Re: Mach1 play in RA Axis - did not adjust out with Gear Mesh adjustment
toggle quoted messageShow quoted text
Before you do that, go back to my first post and do what I suggested.
Then, with the lever half way up (90 degrees from fully locked), gently push on the counterweight shaft with 1 finger back and forth and see if the axis rocks. Very gentle push back and forth, 1 finger.
From: John Davis <johncdavis200@...>
Sent: Thu, Oct 1, 2020 9:26 am
Subject: Re: [ap-gto] Mach1 play in RA Axis - did not adjust out with Gear Mesh adjustment
Ok. Removed the cover for the worm. I did not feel any movement of the Worm when I moved the clutch assembly. So that does not appear to be the problem.
On to the main bearing retainer nut...