Re: APPM different with V18.104.22.168?
Nice and quick response to the issue! :)
From: email@example.com <firstname.lastname@example.org> on behalf of Ray Gralak <iogroups@...>
Sent: Thursday, September 23, 2021 6:00 AM
To: email@example.com <firstname.lastname@example.org>
Subject: Re: [ap-gto] APPM different with V22.214.171.124?
Yes, there was a change to APPM to use the Real-time RADec feature to get the RA and Dec from the mount with less latency. The installed APCC Pro 126.96.36.199 has an extra character (":") in the RA string response, which is invalid, so it always returns RA=0. You can see this in the APPM logs.
This was confusing to me because this was a bug I had fixed before creating the release. When I retested this morning, I could reproduce the problem with the installer version of 188.8.131.52, but not with the debugger on my computer. They should have had the same behavior, so I think I must have missed a step in building the APPM release executable.
So, I apologize for the issue. I created a new version, 184.108.40.206, which I tested, fixes this issue:
> -----Original Message-----
> From: email@example.com [mailto:firstname.lastname@example.org] On Behalf Of Rouz
> Sent: Wednesday, September 22, 2021 9:32 PM
> To: email@example.com
> Subject: [ap-gto] APPM different with V220.127.116.11?
> Hi Ray,
> Just installed V18.104.22.168 and running APPM again.
> The RA Delta figure getting larger and larger with every plateslove and then its fails.
> Im using ASTAP and NINA which working perfectly last week.
> I tried "Use last pate solve's offset as hint" on and off.
> I tried pointing model corrections on and off.
> Attached are the new APPM results: