Re: A bunch of APCC woes...


Ray Gralak
 

Tom,

Let's add a couple of more issues...after rebooting, the virtual ports I was using disappeared. They were replaced
with two others. These two do not show up in the Windows device manager, nor do they show up in the ASCOM
settings.
Tom, you are overthinking this. You don't have to worry about setting up the AP V2 ASCOM driver. APCC will auto-configure the AP V2 ASCOM driver if you set the options I suggested in my last post.

And BTW, the virtual ports do not stick around through a computer reboot. They are created when you run APCC.

Lastly, please take a look at the help file! Here's a link to the online version of one of the first pages you should read:

https://www.siriusimaging.com/Help/APCC/getting_started_workflow.htm

Thanks,

-Ray Gralak
Author of PEMPro
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Tom Blahovici
Sent: Sunday, September 20, 2020 6:11 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] A bunch of APCC woes...

Let's add a couple of more issues...after rebooting, the virtual ports I was using disappeared. They were replaced
with two others. These two do not show up in the Windows device manager, nor do they show up in the ASCOM
settings.

Tom

Join main@ap-gto.groups.io to automatically receive all group messages.