Re: AP1100AE, while tracking/guiding "Motor Stall"


Peter Nagy
 

One time I loosened all clutches in both axes to try to loosen the axes so I can balance easier. The clutches were loosened far enough that when I was swinging RA axis back and forth and one of the clutch knobs slammed on the RA motor box and shifted the gear mesh pretty tight and caused motor stall. I re-meshed the gears and all is well.

Those who own 1100GTO, do not loosen the clutch knobs too far.

Peter

Join main@ap-gto.groups.io to automatically receive all group messages.