The camera is an ASI6200mm pro, and the frame size is already set to center 1/2. Just to be clear, this setup has been working since the mount was installed here in August. Last night was the first problem occurrence. I can try 1/3 and 1/4 Tuesday and report.
Unfortunately the ZWO ASCOM Camera driver is extremely memory inefficient. A single unbinned full-frame image from your camera will require well over the 1GB graphics maximum memory available to PEMPro. If you have updated the ZWO camera driver or ASCOM platform recently, then memory consumption could be even greater, requiring a smaller image.
PEMPro only needs a single star to track polar alignment or PEC, so 1/3 or 1/4 frame is more than good enough! :-)
-Ray
-----Original Message----- From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of legendtrail via groups.io Sent: Monday, March 7, 2022 7:46 PM To: main@ap-gto.groups.io Subject: Re: [ap-gto] PEMPro error msgs
Hello Ray, The camera is an ASI6200mm pro, and the frame size is already set to center 1/2. Just to be clear, this setup has been working since the mount was installed here in August. Last night was the first problem occurrence. I can try 1/3 and 1/4 Tuesday and report.
