Re: Help With APPM and Dome Slewing/Camera Image Not In Sync


Ray Gralak
 

Hi Tony,

I noticed that the Dec reading during the APPM run is "0" when the CW is up and "7.0" when the CW is down...is
that normal?
I don't know what you mean by this. Your screenshot is too small to see any detail.

-Ray Gralak
Author of APCC (Astro-Physics Command Center): https://www.astro-physics.com/apcc-pro
Author of PEMPro V3: https://www.ccdware.com
Author of Astro-Physics V2 ASCOM Driver: https://www.siriusimaging.com/apdriver

-----Original Message-----
From: main@ap-gto.groups.io [mailto:main@ap-gto.groups.io] On Behalf Of Tony Benjamin
Sent: Thursday, August 13, 2020 10:05 PM
To: main@ap-gto.groups.io
Subject: Re: [ap-gto] Help With APPM and Dome Slewing/Camera Image Not In Sync

[Edited Message Follows]

The message I was getting was "Maximum Plate Solve Time Exceeded". It was set to 10 sec, so I upped that to
45 sec and all looks good again...I think :)

I noticed that the Dec reading during the APPM run is "0" when the CW is up and "7.0" when the CW is down...is
that normal?


Join main@ap-gto.groups.io to automatically receive all group messages.