Re: Version P02-08 now available for GTOCP4 and GTOCP5 control boxes
Also correct with the most recent versions of APCC. Ray has already adjusted APCC for the newer rate table.
11250 Forest Hills Rd
Machesney Park, IL 61115
From: firstname.lastname@example.org [mailto:email@example.com] On Behalf Of Bill Long
Sent: Thursday, December 24, 2020 12:00 AM
Subject: Re: [ap-gto] Version P02-08 now available for GTOCP4 and GTOCP5 control boxes
I should also add that APCC movements are not affected by this change, so if you use the "buttons" in APCC to move the mount, they will work at the proper speed selected.
From: firstname.lastname@example.org <email@example.com> on behalf of Bill Long <bill@...>
SN 4298 is new enough to use Keypad V5. It is not released yet though.
You can install P02-08, but if you do the keypad button movement for 1200x is not accessible due to the change in the controller. Slews will still be fine, but the button movements wont. This will be solved when Keypad V5 is released for CP4 users.
From: firstname.lastname@example.org <email@example.com> on behalf of M Hambrick <mhambrick563@...>
I want to make sure I understand Marj's comment above. Are you saying that for those of us with older keypads and software versions (mine is S/N 4298 GTO with software version 4.19.2), we should wait until the new keypad software is released and installed before loading the new version P02-08 into our GTOCP4 ?