Re: Mach 2 + 12.5" AGO iDK?

Bill Long

Here are some sample subs:

I took the highest and lowest FWHM from the data set and shared them. 

From: <> on behalf of Bill Long <bill@...>
Sent: Sunday, July 25, 2021 10:12 AM
To: <>
Subject: Re: [ap-gto] Mach 2 + 12.5" AGO iDK?
Circling back on this as I finally got to test this out. I put my 12.5" AGO iDK, Moonlight Nitecrawler, FLI Proline 16803, CFW 5-7, Sagitta OAG, and Ultrastar guide camera on the Mach 2. Balancing the load was pretty easy to do, and I had just enough weights on hand for the job. This is pretty much at capacity for the mount based on the specifications. Might even be a tad over. 😁

Performance was stellar. I made a 98pt model in APPM, and used 5 second guide exposures. I took 5 hours worth of 20 minute HA subs and not a single one had any trailing at all. Very nice tight round stars in all of the images. Guiding was about 0.2-0.35" range throughout the night. Graph picture below.

I'll be getting some more data over the next few nights. I'll share some subs later this evening when I'm back on the Astro PC.

Conclusion: Mach 2 is a beastly mount that easily handled this challenge and passed with flying colors. Well done AP!


From: <> on behalf of Roland Christen via <chris1011@...>
Sent: Friday, April 23, 2021 5:44 PM
To: <>
Subject: Re: [ap-gto] Mach 2 + 12.5" AGO iDK?
Well, I've never tried that scope, but I have loaded my Mach2 to the limit and imaged/guided just fine. Balance is critical and is easy to do.

Weight makes for larger moment, which makes the mount slower to respond to external disturbance, like wind. If your scope is open tube with no shroud, wind will not be a problem.

I will be loading my Mach2 with a 12" F8 carbon fiber Maksutov astrograph in the next couple days. Weight is about the same as your system. I expect that it will handle it fine and will post some guiding results. Will be getting ready for galaxy season.


-----Original Message-----
From: Bill Long <bill@...>
To: AP-GTO Groups. io <>
Sent: Fri, Apr 23, 2021 7:07 pm
Subject: [ap-gto] Mach 2 + 12.5" AGO iDK?

What say ye?

46lbs, but would need to add focuser (8lbs), TCS System (1lb), and camera/accessories (call these 5 lbs). The OTA is about 18" tall (maybe 17.5" but lets call it 18") so this puts me at 18" and 60 lbs.  This puts me right on the yellow on the Mach 2 graph AP has. Length of everything, in focus with camera gear on would be about 45". 

Seems right at the limits, but likely safe. Any ideas on this from AP or others?


Roland Christen

Join to automatically receive all group messages.