Re: set screw question


Karen Christen
 

Here’s the link to the photo:

The following photos have been uploaded to the set screw album of the main@ap-gto.groups.io group.

By: Peter Santangeli <peter@...>

Karen

AP

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Peter Santangeli
Sent: Wednesday, May 4, 2022 10:49 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] set screw question

 

Hi George,

 

I put the photo in an album called 'setscrew'. Not sure how to reference a photo on the forum here. 

 

It' actually the little setscrew that is visible through a hole inside the connector as you rotate the piece that screws on to the controller.

 

pete

 

 

 

On Wed, May 4, 2022 at 8:43 AM George <george@...> wrote:

Peter,

 

I don’t see your photo, but you may be referring to:

 

Servo cable strain relief “U” clamps use

M2 x 8 mm slotted screws

 

 

Regards,

 

George

 

George Whitney

Astro-Physics, Inc.

Phone:  815-222-6538 (direct line)

Phone:  815-282-1513 (office)

Email:  george@...

Video Tutorials: https://www.youtube.com/astrophysicscorp 

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Peter Santangeli
Sent: Wednesday, May 4, 2022 10:26 AM
To: main@ap-gto.groups.io
Subject: [ap-gto] set screw question

 

Does anyone know what the length and thread of the following set screw is:

https://ap-gto.groups.io/g/main/photo/274817/3424920?p=Created%2C%2C%2C20%2C2%2C0%2C0

It's part of the Y cable. I lost it years ago, and I'd rather not throw out a perfectly good cable when all I'm missing is a screw.

pete


--
Karen Christen
Astro-Physics

Join main@ap-gto.groups.io to automatically receive all group messages.