Re: AP1100 park position question


Don Anderson
 

If the price difference is not large, one may as well go for the 1500# column. As they say, how big is big enough!

Don Anderson


On Friday, April 23, 2021, 07:55:51 a.m. MDT, Jack Huerkamp <mallincamusa@...> wrote:


Don,

 

It should be adequate.  A friend of mine used a single 1000 Newton DL2 for his observatory and he had a Meade 14 on a Celestron CGX mount.  It worked well.  I opted for a dual column and I placed the colums with their long dimensions in the East-West position for additional lateral stability.  That worked well when I had a CGX mount and a 10” RC on top.  When I switched to the AP1600 with Lunt 152 and VRC-16, and all the needed 180# of counterweights, I exceeded the lifting capacity of the dual 1000 Newton system.  It still worked but I wanted it to have a positive factor of safety as well as longevity.  So I went with the 2500 Newton columns.  There was not a substantial price difference in the columns.  What does change is the speed of lift.  It use to take about 20 seconds to fully elevate the 1000 Newton columns.  The 2500 Newton columns take over 40 seconds.  Not a big difference, especially once the columns are elevated, they are generally left elevated until I close up for the night.

 

Also, you can make sure the columns are synchronized.  You lower them fully and they stop moving.  You then depress the down button again and you will see a slight dip and rebound in the columns.  That is them resetting.  This keeps them in sync.

 

Yours truly,

 

Jack

 

Jack Huerkamp

Jack's Astro Accessories, LLC

38388 Pine Street

Pearl River, LA 70452-5192

985-445-5063

mallincamusa@...

www.mallincamusa.com

30.37N  89.76W

 

All of us get lost in the darkness.
Dreamers learn to steer by the stars.

………………………………….Neil Peart

 

 

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Don Anderson via groups.io
Sent: Thursday, April 22, 2021 3:44 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] AP1100 park position question

 

Thanks for the info Jack. I would be lifting an AP900 with a 5" refractor and associated guide and finder scopes, cameras and controllers. All told about 90 lb. I may at some point get a 10" or 12" CDK or a larger 160 -175mm refractor. This may push the total weight to maybe 120lb or so. Would a 1000 be good enough? Is there much of a price difference between them?

Don

 

Don Anderson

 

 

On Thursday, April 22, 2021, 12:39:42 p.m. MDT, Jack Huerkamp <mallincamusa@...> wrote:

 

 

Don,

 

Note that the DL2 is available in three thrust capacities – 1000 Newton, 1500 Newton and 2500 Newton (220#, 333# and 555#).  I am using a dual column system so I went from a 440# lifting capacity to a 1111# lifting capacity.

 

Yours truly,

 

Jack

 

Jack Huerkamp

Jack's Astro Accessories, LLC

38388 Pine Street

Pearl River, LA 70452-5192

985-445-5063

mallincamusa@...

www.mallincamusa.com

30.37N  89.76W

 

All of us get lost in the darkness.
Dreamers learn to steer by the stars.

………………………………….Neil Peart

 

 

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Don Anderson via groups.io
Sent: Wednesday, April 21, 2021 7:34 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] AP1100 park position question

 

Thanks for the info Jack. I suspected as much. I checked ebay and they don't show and DL2s right now. I will have to keep my eyes open for one.

 

Don Anderson

 

 

On Wednesday, April 21, 2021, 07:51:02 a.m. MDT, Jack Huerkamp <mallincamusa@...> wrote:

 

 

Don,

 

When I purchased the original pair of lifting columns from Linak, I was over the engineering department of the local public works department in New Orleans and we did a lot of custom fabrications for all of our facilities.  As such, I was able to have them sell me two 1000 Newton columns and the associated controls.   Since I was already an established customer, I was able to get an upgraded set of 2500 Newton columns and associated controls last year.

 

I do not think Linak sells to the general public.

 

Yours truly,

 

Jack

 

Jack Huerkamp

Jack's Astro Accessories, LLC

38388 Pine Street

Pearl River, LA 70452-5192

985-445-5063

mallincamusa@...

www.mallincamusa.com

30.37N  89.76W

 

All of us get lost in the darkness.
Dreamers learn to steer by the stars.

………………………………….Neil Peart

 

 

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Don Anderson via groups.io
Sent: Tuesday, April 20, 2021 11:47 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] AP1100 park position question

 

Jack

Did Linak sell direct to you?

 

Don Anderson

 

 

On Tuesday, April 20, 2021, 09:36:40 p.m. MDT, Jack Huerkamp <mallincamusa@...> wrote:

 

 

Christopher,

 

The company is Linak out of Kentucky and the columns I used were the DL2 2500 Newton rated.  My original ones were rated at 1000 Newtons each when used with a non AP mount.  With the AP1600 and 150# of equipment on the dual column setup, I changed to the 2500 Newton thrust each – 5000 Newton total thrust.

 

DL2: Robust lifting column for desks, workstations and kitchens (linak-us.com)

 

Yours truly,

 

Jack

 

Jack Huerkamp

Jack's Astro Accessories, LLC

38388 Pine Street

Pearl River, LA 70452-5192

985-445-5063

mallincamusa@...

www.mallincamusa.com

30.37N  89.76W

 

All of us get lost in the darkness.
Dreamers learn to steer by the stars.

………………………………….Neil Peart

 

 

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Christopher Erickson
Sent: Tuesday, April 20, 2021 10:09 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] AP1100 park position question

 

Lymax columns. A lot cheaper to buy Lymax off of Ebay or wherever and make your own telescoping pier.


-Christopher Erickson
Observatory engineer
Waikoloa, HI 96738
www.summitkinetics.com
   

 

On Tue, Apr 20, 2021, 9:27 AM Worsel via groups.io <bryancashion=yahoo.com@groups.io> wrote:

Shailesh

I have used Park 4 for several years for exactly the roof height issues that you are evaluating.  This is for a 1100 mount with a 14 CDK scope.  There have been no problems.

I have a PierTech height adjustable pier (http://piertechinc.com/telescope-piers/).  When I need to tinker with equipment, I lower the mount and move it to P3, where it clears the roof. To remove equipment, I loosen the clutches (older style 1100) and rotate/lower the OTA to a separate support table before loosening the dovetail.  I normally leave the pier at almost max height, in order for the roof to clear on opening.

The adjustable piers are actually from another company, but I have forgotten the name.  I think Chris Erickson has these.

Bryan

 

Virus-free. www.avg.com

Join main@ap-gto.groups.io to automatically receive all group messages.