Re: Counterweight Shaft Case


Stone, Jack G
 

One more tidbit – Joe

 

3M has the glow in the dark tape – so if you inadvertently drop it, it could be quite noticeable.

 

Jack ~

 

BTW: Looking for SCHED80 in lengths less than 10’. I have nothing left over from projects.

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Stone, Jack G
Sent: Tuesday, February 09, 2021 1:59 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Counterweight Shaft Case

 

Joe Z. – here is an image of what I referred to:

 

 

This has to be removed to fit into the schedule 80 2” tube.

This is the counter weight end plate.

 

Regards,

 

Jack ~

 

From: main@ap-gto.groups.io <main@ap-gto.groups.io> On Behalf Of Joe Zeglinski
Sent: Tuesday, February 09, 2021 1:03 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Counterweight Shaft Case

 

Hi Barry,

 

    Guess I missed it – I assumed you had cemented-on a “threaded ABS fitting”,  which would conveniently accommodate a threaded end-cap, so no need of the cap being stored in a case,  or falling off the pipe in the trunk, possibly lost on the ground at night.

Wouldn’t want to risk toe-injury if you held it upright, the wrong end  up, and the cap is slammed off downward by the heavy bar :-)

 

Joe Z.

 

From: Barry Megdal

Sent: Tuesday, February 9, 2021 3:18 PM

Subject: Re: [ap-gto] Counterweight Shaft Case

 

I keep the end cap with other small accessories in a small box.

- Barry

Join main@ap-gto.groups.io to automatically receive all group messages.