tracking with APCC 1.9 doesn't work with skyx

Andrea Lucchetti

second post this morning thanks to the good night.
I have APCC PRO and Mach2.

When slewing or closed looping in skyx the tracking rate increase to a point that a 2 second frame is trailed.
I have only one image that show the behaviour in which seems that the trail is actually a set of pulses.

I don't know if useful but in the Rate settings panel setting king rate and pushing "set now" doesn't change anyting.
There is a combination of clicks in "reset tracking rate and "set all" that make the tricks for king rate.
In addition to that the status bar at the bottom always say "sideral" so it is very difficult to understand for me if it worked or not and with which sequence of tabs.
I have few chances to use the telescope so for me it is difficult to provide additional data in the short term.

I can say that Focus Max connected didn't work  alone or from CCDAP. Both leverage a skyx camera add on but never succeeded because stalled in the subframing  (probably because the star moves quicly out of the frame. I will ask some suggestios in a separate post
Thank you

I also tried NINA and had no trouble at all, except that I don't know PHD and guiding was bad.

Join to automatically receive all group messages.