Re: Mach-2 can not reach target

Roland Christen

The :LRO# limits are not set at the meridian, they are set with the scope completely upside down and they prevent the scope from wrapping around and causing internal cord wrap. DO NOT turn these limits off!


-----Original Message-----
From: Howard Hedlund <howard@...>
Sent: Mon, Aug 17, 2020 2:32 pm
Subject: Re: [ap-gto] Mach-2 can not reach target

Correction:  Sending $LR0#  and $LR2#  is for the ENCODER limits, not the internal limits.  Turn the internal limits off by sending  :LR0#.  :LR2#  turns them back on.

Join to automatically receive all group messages.