Re: Adding Primaluce Labs ECCO2 for Environmental sensor?


Bill Long
 

Their website says the device has ASCOM drivers so I assume it does.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Wayne Hixson via groups.io <wayneh9026@...>
Sent: Sunday, March 28, 2021 1:11 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Adding Primaluce Labs ECCO2 for Environmental sensor?
 
Thanks! I don’t have it yet, I’ll see if anyone else can report first-hand knowledge. 

Wayne


On Mar 28, 2021, at 1:09 PM, Bill Long <bill@...> wrote:


If it has an Observing Conditions driver you can install that and configure APCC to use it.


From: main@ap-gto.groups.io <main@ap-gto.groups.io> on behalf of Wayne Hixson via groups.io <wayneh9026@...>
Sent: Sunday, March 28, 2021 1:06 PM
To: main@ap-gto.groups.io <main@ap-gto.groups.io>
Subject: Re: [ap-gto] Adding Primaluce Labs ECCO2 for Environmental sensor?
 
It does have an ASCOM driver, reads temperature, pressure and humidity. Not sure if that qualifies? I’ll check with Primaluce.

Join main@ap-gto.groups.io to automatically receive all group messages.