the other night I set my Mach 1 up with a RASA 8 as a trial before New Moon. this was a new scope to me. it was balanced , no cabling issues and in fact with the clutches loosened the scope was free to spin in ra and dec with a light touch. Now to the trouble. I noted it was not tracking in RA plus when ever I tried to use the Keypad to force it to move to the west the RA motor noise would last about a second stop with a second short burst and that was it. I could go to the East and use the keypad to move N and S. The battery was well charged. Two mornings before I used this same Mach1 for the Lunar eclipse with out issue.
That Night I took the whole thing down and reassembled in my garage. In the am I tried the K pad on my 1200 mount. No problems.
I hooked the electronics up again, on the Mach 1, using the same battery as the night before and everything worked including tracking a phantom star .
It has worked ever since as I have tried to see if it would fail. What could have been wrong? I did not look at the stall light I guess because it would move N, S and East and freely move with clutches released.
The other issue I have is that the ra gear train noise in ra slewing is not always of the same frequency. It seems to vary a bit. thanks cjacobson