Re: #APCC - V1.9 Tracking Error #APCC
This is unguided imaging right? If so as a best practice I dial in my PA as close as I can with SharpCap before I build the model. When I was not using encoders I would ensure my PEC curve was solid (~1" or less) using PEMPro and build a new curve if it was no longer correcting as well. Also switch your balancing to neutral in both axis of you haven't already.
Not saying any of these are the cause, just some things to do if you're trying to image unguided.
From: firstname.lastname@example.org <email@example.com> on behalf of Rouz <rbidshahri@...>
Sent: Friday, August 20, 2021 1:22 PM
To: firstname.lastname@example.org <email@example.com>
Subject: Re: [ap-gto] #APCC - V1.9 Tracking Error
Also, I suspect polar alignment isn't perfect. Could that be the cause.
The model can correct for that right? To what degree.
Is that polar az and polar Alt values in the model?