Re: APPM with ASI6200 and TSX Imagelink - bogus image data


Bill Long
 


For the first, check those boxes that say to exclude points past a certain error amount. I set those to 10 but 20 is usually fine. The key thing is that you have outliers if you look at the plot and that's the easiest way to take them out.

For the second, looks good. Plenty within the models capability to correct PA error. Check correct for refraction as well.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of ap@... <ap@...>
Sent: Sunday, August 1, 2021 9:10 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] APPM with ASI6200 and TSX Imagelink - bogus image data
 

@Bill Long wrote:

 

  • Post your model tab data. Curious to see your results.

 

Sure.  This is with an NP101is still s, short and light and shouldn’t have much flex, but this was only 37 points, just to see if I could get it to build.

 

Not sure if you mean this:

 

 

Or this?

 

 

Join main@ap-gto.groups.io to automatically receive all group messages.