Re: 1600GTO Encoder LED Color #Absolute_Encoders


Bill Long
 

I should clarify, the tape is under the casing acting as a minor shim. 



From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Bill Long <bill@...>
Sent: Saturday, April 2, 2022 7:17 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] 1600GTO Encoder LED Color #Absolute_Encoders
 
Gaffers tape seems to work as well. My OCD is cured. 😂

image/jpeg



From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Roland Christen via groups.io <chris1011@...>
Sent: Saturday, January 1, 2022 8:31 AM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] 1600GTO Encoder LED Color #Absolute_Encoders
 
That works too.

Roland



-----Original Message-----
From: psparkman via groups.io <psparkman@...>
To: main@ap-gto.groups.io
Sent: Fri, Dec 31, 2021 7:44 pm
Subject: Re: [ap-gto] 1600GTO Encoder LED Color #Absolute_Encoders

I did some adjusting of the LED Cover on the Dec.  Sliding it around would not make it turn green.  However, I noticed that when I pulled up on it, it would turn green.  So I took some thin brass shim stock and put it between the cover and the mount.  This let me tighten the cover screws and the LED stayed green at all DEC angles.

--
Roland Christen
Astro-Physics

Join main@ap-gto.groups.io to automatically receive all group messages.