Hi John,

After connecting to the mount via apcc only (no keypad connected) and unparking, I tried some 'manual' slews, using
the N S E W buttons in apcc. Using the mouse, if I slew the mount
about 20 degrees in DEC (either N or S) and then stop slewing, the current DEC readout (both in apcc and in the
driver window) will indicate 00 00 00.

I finally had a chance to go through your logs, and unfortunately, I cannot find any indication of the behavior you were seeing.

How about trying this again and taking a screenshot of what you are seeing (Dec=00 00 00)?

-Ray Gralak
Author of PEMPro
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of John
Sent: Thursday, December 24, 2020 3:19 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Initial GoTo In APCC Pro Cause Nose or Tail Dive

Aloha Ray,

2 days worth came out to be about 11mbs. I just tried sending the zip file via email, thanks!

John