Re: AP1100 park position question


Don Anderson
 

Thanks for the info Jack. I would be lifting an AP900 with a 5" refractor and associated guide and finder scopes, cameras and controllers. All told about 90 lb. I may at some point get a 10" or 12" CDK or a larger 160 -175mm refractor. This may push the total weight to maybe 120lb or so. Would a 1000 be good enough? Is there much of a price difference between them?
Don

Don Anderson


On Thursday, April 22, 2021, 12:39:42 p.m. MDT, Jack Huerkamp <mallincamusa@...> wrote:


Don,

 

Note that the DL2 is available in three thrust capacities – 1000 Newton, 1500 Newton and 2500 Newton (220#, 333# and 555#).  I am using a dual column system so I went from a 440# lifting capacity to a 1111# lifting capacity.

 

Yours truly,

 

Jack

 

Jack Huerkamp

Jack's Astro Accessories, LLC

38388 Pine Street

Pearl River, LA 70452-5192

985-445-5063

mallincamusa@...

www.mallincamusa.com

30.37N  89.76W

 

All of us get lost in the darkness.
Dreamers learn to steer by the stars.

………………………………….Neil Peart

 

 

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Don Anderson via groups.io
Sent: Wednesday, April 21, 2021 7:34 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] AP1100 park position question

 

Thanks for the info Jack. I suspected as much. I checked ebay and they don't show and DL2s right now. I will have to keep my eyes open for one.

 

Don Anderson

 

 

On Wednesday, April 21, 2021, 07:51:02 a.m. MDT, Jack Huerkamp <mallincamusa@...> wrote:

 

 

Don,

 

When I purchased the original pair of lifting columns from Linak, I was over the engineering department of the local public works department in New Orleans and we did a lot of custom fabrications for all of our facilities.  As such, I was able to have them sell me two 1000 Newton columns and the associated controls.   Since I was already an established customer, I was able to get an upgraded set of 2500 Newton columns and associated controls last year.

 

I do not think Linak sells to the general public.

 

Yours truly,

 

Jack

 

Jack Huerkamp

Jack's Astro Accessories, LLC

38388 Pine Street

Pearl River, LA 70452-5192

985-445-5063

mallincamusa@...

www.mallincamusa.com

30.37N  89.76W

 

All of us get lost in the darkness.
Dreamers learn to steer by the stars.

………………………………….Neil Peart

 

 

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Don Anderson via groups.io
Sent: Tuesday, April 20, 2021 11:47 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] AP1100 park position question

 

Jack

Did Linak sell direct to you?

 

Don Anderson

 

 

On Tuesday, April 20, 2021, 09:36:40 p.m. MDT, Jack Huerkamp <mallincamusa@...> wrote:

 

 

Christopher,

 

The company is Linak out of Kentucky and the columns I used were the DL2 2500 Newton rated.  My original ones were rated at 1000 Newtons each when used with a non AP mount.  With the AP1600 and 150# of equipment on the dual column setup, I changed to the 2500 Newton thrust each – 5000 Newton total thrust.

 

DL2: Robust lifting column for desks, workstations and kitchens (linak-us.com)

 

Yours truly,

 

Jack

 

Jack Huerkamp

Jack's Astro Accessories, LLC

38388 Pine Street

Pearl River, LA 70452-5192

985-445-5063

mallincamusa@...

www.mallincamusa.com

30.37N  89.76W

 

All of us get lost in the darkness.
Dreamers learn to steer by the stars.

………………………………….Neil Peart

 

 

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Christopher Erickson
Sent: Tuesday, April 20, 2021 10:09 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] AP1100 park position question

 

Lymax columns. A lot cheaper to buy Lymax off of Ebay or wherever and make your own telescoping pier.


-Christopher Erickson
Observatory engineer
Waikoloa, HI 96738
www.summitkinetics.com
   

 

On Tue, Apr 20, 2021, 9:27 AM Worsel via groups.io <bryancashion=yahoo.com@groups.io> wrote:

Shailesh

I have used Park 4 for several years for exactly the roof height issues that you are evaluating.  This is for a 1100 mount with a 14 CDK scope.  There have been no problems.

I have a PierTech height adjustable pier (http://piertechinc.com/telescope-piers/).  When I need to tinker with equipment, I lower the mount and move it to P3, where it clears the roof. To remove equipment, I loosen the clutches (older style 1100) and rotate/lower the OTA to a separate support table before loosening the dovetail.  I normally leave the pier at almost max height, in order for the roof to clear on opening.

The adjustable piers are actually from another company, but I have forgotten the name.  I think Chris Erickson has these.

Bryan

 

Virus-free. www.avg.com

Join main@ap-gto.groups.io to automatically receive all group messages.