Re: large alignment error with polemaster & mach2


Andrea Lucchetti
 

thank you!
need to check the location I entered in Polemaster software too!
that could be the simple reason for my problem...

Il giorno sab 1 ago 2020 alle ore 20:52 Brian Valente <bvalente@...> ha scritto:
>>>I will give a chance to the pole master+SC software.

in my experience it works fantastically well

one note: make sure you enter the setup information correctly in Sharpcap. It's not clear but you need to ensure you enter your location/date/time and also your image scale. it doesn't really warn you about that



On Sat, Aug 1, 2020 at 11:42 AM Andrea Lucchetti <andlucchett@...> wrote:
Thank you, 
I will give a chance to the pole master+SC software.
If it doesn’t work , I will probably go for the Rapas.
Andrea

Il giorno sab 1 ago 2020 alle 16:41 uncarollo2 <chris1011@...> via groups.io <chris1011=aol.com@groups.io> ha scritto:
The Rapas will require you to drift align the mount for the first time. Then you adjust the Rapas precisely using the 3 push-pull screws. From then on you can get good polar alignment using the pole scope without having to do any other alignment.

Rolando



-----Original Message-----
From: Andrea Lucchetti <andlucchett@...>
To: main@ap-gto.groups.io
Sent: Sat, Aug 1, 2020 7:51 am
Subject: [ap-gto] large alignment error with polemaster & mach2

Hello,
I need to polar align my Mach 2 very quickly to save time on field.
I thought Polemaster would have been a good choice but I cant get a good alignment with it (I am ways off)
The procedure goes very well, till the end, including the precise alignment step, but I have drift in my images.
running the Polemaster twice results in a small change.


I am not using the refraction calculation , as I leave at 42 deg latitude: can this be one of the reason?

my aim is to shoot 10 min subs unguided (@790mm focal and 1,6 arcsec/pixel resolution).

I still don't have my OTA ready so it is difficult for me to check with the drift method for the time being ( I can borrow a dslr and C8)

Would the RAPAS be a better solution for my needs? 
I understand it can be mounted on the MACH2 using a dovetail, with repeatable accuracy.
Is the accuracy enough for imaging and how it compares to Polemaster?

Thank you,
Andrea



--
Brian 



Brian Valente

Join main@ap-gto.groups.io to automatically receive all group messages.