- Dovelm162 springs too short or assembled wrong?
Re: Dovelm162 springs too short or assembled wrong?
toggle quoted messageShow quoted text
I don't have this problem but I sure appreciate how AP is going about dealing with it. You guys (and gals) are the best!
On September 16, 2021 9:21:35 AM "Marj Christen" <marj@...> wrote:
The assembly procedure and components have not changed for many years. Your is the first concern that I am aware of regarding this issue. I suspect that many users orient the plate so the clamps are down and gravity has assisted the clamp
to move away from the center channel. When the clamps are down, you don’t have to reach over the scope to tighten the knobs.
Nevertheless, we have ordered springs that are longer than what we have used. Once we have tested them to be sure that they have the correct compression, we will send some to you.
I apologize for the inconvenience.
11250 Forest Hills Road
Machesney Park, IL 61115
From: firstname.lastname@example.org <email@example.com>
On Behalf Of Tom Blahovici
Sent: Wednesday, September 15, 2021 10:16 AM
Subject: Re: [ap-gto] Dovelm162 springs too short or assembled wrong?
That's interesting but the saddle is not new. Since I have to seen any other complaints in the past it must be something different now. What's AP going to do about this?
Join firstname.lastname@example.org to automatically receive all group messages.