Re: AP 900 GTO CP2 Pempro

Christopher Erickson

And check and make sure your CP3 has the latest chip inside.

-Christopher Erickson
Observatory engineer
Waikoloa, HI 96738

On Tue, Feb 8, 2022, 7:35 AM Emilio J. Robau, P.E. <ejr@...> wrote:

I obtained my used CP3, installed it, ran a new PE Curve, obtained 3.16 native PE.  Fed the mount CP3 box a new PE curve that was not inverted, and PE was reduced to 1.5 arc sec.   So, I will stick with the non inverted curve.  I bet it is actually lower because I only had two worm cycles to analyze since the clouds moved in.   Thereafter I installed APCC on my laptop for mobile telescope setup, connected, set up an observation location and am one happy camper.  NINA working well with the setup.

The only issue I had was locating a suitable star on Pempro.  Something weird is going on because in order to cure the issue, I had to disconnect the camera, reset the download speed to a HIGER value, and then reconnect and everything was fine for the couple of runs I ran on that PE curve.   Don't know what is going on except that maybe my particular ZWO 183M is finicky while attached to Pempro.

Happy Camping and Clear Skies 

Join to automatically receive all group messages.