Re: Mach-2 can not reach target
toggle quoted messageShow quoted text
The :LRO# limits are not set at the meridian, they are set with the scope completely upside down and they prevent the scope from wrapping around and causing internal cord wrap. DO NOT turn these limits off!
From: Howard Hedlund <howard@...>
Sent: Mon, Aug 17, 2020 2:32 pm
Subject: Re: [ap-gto] Mach-2 can not reach target
Correction: Sending $LR0# and $LR2# is for the ENCODER limits, not the internal limits. Turn the internal limits off by sending :LR0#. :LR2# turns them back on.