Re: APCC move axis question


Ray Gralak
 

The APCC log you provided does not include any moves with tracking correction enabled.

So, please redo the test with tracking correction enabled and provide logs for both APCC and ASCOM. You do not need to perform tests with tracking correction disabled.

Also, as part of the test, press and hold the East and West buttons for several seconds each so that APCC has time to query RA and Dec values for several seconds in the log.

Thanks,

-Ray

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Andy Ermolli
Sent: Tuesday, August 31, 2021 9:05 AM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] APCC move axis question

Ray, yes the mount moved in all directions when I turned off the model correction. When I turned it back on
the mount did not move.

With the correction on, the driver was showing a custom rate but apcc did not register any movement and the
mount did not move.



Join main@ap-gto.groups.io to automatically receive all group messages.