Re: Mach1 and GTOCP4 Yellow Light

Christopher Erickson

Swap the two Y-cable motor connectors on the motors with each other and see if the problem switches to the DEC motor. Then report back.


On Fri, Jul 10, 2020 at 5:49 PM Mikko Viljamaa <mikko.viljamaa@...> wrote:

Yes previously the slew took longer and was more random. So long that a couple of times I had to cut the power so that the scope won’t hit the tripod. No encoders in Mach1, not at least in mine.

If by a connector you mean the Y cable I already tried another cable. I’m not sure how I could check the connector itself.



Join to automatically receive all group messages.