Re: Debugging Dec failure to move w/1200 CP3


Jeff B
 

Good advice Dale.  👍


On Thu, Jul 29, 2021 at 9:49 AM Dale Ghent <daleg@...> wrote:

Could be the dec cable has developed a connection fault in the form of a broken wire. Swap it with the RA cable and see if moving the dec axis continues to have problems.

> On Jul 29, 2021, at 09:42, Steven Panish <scpanish@...> wrote:
>
> Help!  My 1200 CP3 is intermittently not responding to DEC move commands, either manually from the V2 driver window or the handbox, or via PHD2.  I've unplugged the DEC motor connections and put contact cleaner on the exposed pins, which did not help. Would appreciate help debugging.  It happens a couple times per evening and resolves itself after a minute or two.
>
> thanks,
> Steve
>






Join main@ap-gto.groups.io to automatically receive all group messages.