Hi Yves,

> Did a point run last night and got bad results with ASCOM 6.5 SP2.  Downgraded to version ASCOM 6.4RC1 and
> everything went fine.

I am not sure what you mean... there is no ASCOM 6.5 SP2. Did you mean SP1?

> You mentioned ASCOM 6.5 SP1 beta version but I'm a bit confused.  Is the beta 6.5RC1 version the same as
> non-beta 6.5RC1?

You'll have to ask that question on the ASCOM group. I haven't been keeping track of the changes they make. I was told the link I posted is to the 6.5 SP1 beta.
 
-Ray Gralak
Author of PEMPro
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver


> -----Original Message-----
> From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Yves Laroche
> Sent: Saturday, October 31, 2020 2:19 PM
> To: main@ap-gto.groups.io
> Subject: Re: [ap-gto] Do NOT use ASCOM Platform v. 6.5 with APCC Pro #APCC #ASCOM_V2_Driver
>
> Hi Ray,
>
> Did a point run last night and got bad results with ASCOM 6.5 SP2.  Downgraded to version ASCOM 6.4RC1 and
> everything went fine.
>
> You mentioned ASCOM 6.5 SP1 beta version but I'm a bit confused.  Is the beta 6.5RC1 version the same as
> non-beta 6.5RC1?
>
> Regards,
> Yves
>
>
>
> Le 31/10/20 12:31, Ray Gralak <groups3@...> a écrit :
>
>  Hi Andrew,
>
>  > If you could provide an update on when this issue will be
>  > fixed that would be great.
>
>  Actually, I reported on this a couple of weeks ago. ASCOM 6.5 Service Pack 1 will fix the bug (which is in
> ASCOM, not APCC).
>
>  However, if you want to try the beta version of ASCOM 6.5 SP1, which I have tested and confirmed has the
> fix, then here is the link:
>
>  https://download.ascom-standards.org/beta/ASCOMPlatform65.exe
>
>  -Ray Gralak
>  Author of PEMPro
>  Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
>  Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver
>
>  > -----Original Message-----
>  > From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Andrew Jones
>  > Sent: Saturday, October 31, 2020 2:20 AM
>  > To: main@ap-gto.groups.io
>  > Subject: Re: [ap-gto] Do NOT use ASCOM Platform v. 6.5 with APCC Pro #APCC #ASCOM_V2_Driver
>  >
>  > Hi Howard.
>  >
>  > I spent half the night trying to create a new APPM model using ASCOM 6.5 and getting the same plate
> solve
>  > results for every image. I was about to post the issue here, when I saw your post. Any eta on when this
> issue will
>  > be resolved? I am kind of caught in a catch-22 at the moment as the latest version of SGP  and other
> software I
>  > am using to control my rig now requires ASCOM 6.5. If you could provide an update on when this issue
> will be
>  > fixed that would be great.
>  >
>  > Andrew J
>  >
>
>
>
>
>
>
>
>
>