Re: APPM different with V1.9.0.9?


Ray Gralak
 

Rouz,

I don’t see any warnings in the log snippet you included.

The SLEWUNSAFE commands are normal. A SLEWUNSAFE command is one that APCC should directly execute the slew without having to check for starting/ending counterweight position.

-Ray

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Rouz
Sent: Thursday, September 23, 2021 7:32 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APPM different with V1.9.0.9?

I'll be testing it tonight.

Does anyone know where these slew warnings come from:


0392354 2021-09-23 00:06:10.941: Info, ProcessVPortCommand, RX from VPort 1: :APCC,45352,GZ#
0392355 2021-09-23 00:06:10.941: Info, ProcessVPortCommand, APCC Seq= 45352, CMD=GZ#
0392356 2021-09-23 00:06:10.941: Info, VPortCheckVPort1(COM3), (RX: GZ#), TX:
APCC,13,45352,+343*30:59.7#
0392357 2021-09-23 00:06:10.942: Info, VPort1(COM3), RX:
:APCC,45353,*SLEWUNSAFE,15.5769238888889,78#
0392358 2021-09-23 00:06:10.957: Info, ProcessVPortCommand, RX from VPort 1:
:APCC,45353,*SLEWUNSAFE,15.5769238888889,78#
0392359 2021-09-23 00:06:10.957: Info, ProcessVPortCommand, APCC Seq= 45353,
CMD=*SLEWUNSAFE,15.5769238888889,78#
0392360 2021-09-23 00:06:10.965: Debug, Command Thread, TX=':GH#'|RX='07:00:25.79#'
0392361 2021-09-23 00:06:10.965: Debug, Command Thread, TX (High Priority) = ':RT3#'
0392362 2021-09-23 00:06:10.965: Debug, Command Thread, TX (High Priority) = ':RT2#'
0392363 2021-09-23 00:06:10.966: Debug, Command Thread, TX = ':pS#'
0392364 2021-09-23 00:06:10.973: Info, VPortCheckVPort1(COM3), (RX:
*SLEWUNSAFE,15.5769238888889,78#), TX:

Join main@ap-gto.groups.io to automatically receive all group messages.