Re: Help Parking AP 900 in TheSky #ASCOM_V2_Driver


Ray Gralak
 

Bob,

I did call up the driver window, set Park 1 down in the lower left corner and clicked OK. Nothing happened.
Nothing should happen immediately because a popup window should show a warning that you should not use Park 1. Parking won't start unless you accept that window.

If you didn't see that warning window then maybe it popped up in an area of the screen where you didn't notice it, or the park button was not fully clicked.

-Ray

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Bob Gillette via groups.io
Sent: Wednesday, March 17, 2021 10:17 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Help Parking AP 900 in TheSky #ASCOM_V2_Driver #ASCOM_V2_Driver

Ray,

Until this morning when I installed the new AP driver, TheSky included setting tracking rates and parking in
positions 1, 2, or 3 in its Telescope/Options menu. To my surprise, these options disappeared after installing the
new AP driver. All I see there now, as Don notes below, are Focus Control and Slew, for which I have no need.

I did call up the driver window, set Park 1 down in the lower left corner and clicked OK. Nothing happened.

Had to go outside and use the handset to park the scope.

Don, thanks for your comments. Happy to use Park 4 if something will activated it.

Bob

Join main@ap-gto.groups.io to automatically receive all group messages.