can we download this latest version? > > > > > > > > > > > > AP site only has link to 1.8.0.5 right now > > > > > > > > > > > > thanks -Brian > > > > > > > > > > > > On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > > now; > > > > > > formerly > > > > > > there > > > > > > > were several more? > > > > > > > > > > > > That was fixed in 1.8.0.8/9. > > > > > > > > > > > > -Ray Gralak > > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > > Author of PEMPro V3: https://www.ccdware.com > > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via > > > > > > Groups.Io > > > > > > > Sent: Thursday, March 19, 2020 8:11 PM > > > > > > > To: main@ap-gto.groups.io > > > > > > > Subject: [ap-gto] APCC rate settings > > > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > > now; > > > > > > formerly > > > > > > there > > > > > > > were several more? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > Brian > > > > > > > > > > > > > > > > > > > > > > > > Brian Valente > > > > > > portfolio brianvalentephotography.com <http://brianvalentephotography.com/> > > > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com> > <http://brianvalentephotography.com> > > <http://brianvalentephotography.com> > > > <http://brianvalentephotography.com> > > > > <http://brianvalentephotography.com> > > > > > <http://brianvalentephotography.com/> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > Brian > > > > > > > > Brian Valente > > portfolio brianvalentephotography.com <http://brianvalentephotography.com> > > > > > > >
|
|
|
|
Re: APCC rate settings
Bill Long
Open CMD.exe and run this:
ipconfig /all
Then paste in the results into an email to Ray directly.
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Cheng-Yang Tan via Groups.Io <cytan299@...>
Sent: Friday, March 20, 2020 7:54 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] APCC rate settings Hi Ray,
You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6.
Windows10 is at latest service pack and everything is up to date.
cytan
On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:
Brian and cytan,
1. I am wondering if you have IPV4 enabled on your LAN port? 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework? -Ray Gralak Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente > Sent: Friday, March 20, 2020 7:27 PM > To: main@ap-gto.groups.io > Subject: Re: [ap-gto] APCC rate settings > > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here > > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote: > > > Hi Ray, > I added APCC to the firewall but the problem remains: > Inline image > > cytan > > > > On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote: > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > AstroPhysicsCommandCenter.exe > > -Ray Gralak > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > Author of PEMPro V3: https://www.ccdware.com > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > -----Original Message----- > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > Sent: Friday, March 20, 2020 10:55 AM > > To: main@ap-gto.groups.io > > Subject: Re: [ap-gto] APCC rate settings > > > > Hi Ray, > > Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks > Mac user :) > > Here's the screen shot for the firewall settings on my Win 10: > > > > Inline image > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > > > cytan > > > > > > > > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked > yes to a > > prompt that disabled APCC from being able to access the web. There is not much else that could prevent > APCC > > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't > updated > > an optional update related to .Net framework. > > > > -Ray Gralak > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > Author of PEMPro V3: https://www.ccdware.com > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > -----Original Message----- > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > > Sent: Friday, March 20, 2020 10:37 AM > > > To: main@ap-gto.groups.io > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > Hi Ray > > > I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on > Win10? > > > > > > cytan > > > > > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your > computer. > > > > > > Try turning AV off then try again. > > > > > > -Ray Gralak > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > Author of PEMPro V3: https://www.ccdware.com > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > -----Original Message----- > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > > > Sent: Friday, March 20, 2020 9:45 AM > > > > To: main@ap-gto.groups.io > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > Hi Ray > > > > I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,> > <https://www.siriusimaging.com,> > > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the > > > update. > > > > > > > > cytan > > > > > > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > No connection is required. > > > > > > > > You're computer/browser must be able to access https://www.siriusimaging.com. > > > > > > > > -Ray Gralak > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > Author of PEMPro V3: https://www.ccdware.com > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von > > > > > Sent: Friday, March 20, 2020 8:16 AM > > > > > To: main@ap-gto.groups.io > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Hi Ray, > > > > > > > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are > available. Do I > > > have > > > > > to be connected to a mount? > > > > > > > > > > Konstantin > > > > > > > > > > > > > > > Konstantin v. Poschinger > > > > > > > > > > Hammerichstr. 5 > > > > > 22605 Hamburg > > > > > 040/8805747 > > > > > 0171 1983476 > > > > > > > > > > > > > > > Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>: > > > > > > > > > > Hi Brian, > > > > > > > > > > When you run APCC it will indicate a new version is available in the title. Then from APCC's help > menu > > > > > you can use Check for updates to get the download link. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > Author of PEMPro V3: https://www.ccdware.com <https://www.ccdware.com> > <https://www.ccdware.com> <https://www.ccdware.com> > > <https://www.ccdware.com> > > > <https://www.ccdware.com/> > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente > > > > > Sent: Thursday, March 19, 2020 8:39 PM > > > > > To: main@ap-gto.groups.io > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Ray where can we download this latest version? > > > > > > > > > > AP site only has link to 1.8.0.5 right now > > > > > > > > > > thanks -Brian > > > > > > > > > > On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > now; > > > > > formerly > > > > > there > > > > > > were several more? > > > > > > > > > > That was fixed in 1.8.0.8/9. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > Author of PEMPro V3: https://www.ccdware.com > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via > > > > > Groups.Io > > > > > > Sent: Thursday, March 19, 2020 8:11 PM > > > > > > To: main@ap-gto.groups.io > > > > > > Subject: [ap-gto] APCC rate settings > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > now; > > > > > formerly > > > > > there > > > > > > were several more? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > Brian > > > > > > > > > > > > > > > > > > > > Brian Valente > > > > > portfolio brianvalentephotography.com <http://brianvalentephotography.com/> > > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com> > <http://brianvalentephotography.com> > > <http://brianvalentephotography.com> > > > <http://brianvalentephotography.com> > > > > <http://brianvalentephotography.com/> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > Brian > > > > Brian Valente > portfolio brianvalentephotography.com <http://brianvalentephotography.com> >
|
|
|
|
Re: APCC rate settings
Cheng-Yang Tan
Hi Ray, You mean whether IPV4 is enabled on my cable modem? I'm actually not sure. I logged into it nowhere does it explicitly say IPv4, but do see internet addresses that look like IPv4 for the modem. There is a tab for IPv6. Windows10 is at latest service pack and everything is up to date. cytan
On Friday, March 20, 2020, 09:45:20 PM CDT, Ray Gralak <groups3@...> wrote:
Brian and cytan, 1. I am wondering if you have IPV4 enabled on your LAN port? 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework? -Ray Gralak Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > -----Original Message----- > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente > Sent: Friday, March 20, 2020 7:27 PM > To: main@ap-gto.groups.io > Subject: Re: [ap-gto] APCC rate settings > > fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here > > On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote: > > > Hi Ray, > I added APCC to the firewall but the problem remains: > Inline image > > cytan > > > > On Friday, March 20, 2020, 08:49:09 PM CDT, Ray Gralak <groups3@...> wrote: > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > AstroPhysicsCommandCenter.exe > > -Ray Gralak > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > Author of PEMPro V3: https://www.ccdware.com > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > -----Original Message----- > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > Sent: Friday, March 20, 2020 10:55 AM > > To: main@ap-gto.groups.io > > Subject: Re: [ap-gto] APCC rate settings > > > > Hi Ray, > > Sorry for being dumber than rocks when it comes to Windows stuff. I'm more of a dumber than rocks > Mac user :) > > Here's the screen shot for the firewall settings on my Win 10: > > > > Inline image > > > > I don't see APCC in the list. What is APCC called in the firewall so that I can enable it? > > > > cytan > > > > > > > > On Friday, March 20, 2020, 12:49:39 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > Windows Defender Firewall can block applications. Without realizing the impact you might have clicked > yes to a > > prompt that disabled APCC from being able to access the web. There is not much else that could prevent > APCC > > from doing a simple HTML request. I guess maybe it could be that you need to update windows or haven't > updated > > an optional update related to .Net framework. > > > > -Ray Gralak > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > Author of PEMPro V3: https://www.ccdware.com > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > -----Original Message----- > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > > Sent: Friday, March 20, 2020 10:37 AM > > > To: main@ap-gto.groups.io > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > Hi Ray > > > I don't have any purchased AV on my Win10. Unless you mean whatever AV that comes standard on > Win10? > > > > > > cytan > > > > > > On Friday, March 20, 2020, 12:33:02 PM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > Okay, then maybe your anti-virus application is blocking APCC from sending anything off your > computer. > > > > > > Try turning AV off then try again. > > > > > > -Ray Gralak > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > Author of PEMPro V3: https://www.ccdware.com > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > -----Original Message----- > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Cheng-Yang Tan via > Groups.Io > > > > Sent: Friday, March 20, 2020 9:45 AM > > > > To: main@ap-gto.groups.io > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > Hi Ray > > > > I can see https://www.siriusimaging.com, <https://www.siriusimaging.com,> > <https://www.siriusimaging.com,> > > <https://www.siriusimaging.com,> but 1.8.0.4 does not see the > > > update. > > > > > > > > cytan > > > > > > > > On Friday, March 20, 2020, 11:27:28 AM CDT, Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > No connection is required. > > > > > > > > You're computer/browser must be able to access https://www.siriusimaging.com. > > > > > > > > -Ray Gralak > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > Author of PEMPro V3: https://www.ccdware.com > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Konstantin von > > > > > Sent: Friday, March 20, 2020 8:16 AM > > > > > To: main@ap-gto.groups.io > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Hi Ray, > > > > > > > > > > I ran APCC Pro 1.8.0.5. When I check for updates I get the answer No updates to APCC are > available. Do I > > > have > > > > > to be connected to a mount? > > > > > > > > > > Konstantin > > > > > > > > > > > > > > > Konstantin v. Poschinger > > > > > > > > > > Hammerichstr. 5 > > > > > 22605 Hamburg > > > > > 040/8805747 > > > > > 0171 1983476 > > > > > > > > > > > > > > > Am 20.03.2020 um 05:32 schrieb Ray Gralak <groups3@...>: > > > > > > > > > > Hi Brian, > > > > > > > > > > When you run APCC it will indicate a new version is available in the title. Then from APCC's help > menu > > > > > you can use Check for updates to get the download link. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > Author of PEMPro V3: https://www.ccdware.com <https://www.ccdware.com> > <https://www.ccdware.com> <https://www.ccdware.com> > > <https://www.ccdware.com> > > > <https://www.ccdware.com/> > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Brian Valente > > > > > Sent: Thursday, March 19, 2020 8:39 PM > > > > > To: main@ap-gto.groups.io > > > > > Subject: Re: [ap-gto] APCC rate settings > > > > > > > > > > Ray where can we download this latest version? > > > > > > > > > > AP site only has link to 1.8.0.5 right now > > > > > > > > > > thanks -Brian > > > > > > > > > > On Thu, Mar 19, 2020 at 8:21 PM Ray Gralak <groups3@...> wrote: > > > > > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > now; > > > > > formerly > > > > > there > > > > > > were several more? > > > > > > > > > > That was fixed in 1.8.0.8/9. > > > > > > > > > > -Ray Gralak > > > > > Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro > > > > > Author of PEMPro V3: https://www.ccdware.com > > > > > Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver > > > > > > > > > > > > > > > > -----Original Message----- > > > > > > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Peter Bresler via > > > > > Groups.Io > > > > > > Sent: Thursday, March 19, 2020 8:11 PM > > > > > > To: main@ap-gto.groups.io > > > > > > Subject: [ap-gto] APCC rate settings > > > > > > > > > > > > Running APPC 1.8.0.4 with GTO4 on my Mach1 it appears there are only four rate settings > now; > > > > > formerly > > > > > there > > > > > > were several more? > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > Brian > > > > > > > > > > > > > > > > > > > > Brian Valente > > > > > portfolio brianvalentephotography.com <http://brianvalentephotography.com/> > > > > > <http://brianvalentephotography.com <http://brianvalentephotography.com> > <http://brianvalentephotography.com> > > <http://brianvalentephotography.com> > > > <http://brianvalentephotography.com> > > > > <http://brianvalentephotography.com/> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > Brian > > > > Brian Valente > portfolio brianvalentephotography.com <http://brianvalentephotography.com> >
|
|
|
|
Re: APPM Model Creation Problem
Wayne Hixson
Ok. Most of the points would be on the east side of the meridian and APPM does limit the automated points to the visible area.. I'm assuming it will do a flip if I attempt to map a few stars on the other side?
|
|
|
|
Re: APCC rate settings
Bill Long
I just tested this and was given the option to download the new version. I am on 1.8.0.5 (Pro) though. Not sure that matters...
From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Brian Valente <bvalente@...>
Sent: Friday, March 20, 2020 7:27 PM To: main@ap-gto.groups.io <main@ap-gto.groups.io> Subject: Re: [ap-gto] APCC rate settings fwiw mine reported no updates either, but i'm not too worried about it. i'll watch for updates here
On Fri, Mar 20, 2020 at 6:58 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
|
|
|
|
Re: APCC rate settings
Ray Gralak
Brian and cytan,
toggle quoted messageShow quoted text
1. I am wondering if you have IPV4 enabled on your LAN port? 2. Have you applied all Windows updates and especially all optional updates having to do with .Net framework? -Ray Gralak Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro Author of PEMPro V3: https://www.ccdware.com Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
-----Original Message-----
|
|
|
|
Re: APCC rate settings
agreed :)
On Fri, Mar 20, 2020 at 7:29 PM Cheng-Yang Tan via Groups.Io <cytan299=yahoo.com@groups.io> wrote:
--
|
|
|
