1. Messages
  2. AP V2 driver, move axis command help.

Re: AP V2 driver, move axis command help.

Ray Gralak
 

Could it be that the firmware of the mount does not allow any move axis over sidereal speed?
No... Andy, are you physically in front of the mount to verify this?

If so, and you are sure that's what happening, please run the AP V2 Log Zipper utility (it's included with the A-P driver) and zip up the most recent logs and post them here.

-Ray

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Andy Ermolli
Sent: Sunday, August 15, 2021 2:17 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] AP V2 driver, move axis command help.

Thank you Ray, I tried 1,2, 3 and 4 degrees with both programs and the same thing happens. I see the numbers
change in the driver window but the mount always moves at sidereal rate.

Could it be that the firmware of the mount does not allow any move axis over sidereal speed?
Join main@ap-gto.groups.io to automatically receive all group messages.